diff --git a/docs/en/app/m5scale_diy_kit.md b/docs/en/app/m5scale_diy_kit.md
index ffa7878a..3f8c01ac 100644
--- a/docs/en/app/m5scale_diy_kit.md
+++ b/docs/en/app/m5scale_diy_kit.md
@@ -64,7 +64,7 @@ The lego holes on bottom board allow you to place more M5 sensors for extension
 
 <img src="https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/EasyLoader_logo.webp" width="100px" style="margin-top:20px">
 
-<a href="https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/Application/M5SCALE_DIY_KIT/EasyLoader_APP_M5Scale_diy_kit.exe"><button type="button" class="btn btn-primary">click to download EasyLoader</button></a>
+<a href="https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/Windows/APPLICATION/EasyLoader_M5SCALE_APPLICATION.exe"><button type="button" class="btn btn-primary">click to download EasyLoader</button></a>
 
 >1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed. .
 
diff --git a/docs/en/base/lan_base.md b/docs/en/base/lan_base.md
index 3ad03e4b..9cc067fc 100644
--- a/docs/en/base/lan_base.md
+++ b/docs/en/base/lan_base.md
@@ -6,7 +6,7 @@
 
 ## Description
 
-Although M5 core is ESP32-based, having Wi-Fi and Bluetooth intergrated, it doesn't stop you enable the Ethernet function. This **LAN** is a M5 Base that having a W5500 chip, which is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. This Base is speciffically design for industrial application scenarioes, comes with couple of HT3.96 connectors, 485(?) metal rail and magnet discs for easy installation and fixation.The 6 pin of HT3.96 connector are dangling, you can wired them up with the M-BUS and other circuit as you like.
+Although M5 core is ESP32-based, having Wi-Fi and Bluetooth intergrated, it doesn't stop you enable the Ethernet function. This **LAN** is a M5 Base that having a W5500 chip, which is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. This Base is speciffically design for industrial application scenarioes, comes with couple of HT3.96 connectors, 485 metal rail and magnet discs for easy installation and fixation.The 6 pin of HT3.96 connector are dangling, you can wired them up with the M-BUS and other circuit as you like.
 
 **The figure below shows the inner of LAN**
 
diff --git a/docs/en/core/m5stickc.md b/docs/en/core/m5stickc.md
index 2c97eb89..843031d5 100644
--- a/docs/en/core/m5stickc.md
+++ b/docs/en/core/m5stickc.md
@@ -309,7 +309,7 @@ For a tutorial on uiflow, see [here](https://docs.m5stack.com/#/en/uiflow/uiflow
 
 <script>
 
-   var purchase_link = 'https://m5stack.com/collections/m5-core/products/basic-core-iot-development-kit';
+   var purchase_link = 'https://m5stack.com/collections/m5-core/products/stick-c';
 
    var quickstart_link = 'https://docs.m5stack.com/#/en/quick_start/m5stickc/m5stickc_quick_start';
 
diff --git a/docs/en/core/m5stickc_plus.md b/docs/en/core/m5stickc_plus.md
new file mode 100644
index 00000000..e69de29b
diff --git a/docs/en/hat/hat-adc.md b/docs/en/hat/hat-adc.md
index 7251919a..776738f4 100644
--- a/docs/en/hat/hat-adc.md
+++ b/docs/en/hat/hat-adc.md
@@ -39,6 +39,14 @@ ADS1100 itself is able to accept a differential input from -5 ~ +5 V, but we hav
 
 -  **Datasheet** - [ADS1100](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/ads1100_en.pdf)
 
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>HAT ADC</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
+</table>
+
+
 ## Schematic
 
 <img src="assets/img/product_pics/hat/adc_hat/adc_hat_04.webp" width="80%" height="80%">
@@ -65,12 +73,6 @@ Open http://flow.m5stack.com and Load Demo
 
 <img src="assets/img/product_pics/hat/adc_hat/adc.webp">
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>HAT ADC</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
-</table>
 
 <script>
 
diff --git a/docs/en/hat/hat-dac.md b/docs/en/hat/hat-dac.md
index cc177db5..4709fe7c 100644
--- a/docs/en/hat/hat-dac.md
+++ b/docs/en/hat/hat-dac.md
@@ -45,7 +45,14 @@ I2C address: 0x60
 ## Links
 
 -  **Datasheet** - [MCP4725](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/MCP4725_en.pdf)
-  
+
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>HAT ADC</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 <img src="assets/img/product_pics/hat/dac_hat/dac_hat_04.webp" width="80%" height="80%">
@@ -72,13 +79,6 @@ Open http://flow.m5stack.com and Load Demo
 
 <img src="assets/img/product_pics/hat/dac_hat/dac.webp">
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>HAT ADC</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/m5stickc-dac-hat-mcp4725';
diff --git a/docs/en/hat/hat-env.md b/docs/en/hat/hat-env.md
index 79809d3d..e8e1c7a0 100644
--- a/docs/en/hat/hat-env.md
+++ b/docs/en/hat/hat-env.md
@@ -48,6 +48,13 @@
 
 - **[BMM150 Datasheet](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/BMM150_datasheet_en.pdf)**
 
