From 2f1f26c0b570e125ddd13b3e6c12ae4ebec2d6e4 Mon Sep 17 00:00:00 2001 From: shaoxiang <1026025056@qq.com> Date: Fri, 12 Jul 2019 14:12:51 +0800 Subject: [PATCH] delete old compare table --- docs/en/core/basic.md | 13 +------------ docs/en/core/face_kit.md | 13 +------------ docs/en/core/fire.md | 12 +----------- docs/en/core/gray.md | 12 +----------- docs/en/core/m5go.md | 13 +------------ docs/en/core/m5go_lite.md | 12 +----------- docs/en/core/m5stick.md | 11 ----------- docs/zh_CN/core/basic.md | 15 +-------------- docs/zh_CN/core/face_kit.md | 15 +-------------- docs/zh_CN/core/fire.md | 14 +------------- docs/zh_CN/core/gray.md | 10 ---------- docs/zh_CN/core/m5go.md | 11 ----------- docs/zh_CN/core/m5go_lite.md | 11 ----------- docs/zh_CN/core/m5stick.md | 10 ---------- docs/zh_CN/module/lte.md | 2 +- 15 files changed, 10 insertions(+), 164 deletions(-) diff --git a/docs/en/core/basic.md b/docs/en/core/basic.md index 8d593fb6..9ec4bbb0 100644 --- a/docs/en/core/basic.md +++ b/docs/en/core/basic.md @@ -149,19 +149,8 @@ M5Stack Basic is consist with two separable parts. the upside part has all kinds -**Notice1：** -*Comparision Between Different Development Kits of M5* - -- *For details click [here](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *Download chart click [here](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - - -**Notice2：M5PORT EXPLAIN** +**Notice1：M5PORT EXPLAIN** *You can identify the port name and function by its color, red is PortA(21/22) mainly used for I2C, black is PortB(26/36) which can be used for AD/DA, Singel-bus communication, Blue is PortC(16/17) can be used for Uart. Correspondingly, most of the M5 Units have the Port with matched color for specify which port it should go in on the M5Core. Those port identification is a convenience for UIFlow (Blockly) Users. For advanced using ,you can do you own customization, since most of the PIN on ESP32 are remapping-able. Unfortunatly, PortA(red) can not be used as analog read in. It refers to GPIO 21 & 22 from ESP32, which doesn't have AD channel alternatives:
diff --git a/docs/en/core/face_kit.md b/docs/en/core/face_kit.md index a5d99317..9d2d615e 100644 --- a/docs/en/core/face_kit.md +++ b/docs/en/core/face_kit.md @@ -67,20 +67,9 @@ Other than 3 functional panels, this development kit comes with more stuff like - **Register Manual** - [IP5306](https://github.com/m5stack/M5-Schematic/blob/master/Core/IIC_IP5306_REG_V1.4.pdf) -### NOTE -**Notice1** -*The [Gray](zh_CN/core/gray) M5core is included in the FACES Kit. Similarly, other versions of M5Core can be stacked on the base of the FACES. The following picture is a comparison of their main differences.* - -- *For details click [here](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)* - -- *Download chart click[here](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)* - - - - -**Notice2：M5PORT EXPLAIN**
+**Notice1：M5PORT EXPLAIN**
*You can identify the port name and function by its color, red is PortA(21/22) mainly used for I2C, black is PortB(26/36) which can be used for AD/DA, Singel-bus communication, Blue is PortC(16/17) can be used for Uart. Correspondingly, most of the M5 Units have the Port with matched color for specify which port it should go in on the M5Core. Those port identification is a convenience for UIFlow (Blockly) Users. For advanced using ,you can do you own customization, since most of the PIN on ESP32 are remapping-able. Unfortunatly, PortA(red) can not be used as analog read in. It refers to GPIO 21 & 22 from ESP32, which doesn't have AD channel alternatives:
diff --git a/docs/en/core/fire.md b/docs/en/core/fire.md index cfa180bb..a1d26006 100644 --- a/docs/en/core/fire.md +++ b/docs/en/core/fire.md @@ -172,19 +172,9 @@ Supported development platforms and program languages: Arduino, Blockly language -**Notice1：** -*Comparision Between Different Development Kits* -- *For details click [here](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *Download chart click[here](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - - -**Notice2：M5PORT EXPLAIN ** +**Notice1：M5PORT EXPLAIN ** *You can identify the port name and function by its color, red is PortA(21/22) mainly used for I2C, black is PortB(26/36) which can be used for AD/DA, Singel-bus communication, Blue is PortC(16/17) can be used for Uart. Correspondingly, most of the M5 Units have the Port with matched color for specify which port it should go in on the M5Core. Those port identification is a convenience for UIFlow (Blockly) Users. For advanced using ,you can do you own customization, since most of the PIN on ESP32 are remapping-able. Unfortunatly, PortA(red) can not be used as analog read in. It refers to GPIO 21 & 22 from ESP32, which doesn't have AD channel alternatives:
diff --git a/docs/en/core/gray.md b/docs/en/core/gray.md index fefc2dc3..810fcdaf 100644 --- a/docs/en/core/gray.md +++ b/docs/en/core/gray.md @@ -184,19 +184,9 @@ Supported development platforms and program languages: Arduino, Blockly language -**Notice1：** -*Comparision Between Different Development Kits* -- *For details click [here](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *Download chart click[here](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - - -**Notice2：M5PORT EXPLAIN** +**Notice1：M5PORT EXPLAIN** *You can identify the port name and function by its color, red is PortA(21/22) mainly used for I2C, black is PortB(26/36) which can be used for AD/DA, Singel-bus communication, Blue is PortC(16/17) can be used for Uart. Correspondingly, most of the M5 Units have the Port with matched color for specify which port it should go in on the M5Core. Those port identification is a convenience for UIFlow (Blockly) Users. For advanced using ,you can do you own customization, since most of the PIN on ESP32 are remapping-able. Unfortunatly, PortA(red) can not be used as analog read in. It refers to GPIO 21 & 22 from ESP32, which doesn't have AD channel alternatives:
diff --git a/docs/en/core/m5go.md b/docs/en/core/m5go.md index e73d7455..499fa3c9 100644 --- a/docs/en/core/m5go.md +++ b/docs/en/core/m5go.md @@ -165,19 +165,8 @@ This M5GO kit is specifically designed for STEM education. The pack includes 1 M -**Notice1：** -*Comparision Between Different Development Kits* - -- *For details click [here](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *Download chart click[here](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - - -**Notice2：M5PORT EXPLAIN** +**Notice1：M5PORT EXPLAIN** *You can identify the port name and function by its color, red is PortA(21/22) mainly used for I2C, black is PortB(26/36) which can be used for AD/DA, Singel-bus communication, Blue is PortC(16/17) can be used for Uart. Correspondingly, most of the M5 Units have the Port with