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>3.3V</td><td>GND</td></tr>
+ <tr><td>HAT ENV</td><td>SDA</td><td>SCL</td><td>3.3V</td><td>GND</td></tr>
+</table>
+
 ## EasyLoader
 
 >EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host [Please click here to view the CP210X driver installation tutorial](en/arduino/arduino_development), M5StickC/V/T/ATOM series can be used without driver)
@@ -87,13 +94,6 @@ Open http://flow.m5stack.com and Load Demo
 
 <img src="assets/img/product_pics/hat/env_hat/env.webp">
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>HAT ENV</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/m5stickc-env-hat';
diff --git a/docs/en/hat/hat-joystick.md b/docs/en/hat/hat-joystick.md
index 4329ce17..722f958e 100644
--- a/docs/en/hat/hat-joystick.md
+++ b/docs/en/hat/hat-joystick.md
@@ -61,6 +61,13 @@ Register:
 
 > Joystick calibration method：First i2c writes register 0x03 and then sends 0x02, the joystick is rotated several times around the top, bottom, left and right, and then 0x03 is saved in register 0x03.
 
+## Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>3.3V</td><td>GND</td></tr>
+ <tr><td>Joystick HAT</td><td>SDA</td><td>SCL</td><td>3.3V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 <img src="assets\img\product_pics\hat\joystick_hat\joystick_hat_07.webp" width="60%">
@@ -85,13 +92,6 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets\img\product_pics\hat\joystick_hat\joystick.webp" width="60%">
 
-## Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>3.3V</td><td>GND</td></tr>
- <tr><td>Joystick HAT</td><td>SDA</td><td>SCL</td><td>3.3V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/products/m5stickc-joystick-hat';
diff --git a/docs/en/hat/hat-ncir.md b/docs/en/hat/hat-ncir.md
index 9701a215..6c87179e 100644
--- a/docs/en/hat/hat-ncir.md
+++ b/docs/en/hat/hat-ncir.md
@@ -32,6 +32,13 @@ Connect with M5StickC via GOIO 0/26 (I2C add: 0x5A).<br>
 -  Body Temperature Measurement
 -  Object (biological) Motion Detection
 
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>3.3V</td><td>GND</td></tr>
+ <tr><td>HAT NCIR</td><td>SDA</td><td>SCL</td><td>3.3V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 <img src="assets\img\product_pics\hat\ncir_hat\hat_ncir_04.webp" width="50%" height="50%">
@@ -62,13 +69,6 @@ Open http://flow.m5stack.com and Load Demo
 
 <img src="assets\img\product_pics\hat\ncir_hat\ncir.webp">
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>HAT NCIR</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/m5stickc-ncir-hatmlx90614';
diff --git a/docs/en/hat/hat-neoflash.md b/docs/en/hat/hat-neoflash.md
index 3000ad9e..a4516796 100644
--- a/docs/en/hat/hat-neoflash.md
+++ b/docs/en/hat/hat-neoflash.md
@@ -41,6 +41,13 @@ If you thinking about adding a display on your project, NeoFlash is a good choic
 
 <img src="assets\img\product_pics\hat\neoflash_hat\neoflash_hat_06.webp" height="300px"><img src="assets\img\product_pics\hat\neoflash_hat\neoflash_hat_07.webp" height="300px">
 
+## Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>Neoflash HAT</td><td>DATA</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 <img src="assets\img\product_pics\hat\neoflash_hat\neoflash_hat_08.webp" width="30%"> 
@@ -61,13 +68,6 @@ If you thinking about adding a display on your project, NeoFlash is a good choic
 
 To get complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Hat/neoflash-hat/Arduino)
 
-## Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>Neoflash HAT</td><td>DATA</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/products/m5stickc-neofalsh-hat';
diff --git a/docs/en/hat/hat-pir.md b/docs/en/hat/hat-pir.md
index f8fb18ae..a2b3109f 100644
--- a/docs/en/hat/hat-pir.md
+++ b/docs/en/hat/hat-pir.md
@@ -32,6 +32,13 @@
 
 <img src="assets\img\product_pics\hat\pir_hat\pir_hat_04.webp" width="50%" height="50%">
 
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO36</td><td>5V</td><td>GND</td></tr>
+ <tr><td>HAT PIR</td><td>OUT</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## EasyLoader
 
 >EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host [Please click here to view the CP210X driver installation tutorial](en/arduino/arduino_development), M5StickC/V/T/ATOM series can be used without driver)
@@ -71,12 +78,6 @@ Open http://flow.m5stack.com and click Demo to load
 
 <img src="assets\img\product_pics\hat\pir_hat\pir.webp">
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO36</td><td>5V</td><td>GND</td></tr>
- <tr><td>HAT PIR</td><td>OUT</td><td>5V</td><td>GND</td></tr>
-</table>
 <!--
 ## Video
 **Demo** 
diff --git a/docs/en/hat/hat-powerc.md b/docs/en/hat/hat-powerc.md
index b510b54a..5256521e 100644
--- a/docs/en/hat/hat-powerc.md
+++ b/docs/en/hat/hat-powerc.md
@@ -37,6 +37,15 @@
 - **[IP5209 Datasheet](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/IP5209.pdf)**
 - **[IP3005 Datasheet](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/IP3005-INJOINIC.pdf)**
 
+
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>PowerC</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
+<tr><td>PortA</td><td>YELLO</td><td>WHITE</td><td>RED</td><td>BLACK</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino
@@ -76,15 +85,6 @@ If you want the complete code, please click [here](https://github.com/m5stack/M5
     </div>
 </div>
 
-
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>PowerC</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
-<tr><td>PortA</td><td>YELLO</td><td>WHITE</td><td>RED</td><td>BLACK</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/m5stickc-powerc';
diff --git a/docs/en/hat/hat-rs485.md b/docs/en/hat/hat-rs485.md
index f99e3cbc..0319dea3 100644
--- a/docs/en/hat/hat-rs485.md
+++ b/docs/en/hat/hat-rs485.md
@@ -38,7 +38,14 @@ It is used to convert the TTL standard to the RS485 standard. If the outside ser
 ## Links
 
 -  **Datasheet** - [SP485EEN](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/SP485EEN_en.pdf)
-  
+
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>HAT ADC</td><td>TX</td><td>RX</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 <img src="assets/img/product_pics/hat/rs485_hat/rs485_hat_04.webp" width="80%" height="80%">
@@ -62,13 +69,6 @@ It is used to convert the TTL standard to the RS485 standard. If the outside ser
 
 To get complete code, please click [here](https://github.com/m5stack/M5StickC/tree/master/examples/Hat/RS485)
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>HAT ADC</td><td>TX</td><td>RX</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/m5stickc-rs485-hat-aoz1282ci';
diff --git a/docs/en/hat/hat-spk.md b/docs/en/hat/hat-spk.md
index e54e3545..005ed2ec 100644
--- a/docs/en/hat/hat-spk.md
+++ b/docs/en/hat/hat-spk.md
@@ -24,6 +24,13 @@
 
 - MP4/MP3
 
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>HAT SPK</td><td>SD</td><td>IN-</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 - **[Schematic](https://github.com/m5stack/M5-Schematic/blob/master/Hat/StickHat_SPK.pdf)**
@@ -73,13 +80,6 @@ Open http://flow.m5stack.com and Load Demo
 
 <img src="assets\img\product_pics\hat\spk_hat\spk.webp" >
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>HAT SPK</td><td>SD</td><td>IN-</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/m5stickc-speaker-hat';
diff --git a/docs/en/hat/hat-thermal.md b/docs/en/hat/hat-thermal.md
index b305f682..1a8e630b 100644
--- a/docs/en/hat/hat-thermal.md
+++ b/docs/en/hat/hat-thermal.md
@@ -40,6 +40,13 @@ The I2C address is **0x33**. (GOIO 0/26)
 -  Intrusion / Movement detection
 -  Visual IR thermometers
 
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>HAT THERMAL</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 <img src="assets\img\product_pics\hat\thermal_hat\hat_thermal_05.webp" width="60%" height="60%">
@@ -70,13 +77,6 @@ If you want the complete code, please click [here](https://github.com/m5stack/M5
 
 <img src="assets/img/product_pics/hat/thermal_hat/thermal.webp">
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>HAT THERMAL</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/m5stickc-thermal-camera-hatmlx90640';
diff --git a/docs/en/hat/hat-tof.md b/docs/en/hat/hat-tof.md
index 26a1ff0f..eed07c1e 100644
--- a/docs/en/hat/hat-tof.md
+++ b/docs/en/hat/hat-tof.md
@@ -39,6 +39,13 @@ Communication Info: I2C, **0x29**, GPIO0/26.
 
 - **[VL53L0X Datasheet](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/VL53L0X_en.pdf)**
 
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>3.3V</td><td>GND</td></tr>
+ <tr><td>ToF HAT</td><td>SDA</td><td>SCL</td><td>3.3V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 <img src="assets\img\product_pics\hat\tof_hat\tof_hat_07.webp" width="50%">
@@ -63,13 +70,6 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets\img\product_pics\hat\tof_hat\tof.webp" width="50%">
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>3.3V</td><td>GND</td></tr>
- <tr><td>ToF HAT</td><td>SDA</td><td>SCL</td><td>3.3V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/products/m5stickc-tof-hatvl53l0x';
diff --git a/docs/en/hat/hat-yun.md b/docs/en/hat/hat-yun.md
index 6b265460..712e20be 100644
--- a/docs/en/hat/hat-yun.md
+++ b/docs/en/hat/hat-yun.md
@@ -45,6 +45,13 @@ One hook hole and two 6*4mm magnet mounting positions are reserved on the board,
 - Smart home decoration
 - Fridge Magnet
 
+### Pin Map
+
+<table>
+ <tr><td>M5StickC</td><td>GND</td><td>5V OUT</td><td>GPIO26</td><td>GPIO0</td><td>GPIO36</td><td>BAT</td><td>3V3</td><td>5V IN</td></tr>
+ <tr><td>YUN HAT</td><td>GND</td><td>+5V</td><td>SCL</td><td>SDA</td><td>/</td><td>BAT</td><td>+3.3V</td><td>+5V IN</td></tr>
+</table>
+
 ## Schematic
 