matched color for specify which port it should go in on the M5Core. Those port identification is a convenience for UIFlow (Blockly) Users. For advanced using ,you can do you own customization, since most of the PIN on ESP32 are remapping-able. Unfortunatly, PortA(red) can not be used as analog read in. It refers to GPIO 21 & 22 from ESP32, which doesn't have AD channel alternatives: diff --git a/docs/en/core/m5go_lite.md b/docs/en/core/m5go_lite.md index 3f2aab1c..d3e61444 100644 --- a/docs/en/core/m5go_lite.md +++ b/docs/en/core/m5go_lite.md @@ -166,19 +166,9 @@ All M5stack development board can be programmed through Arduino IDE, WebIDE UIFl -**Notice1：** -*Comparision Between Different Development Kits* -- *For details click [here](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *Download chart click[here](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - - -**Notice2：M5PORT EXPLAIN** +**Notice1：M5PORT EXPLAIN** *You can identify the port name and function by its color, red is PortA(21/22) mainly used for I2C, black is PortB(26/36) which can be used for AD/DA, Singel-bus communication, Blue is PortC(16/17) can be used for Uart. Correspondingly, most of the M5 Units have the Port with matched color for specify which port it should go in on the M5Core. Those port identification is a convenience for UIFlow (Blockly) Users. For advanced using ,you can do you own customization, since most of the PIN on ESP32 are remapping-able. Unfortunatly, PortA(red) can not be used as analog read in. It refers to GPIO 21 & 22 from ESP32, which doesn't have AD channel alternatives:
diff --git a/docs/en/core/m5stick.md b/docs/en/core/m5stick.md index d4336305..9f77655e 100644 --- a/docs/en/core/m5stick.md +++ b/docs/en/core/m5stick.md @@ -107,17 +107,6 @@ M5stick is one of the core devices in M5Stack product series which is built in a 9-Axis posture sentsor: MPU9250SCLSDA -**Notice：** - -*Comparision Between Different Development Kits* - -- *For details click [here](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *Download chart click[here](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - ## Include diff --git a/docs/zh_CN/core/basic.md b/docs/zh_CN/core/basic.md index db20fe7b..497ab1a4 100644 --- a/docs/zh_CN/core/basic.md +++ b/docs/zh_CN/core/basic.md @@ -144,20 +144,7 @@ M5Stack Basic 由两个可分离部分堆叠组成. 顶部放置了电路板， -**注意：** - -*我们有 Core 有几个版本，下图是它们主要区别的比较。* - -- *如果想**查看**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *如果想**下载**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - - - -**Notice2：M5PORT 说明 ** +**Notice：M5PORT 说明 ** *不同颜色的GROVE端口分别代表不同的功能.红色的PortA（21/22），为默认的I2C协议接口，黑色的PortB（26/36）, 支持AD/DA转换与信号总线通信.蓝色的PortC（16/17）, 支持Uart串口通信.在使用Unit进行功能拓展的时候，只需要匹配二者的端口的颜色，相应的进行连接即可正常使用.不仅提供简洁的硬件连接方式，还支持引脚的重映射.PortA（红色）被作为信号总线连接至是ESP32的GPIO21/22 ，没有AD通道转换方案，因此不能用作模拟输入使用. 使用AD读取功能: diff --git a/docs/zh_CN/core/face_kit.md b/docs/zh_CN/core/face_kit.md index 08d91e4f..4bd73354 100644 --- a/docs/zh_CN/core/face_kit.md +++ b/docs/zh_CN/core/face_kit.md @@ -74,21 +74,8 @@ - **寄存器手册** - [IP5306](https://github.com/m5stack/M5-Schematic/blob/master/Core/IIC_IP5306_REG_V1.4.pdf) -### 注意： -*FACES Kit 中配置了[灰色版本](https://docs.m5stack.com/#/zh_CN/core/gray)的 Core，而我们的 Core 有几个版本，同样可以将其他版本的 Core 堆叠到 FACES 的底座上用。下图是它们主要区别的比较，方便您使用。* - -- *如果想**查看**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *如果想**下载**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - - - - -**注意2：M5PORT 说明 ** +**Notice：M5PORT 说明 ** *不同颜色的GROVE端口分别代表不同的功能.