 <img src="assets\img\product_pics\hat\yun_hat\yun_hat_05.webp" width="50%">
@@ -78,13 +85,6 @@ Open http://flow.m5stack.com and Load Demo
 
 <img src="assets/img/product_pics/hat/yun_hat/yun.webp">
 
-### Pin Map
-
-<table>
- <tr><td>M5StickC</td><td>GND</td><td>5V OUT</td><td>GPIO26</td><td>GPIO0</td><td>GPIO36</td><td>BAT</td><td>3V3</td><td>5V IN</td></tr>
- <tr><td>YUN HAT</td><td>GND</td><td>+5V</td><td>SCL</td><td>SDA</td><td>/</td><td>BAT</td><td>+3.3V</td><td>+5V IN</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/products/m5stickc-yun-hatsh20-bmp280-sk6812';
diff --git a/docs/en/module/gsm.md b/docs/en/module/gsm.md
index 6456f4b4..3596e47a 100644
--- a/docs/en/module/gsm.md
+++ b/docs/en/module/gsm.md
@@ -68,6 +68,14 @@ Product Feature:
 
 -  **Datasheet** - [MC6315 AT Command](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/module/M6315%20AT_Command_Interface_Specification_cn.pdf)
 
+### Pin Map
+
+<table>
+ <tr><td>M5Stack</td><td>GPIO16</td><td>GPIO17</td><td>5V</td><td>GND</td></tr>
+ <tr><td>Module GSM</td><td>RX</td><td>TX</td><td>5V</td><td>GND</td></tr>
+</table>
+
+
 ## Schematic
 
 - [GSM Module](https://github.com/m5stack/M5-Schematic/blob/master/Modules/module_gsm_sch.pdf)
@@ -91,13 +99,6 @@ Product Feature:
 
 To get complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Modules/GSM_M6315)
 
-### Pin Map
-
-<table>
- <tr><td>M5Stack</td><td>GPIO16</td><td>GPIO17</td><td>5V</td><td>GND</td></tr>
- <tr><td>Module GSM</td><td>RX</td><td>TX</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-module/products/m5stack-gsm-module';
diff --git a/docs/en/module/lte.md b/docs/en/module/lte.md
index 13d03146..9d0d609a 100644
--- a/docs/en/module/lte.md
+++ b/docs/en/module/lte.md
@@ -69,6 +69,13 @@ Product Feature:
 
 -  **Datasheet** - [M8321 AT Command](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/module/M8321%20AT_Command_Interface_Specification_cn.pdf)
 
+### Pin Map
+
+<table>
+ <tr><td>M5Stack</td><td>GPIO16</td><td>GPIO17</td><td>5V</td><td>GND</td></tr>
+ <tr><td>Module LTE</td><td>RX</td><td>TX</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 - [LTE Module](https://github.com/m5stack/M5-Schematic/blob/master/Modules/module_lte_sch.pdf)
@@ -91,14 +98,6 @@ Product Feature:
 
 To get complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Modules/LTE_M8321)
 
-### Pin Map
-
-<table>
- <tr><td>M5Stack</td><td>GPIO16</td><td>GPIO17</td><td>5V</td><td>GND</td></tr>
- <tr><td>Module LTE</td><td>RX</td><td>TX</td><td>5V</td><td>GND</td></tr>
-</table>
-
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-module/products/m5stack-lte-module';
diff --git a/docs/en/module/nb-iot.md b/docs/en/module/nb-iot.md
index ab8cde94..9a49baf4 100644
--- a/docs/en/module/nb-iot.md
+++ b/docs/en/module/nb-iot.md
@@ -100,6 +100,14 @@ only for reference
 -  **AT Command** 
   - [M5311 AT Command](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/module/M5311_AT_Command_Interface_Specification_en.pdf)
 
+### Pin Map
+
+<table>
+ <tr><td>M5Stack</td><td>GPIO16</td><td>GPIO17</td><td>3.3V</td><td>GND</td></tr>
+ <tr><td>Module NB-IoT</td><td>RX</td><td>TX</td><td>3.3V</td><td>GND</td></tr>
+</table>
+
+
 ## Schematic
 
 - [NB-IoT Module](https://github.com/m5stack/M5-Schematic/blob/master/Modules/module_nb_iot_sch.pdf)
@@ -122,13 +130,6 @@ only for reference
 
 To get complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Modules/NB-IoT_M5311LV)
 
-### Pin Map
-
-<table>
- <tr><td>M5Stack</td><td>GPIO16</td><td>GPIO17</td><td>3.3V</td><td>GND</td></tr>
- <tr><td>Module NB-IoT</td><td>RX</td><td>TX</td><td>3.3V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-module/products/m5stack-nb-iot-module';
diff --git a/docs/en/module/nb-iot_plus.md b/docs/en/module/nb-iot_plus.md
index 45da2ce9..2ccd5a2c 100644
--- a/docs/en/module/nb-iot_plus.md
+++ b/docs/en/module/nb-iot_plus.md
@@ -94,6 +94,13 @@ only for reference
 -  **AT Command** 
   - [M5311 AT Command](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/module/M5311_AT_Command_Interface_Specification_en.pdf)
 
+### Pin Map
+
+<table>
+ <tr><td>M5Stack</td><td>GPIO16</td><td>GPIO17</td><td>3.3V</td><td>GND</td></tr>
+ <tr><td>Module NB-IoT Plus</td><td>RX</td><td>TX</td><td>3.3V</td><td>GND</td></tr>
+</table>
+
 ## Schematic
 
 - [NB-IoT Plus Module](https://github.com/m5stack/M5-Schematic/blob/master/Modules/module_nb_iot_sch.pdf)
@@ -116,13 +123,6 @@ only for reference
 
 To get example code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Modules/NB-IoT-PLUS_M5311GB)
 
-### Pin Map
-
-<table>
- <tr><td>M5Stack</td><td>GPIO16</td><td>GPIO17</td><td>3.3V</td><td>GND</td></tr>
- <tr><td>Module NB-IoT Plus</td><td>RX</td><td>TX</td><td>3.3V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-module/products/m5stack-nb-iot-plus-module-m5311-gb';
diff --git a/docs/en/unit/cardkb.md b/docs/en/unit/cardkb.md
index ef0a45c8..e312ac0a 100644
--- a/docs/en/unit/cardkb.md
+++ b/docs/en/unit/cardkb.md
@@ -55,12 +55,17 @@ It also can achieve button combination(Sym+Key, Shift+Key, Fn+Key) and output ri
 
 ?>3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)[Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
 
-## PinMap
+### PinMap
 
 **Mega328 ISP**Download interface Pin foot definition
 
 <img src="assets\img\product_pics\app\mega328_isp.webp" width="30%" height="30%">
 
+<table>
+ <tr><td>M5Core(GROVE A)</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
+ <tr><td>CardKB</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino IDE
@@ -75,13 +80,6 @@ To get the complete code, please click [here](https://github.com/m5stack/M5-Prod
 
 <img src="assets/img/product_pics/unit/unit_example/CARDKB/example_unit_cardkb_02.webp">
 
-### PinMap
-
-<table>
- <tr><td>M5Core(GROVE A)</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
- <tr><td>CardKB</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/cardkb-mini-keyboard';
diff --git a/docs/en/unit/hex.md b/docs/en/unit/hex.md
index 7035f368..59dd3f4a 100644
--- a/docs/en/unit/hex.md
+++ b/docs/en/unit/hex.md
@@ -54,29 +54,6 @@ This is how LEDs layout in the panel. Pay attention to the sequence in your code
     </div>
 </div>
 
-## Example
-
-### 1. Arduino IDE
-
-FastLED library on Arduino presents excellent and colorful lighting effects.
-Before compile, it is require to install the FastLED library and connect HEX to GROVE A.
-
-RGB LED Library on Arduino
-
-- **[FastLED Library](https://github.com/FastLED/FastLED/wiki/Overview)**
-
-- **[FastLED Reference(Chinese version)](http://www.taichi-maker.com/homepage/reference-index/arduino-library-index/fastled-library/)**
-
-To get the complete code,please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/HEX_SK6812)
-
-<img src="assets/img/product_pics/unit/unit_example/HEX/example_unit_dual_button_03.webp">
-
-### 2. UIFlow
-
-To get the complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/HEX/UIFlow)
-
-<img src="assets/img/product_pics/unit/unit_example/HEX/example_unit_dual_button_01.webp" width="50%" height="50%"> <img src="assets/img/product_pics/unit/unit_example/HEX/example_unit_dual_button_02.webp" width="30%" height="30%">
-
 ### PinMap
 
 **If HEX connected to GROVE A**
@@ -102,6 +79,30 @@ To get the complete code, please click [here](https://github.com/m5stack/M5-Prod
 
 <img src="assets/img/product_pics/unit/hex/unit_hex_04.webp" width="50%">
 
+
+## Example
+
+### 1. Arduino IDE
+
+FastLED library on Arduino presents excellent and colorful lighting effects.
+Before compile, it is require to install the FastLED library and connect HEX to GROVE A.
+
+RGB LED Library on Arduino
+
+- **[FastLED Library](https://github.com/FastLED/FastLED/wiki/Overview)**
+
+- **[FastLED Reference(Chinese version)](http://www.taichi-maker.com/homepage/reference-index/arduino-library-index/fastled-library/)**
+
+To get the complete code,please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/HEX_SK6812)
+
+<img src="assets/img/product_pics/unit/unit_example/HEX/example_unit_dual_button_03.webp">
+
+### 2. UIFlow
+
+To get the complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/HEX/UIFlow)
+
+<img src="assets/img/product_pics/unit/unit_example/HEX/example_unit_dual_button_01.webp" width="50%" height="50%"> <img src="assets/img/product_pics/unit/unit_example/HEX/example_unit_dual_button_02.webp" width="30%" height="30%">
+
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/hex-neopixel-led-board';
diff --git a/docs/en/unit/ncir.md b/docs/en/unit/ncir.md
index 6e3f667b..5cb5c757 100644
--- a/docs/en/unit/ncir.md
+++ b/docs/en/unit/ncir.md
@@ -66,6 +66,13 @@ Connect with M5Core via GROVE A IIC(0x5A).
     </div>
 </div>
 
+### PinMap
+
+<table>
+ <tr><td>M5Core (GROVE A)</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
+ <tr><td>NCIR Unit</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino IDE
@@ -82,13 +89,6 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets/img/product_pics/unit/ncir_sch.JPG">
 