红色的PortA（21/22），为默认的I2C协议接口，黑色的PortB（26/36）, 支持AD/DA转换与信号总线通信.蓝色的PortC（16/17）, 支持Uart串口通信.在使用Unit进行功能拓展的时候，只需要匹配二者的端口的颜色，相应的进行连接即可正常使用.不仅提供简洁的硬件连接方式，还支持引脚的重映射.PortA（红色）被作为信号总线连接至是ESP32的GPIO21/22 ，没有AD通道转换方案，因此不能用作模拟输入使用. 使用AD读取功能: diff --git a/docs/zh_CN/core/fire.md b/docs/zh_CN/core/fire.md index 767b4271..6e48fa49 100644 --- a/docs/zh_CN/core/fire.md +++ b/docs/zh_CN/core/fire.md @@ -183,20 +183,8 @@ M5Stack Fire 配有三个可分离部件. 顶部与其他的M5主机一样，放 -**注意：** -*我们有 Core 有几个版本，下图是它们主要区别的比较。* - -- *如果想**查看**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *如果想**下载**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - - - -**Notice2：M5PORT 说明 ** +**Notice：M5PORT 说明 ** *不同颜色的GROVE端口分别代表不同的功能.红色的PortA（21/22），为默认的I2C协议接口，黑色的PortB（26/36）, 支持AD/DA转换与信号总线通信.蓝色的PortC（16/17）, 支持Uart串口通信.在使用Unit进行功能拓展的时候，只需要匹配二者的端口的颜色，相应的进行连接即可正常使用.不仅提供简洁的硬件连接方式，还支持引脚的重映射.PortA（红色）被作为信号总线连接至是ESP32的GPIO21/22 ，没有AD通道转换方案，因此不能用作模拟输入使用. 使用AD读取功能: diff --git a/docs/zh_CN/core/gray.md b/docs/zh_CN/core/gray.md index f48dc21d..104eb3dc 100644 --- a/docs/zh_CN/core/gray.md +++ b/docs/zh_CN/core/gray.md @@ -167,17 +167,7 @@ -**注意：** -*我们有Core有几个版本，下图是它们主要区别的比较。* - -- *如果想**查看**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *如果想**下载**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - **Notice2：M5PORT 说明 ** diff --git a/docs/zh_CN/core/m5go.md b/docs/zh_CN/core/m5go.md index 9baa239c..f49b5534 100644 --- a/docs/zh_CN/core/m5go.md +++ b/docs/zh_CN/core/m5go.md @@ -171,17 +171,6 @@ -**注意：** - -*我们有 Core 有几个版本，下图是它们主要区别的比较。* - -- *如果想**查看**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *如果想**下载**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - **Notice2：M5PORT 说明 ** diff --git a/docs/zh_CN/core/m5go_lite.md b/docs/zh_CN/core/m5go_lite.md index 9bb39c9b..f30ab704 100644 --- a/docs/zh_CN/core/m5go_lite.md +++ b/docs/zh_CN/core/m5go_lite.md @@ -172,17 +172,6 @@ -**注意：** - -*我们有Core有几个版本，下图是它们主要区别的比较。* - -- *如果想**查看**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *如果想**下载**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - **Notice2：M5PORT 说明 ** *不同颜色的GROVE端口分别代表不同的功能.红色的PortA（21/22），为默认的I2C协议接口，黑色的PortB（26/36）, 支持AD/DA转换与信号总线通信.蓝色的PortC（16/17）, 支持Uart串口通信.在使用Unit进行功能拓展的时候，只需要匹配二者的端口的颜色，相应的进行连接即可正常使用.不仅提供简洁的硬件连接方式，还支持引脚的重映射.PortA（红色）被作为信号总线连接至是ESP32的GPIO21/22 ，没有AD通道转换方案，因此不能用作模拟输入使用. diff --git a/docs/zh_CN/core/m5stick.md b/docs/zh_CN/core/m5stick.md index 6e92756f..d96b1453 100644 --- a/docs/zh_CN/core/m5stick.md +++ b/docs/zh_CN/core/m5stick.md @@ -106,17 +106,7 @@ M5stick 是 M5Stack 产品系列中的核心设备之一，该产品系列建立 九轴姿态传感器MPU9250SCLSDA -**注意：** -*我们有Core有几个版本，下图是它们主要区别的比较。* - -- *如果想**查看**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - -- *如果想**下载**详细的资源对比，请点击[这里](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* - - - - ## 包含 diff --git a/docs/zh_CN/module/lte.md b/docs/zh_CN/module/lte.md index 334dfaa0..2bd26325 100644 --- a/docs/zh_CN/module/lte.md +++ b/docs/zh_CN/module/lte.md @@ -8,7 +8,7 @@ ## 描述 -**LTE** 是M5Stack堆叠模块系列中的一款，LTE通信模块.内部集成**M8321** LTE工业级通信模组. 提供 TD-LTE/FDD-LTE/WCDMA/TDSCDMA/GSM/GPRS/EDGE 的频段.丰富的 Internet 协议、行业标准接口和丰富的功能,支持多种操作系统的USB驱动程序，能够给用户带来快速且稳定的通信体验. +**LTE** 是M5Stack堆叠模块系列中的一款，LTE通信模块.内部集成**M8321** LTE工业级通信模组. 提供 TD-LTE/FDD-LTE/WCDMA/TDSCDMA/GSM/GPRS/EDGE 的频段.丰富的 Internet 协议、行业标准接口和功能,支持多种操作系统的USB驱动程序，能够给用户带来快速且稳定的通信体验. ## 产品特性