-### PinMap
-
-<table>
- <tr><td>M5Core (GROVE A)</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
- <tr><td>NCIR Unit</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/ncir-sensor-unit';
diff --git a/docs/en/unit/neopixel.md b/docs/en/unit/neopixel.md
index eeb3a8af..338e75f6 100644
--- a/docs/en/unit/neopixel.md
+++ b/docs/en/unit/neopixel.md
@@ -42,6 +42,14 @@
 
 ?>3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)[Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
 
+### PinMap
+
+<table>
+ <tr><td>M5Core(GROVE A)</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
+ <tr><td>NEOPIXEL Unit</td><td> </td><td>Signal Pin</td><td>5V</td><td>GND</td></tr>
+</table>
+
+
 ## Example
 
 ### 1. Arduino IDE
@@ -60,13 +68,6 @@ To get the complete code, please click [here](https://github.com/m5stack/M5-Prod
 
 <!-- <img src="assets/img/product_pics/unit/neopixel_sch.JPG"> -->
 
-### PinMap
-
-<table>
- <tr><td>M5Core(GROVE A)</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
- <tr><td>NEOPIXEL Unit</td><td> </td><td>Signal Pin</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/neopixel-rgb-leds-cable';
diff --git a/docs/en/unit/pir.md b/docs/en/unit/pir.md
index f5ddd5e1..e57340b0 100644
--- a/docs/en/unit/pir.md
+++ b/docs/en/unit/pir.md
@@ -62,6 +62,17 @@ This Unit communicates with the M5Core via the GROVE B.
     </div>
 </div>
 
+## Schematic
+
+<img src="assets/img/product_pics/unit/pir_sch.JPG">
+
+### PinMap
+
+<table>
+ <tr><td>M5Core(GROVE B)</td><td>GPIO36</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>PIR Unit</td><td>Sensor Pin</td><td> </td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino IDE
@@ -74,17 +85,6 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets/img/product_pics/unit/unit_example/PIR/example_unit_pir_03.webp">
 
-## Schematic
-
-<img src="assets/img/product_pics/unit/pir_sch.JPG">
-
-### PinMap
-
-<table>
- <tr><td>M5Core(GROVE B)</td><td>GPIO36</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>PIR Unit</td><td>Sensor Pin</td><td> </td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/pir-module';
diff --git a/docs/en/unit/relay.md b/docs/en/unit/relay.md
index 41a2cecc..8b8abbb4 100644
--- a/docs/en/unit/relay.md
+++ b/docs/en/unit/relay.md
@@ -56,6 +56,17 @@ There are 3 pins named: ON, OFF, COM. You can program to make COM connect to ON
     </div>
 </div>
 
+## Schematic
+
+<img src="assets/img/product_pics/unit/relay_sch.JPG">
+
+### PinMap
+
+<table>
+ <tr><td>M5Core(GROVE B)</td><td>GPIO36</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>RELAY Unit</td><td> </td><td>RELAY Controlling Pin</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino IDE
@@ -69,17 +80,6 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets/img/product_pics/unit/unit_example/RELAY/example_unit_relay_01.webp">
 
-## Schematic
-
-<img src="assets/img/product_pics/unit/relay_sch.JPG">
-
-### PinMap
-
-<table>
- <tr><td>M5Core(GROVE B)</td><td>GPIO36</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>RELAY Unit</td><td> </td><td>RELAY Controlling Pin</td><td>5V</td><td>GND</td></tr>
-</table>
-
 ## Video
 
 **Program with UIFlow**
diff --git a/docs/en/unit/rfid.md b/docs/en/unit/rfid.md
index a05936d6..a55b3f45 100644
--- a/docs/en/unit/rfid.md
+++ b/docs/en/unit/rfid.md
@@ -56,6 +56,17 @@ Connect this Unit to GROVE PORTA on M5Core, IIC adress is 0x28.
 
 ?>3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)[Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
 
+## Schematic
+
+<img src="assets/img/product_pics/unit/rfid_sch.JPG">
+
+### PinMap
+
+<table>
+<tr><td>M5Core ( GROVE A )</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
+ <tr><td>RFID Unit</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino IDE
@@ -74,17 +85,6 @@ After opening and burning this example using [UIFlow](http://flow.m5stack.com),
 
 <img src="assets/img/product_pics/unit/unit_example/RFID/example_unit_rfid_02.webp">
 
-## Schematic
-
-<img src="assets/img/product_pics/unit/rfid_sch.JPG">
-
-### PinMap
-
-<table>
-<tr><td>M5Core ( GROVE A )</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
- <tr><td>RFID Unit</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/rfid-sensor-unit';
diff --git a/docs/en/unit/rgb.md b/docs/en/unit/rgb.md
index 53399939..8fc29016 100644
--- a/docs/en/unit/rgb.md
+++ b/docs/en/unit/rgb.md
@@ -49,6 +49,13 @@ This is a very useful piece on STEM class, students can program it to realize so
     </div>
 </div>
 
+### PinMap
+
+<table>
+ <tr><td>M5Core(GROVE B)</td><td>GPIO36</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>RGB Unit</td><td> </td><td>Signal Pin</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino IDE
@@ -61,13 +68,6 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets/img/product_pics/unit/unit_example/RGB/example_unit_rgb_01.webp">
 
-### PinMap
-
-<table>
- <tr><td>M5Core(GROVE B)</td><td>GPIO36</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>RGB Unit</td><td> </td><td>Signal Pin</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/rgb-unit';
diff --git a/docs/en/unit/rs485.md b/docs/en/unit/rs485.md
index 3029115a..9ce547ab 100644
--- a/docs/en/unit/rs485.md
+++ b/docs/en/unit/rs485.md
@@ -42,6 +42,13 @@ It is used to convert the TTL standard to the RS485 standard. If the outside ser
 
 ?>3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)[Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
 
+### PinMap
+
+<table>
+ <tr><td>M5Core(GROVE C)</td><td>U2RXD(GPIO16)</td><td>U2TXD(GPIO17)</td><td>5V</td><td>GND</td></tr>
+ <tr><td>RS485 Unit</td><td>RS485 RXD</td><td>RS485 TXD</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino IDE
@@ -56,13 +63,6 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets/img/product_pics/unit/unit_rs485_03.webp" width="40%">
 
-### PinMap
-
-<table>
- <tr><td>M5Core(GROVE C)</td><td>U2RXD(GPIO16)</td><td>U2TXD(GPIO17)</td><td>5V</td><td>GND</td></tr>
- <tr><td>RS485 Unit</td><td>RS485 RXD</td><td>RS485 TXD</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/rs485-module';
diff --git a/docs/en/unit/thermal.md b/docs/en/unit/thermal.md
index d7f99ab8..09d538f6 100644
--- a/docs/en/unit/thermal.md
+++ b/docs/en/unit/thermal.md
@@ -57,6 +57,17 @@ The Unit communicates with the M5Core through the Grove A interface, IIC address
 
 ?>3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)[Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
 
+## Schematic
+
+<img src="assets/img/product_pics/unit/thermal_sch.JPG">
+
+### PinMap
+
+<table>
+ <tr><td>M5Core (GROVE A)</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
+ <tr><td>THERMAL Unit</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
+</table>
+
 ## Example
 
 ### 1. Arduino IDE
@@ -70,17 +81,6 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets/img/product_pics/unit/thermal.webp">
 
-## Schematic
-
-<img src="assets/img/product_pics/unit/thermal_sch.JPG">
-
-### PinMap
-
-<table>
- <tr><td>M5Core (GROVE A)</td><td>GPIO22</td><td>GPIO21</td><td>5V</td><td>GND</td></tr>
- <tr><td>THERMAL Unit</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/thermal-camera';
diff --git a/docs/en/unit/tof.md b/docs/en/unit/tof.md
index a1e8e6ce..3a8b9288 100644
--- a/docs/en/unit/tof.md
+++ b/docs/en/unit/tof.md
@@ -73,19 +73,6 @@ This unit comunicates with M5Core via I2C(0x29).
     </div>
 </div>
 
-
-## Example
-
-### 1. Arduino IDE
-
-The below code is incomplete(just for usage). If you want the complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/ToF_VL53L0X)
-
-### 2. UIFlow
-
-If you want the complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/TOF/UIFlow)
-
-<img src="assets/img/product_pics/unit/unit_example/TOF/example_unit_tof_01.webp">
-
 ## Schematic
 
 [ToF Schematic](https://github.com/m5stack/M5-Schematic/blob/master/Units/UNIT_TOF.pdf)
@@ -99,6 +86,18 @@ If you want the complete code, please click [here](https://github.com/m5stack/M5
  <tr><td>ToF Unit</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
 </table>
 
+## Example
+
+### 1. Arduino IDE
+
+The below code is incomplete(just for usage). If you want the complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/ToF_VL53L0X)
+
+### 2. UIFlow
+
+If you want the complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/TOF/UIFlow)
+
+<img src="assets/img/product_pics/unit/unit_example/TOF/example_unit_tof_01.webp">
+
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/tof-sensor-unit';
diff --git a/docs/en/unit/trace.md b/docs/en/unit/trace.md
index 581d1951..70d27640 100644
--- a/docs/en/unit/trace.md
+++ b/docs/en/unit/trace.md
@@ -46,21 +46,6 @@ This Unit communicates with the M5Core via GROVE PORTA I2C(0x5A).
 
 ?>3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)[Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
 
-## Example
-
-### 1. Arduino IDE
-
-The code below is incomplete. To get complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/TRACE)
-
-
-<img src="assets/img/product_pics/unit/unit_trace_04.webp">
-
-### 2. UIFlow
-
-To get complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/TRACE/UIFlow)
-
-<img src="assets/img/product_pics/unit/unit_example/TRACE/example_unit_trace_01.webp">
-
 ## Schematic
 
 <img src="assets/img/product_pics/unit/trace_sch.webp">
@@ -76,6 +61,21 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
 
 <img src="assets\img\product_pics\app\mega328_isp.webp" width="30%" height="30%">
 
+## Example
+
+### 1. Arduino IDE
+
+The code below is incomplete. To get complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/TRACE)
+
+
+<img src="assets/img/product_pics/unit/unit_trace_04.webp">
+
+### 2. UIFlow
+
+To get complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/TRACE/UIFlow)
+
+<img src="assets/img/product_pics/unit/unit_example/TRACE/example_unit_trace_01.webp">
+
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/m5stack-trace-board-for-lidar-bot';
diff --git a/docs/en/unit/weight.md b/docs/en/unit/weight.md
index 8e203e78..02e94e8a 100644
--- a/docs/en/unit/weight.md
+++ b/docs/en/unit/weight.md
@@ -70,20 +70,6 @@ power supply regulator:
 
 ?>3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)[Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
 
-## Example
-
-### 1. Arduino IDE
-
-We used a pressure sensor(10kg) in this experiment. (Unit: gram)
-
-To get complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/WEIGHT_HX711)
-
-### 2. UIFlow
-
-To get complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/WEIGHT/UIFlow)
-
-<img src="assets/img/product_pics/unit/unit_example/WEIGHT/example_unit_weight_01.webp">
-
 ## Schematic
 
 <img src="assets/img/product_pics/unit/weight_sch.webp">
@@ -111,6 +97,20 @@ To get complete code, please click [here](https://github.com/m5stack/M5-ProductE
  <tr><td>WEIGHT Unit</td><td>DATA Pin (DAT)</td><td>CLOCK Pin (CLK)</td><td>5V</td><td>GND</td></tr>
 </table>
 
+## Example
+
+### 1. Arduino IDE
+
+We used a pressure sensor(10kg) in this experiment. (Unit: gram)
+
+To get complete code, please click [here](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/WEIGHT_HX711)
+
+### 2. UIFlow
+
+To get complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/WEIGHT/UIFlow)
+
+<img src="assets/img/product_pics/unit/unit_example/WEIGHT/example_unit_weight_01.webp">
+
 <script>
 
    var purchase_link = 'https://m5stack.com/collections/m5-unit/products/weight-sensor-unit';
diff --git a/docs/index.md b/docs/index.md
index 568b500d..a60ff56f 100644
--- a/docs/index.md
+++ b/docs/index.md
@@ -70,7 +70,7 @@
       {a:"/#/en/base/plc_base", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/plc_m12_01.webp", p:"PLC-M12", sku:"K011-B" ,kw:"RS485"},
       {a:"/#/en/base/core_bottom", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_core_bottom_01.webp", p:"Core BOTTOM", sku:"C001-C" ,kw:"BATTERY PIN"},
       {a:"#/en/base/m5go_bottom", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_m5go_base.webp", p:"M5GO BOTTOM", sku:"A014" ,kw:"BATTERY LEGO"},
-      {a:"/#/en/base/m5go_rfid", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_m5go_rfid_01.webp", p:"M5GO RFID", sku:"A014-B" ,kw:"BATTERY RC552"},
+      // {a:"/#/en/base/m5go_rfid", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_m5go_rfid_01.webp", p:"M5GO RFID", sku:"A014-B" ,kw:"BATTERY RC552"},
       {a:"/#/en/base/m5go_charger", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_m5go_base_01.webp", p:"M5GO CHARGER", sku:"A016" ,kw:"LEGO CHARGE"},
       {a:"/#/en/base/base15", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_base15_01.webp", p:"BASE15", sku:"K025" ,kw:"PROTOTYPE"},
       {a:"/#/en/base/base26", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_base26_01.webp", p:"BASE26", sku:"K026" ,kw:"PROTOTYPE"},
diff --git a/docs/zh_CN/README.md b/docs/zh_CN/README.md
index 48e33eda..7fc4d3b0 100644
--- a/docs/zh_CN/README.md
+++ b/docs/zh_CN/README.md
@@ -72,7 +72,7 @@
       {a:"/#/zh_CN/base/plc_base", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/plc_m12_01.webp", p:"PLC-M12", sku:"K011-B" ,kw:"RS485"},
       {a:"/#/zh_CN/base/core_bottom", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_core_bottom_01.webp", p:"Core BOTTOM", sku:"C001-C" ,kw:"BATTERY PIN"},
       {a:"#/zh_CN/base/m5go_bottom", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_m5go_base.webp", p:"M5GO BOTTOM", sku:"A014" ,kw:"BATTERY LEGO"},
-      {a:"/#/zh_CN/base/m5go_rfid", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_m5go_rfid_01.webp", p:"M5GO RFID", sku:"A014-B" ,kw:"BATTERY RC552"},
+      // {a:"/#/zh_CN/base/m5go_rfid", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_m5go_rfid_01.webp", p:"M5GO RFID", sku:"A014-B" ,kw:"BATTERY RC552"},
       {a:"/#/zh_CN/base/m5go_charger", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_m5go_base_01.webp", p:"M5GO CHARGER", sku:"A016" ,kw:"LEGO CHARGE"},
       {a:"/#/zh_CN/base/base15", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_base15_01.webp", p:"BASE15", sku:"K025" ,kw:"PROTOTYPE"},
       {a:"/#/zh_CN/base/base26", img:"https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/m5-docs_homepage/base/base_base26_01.webp", p:"BASE26", sku:"K026"  ,kw:"PROTOTYPE"},
diff --git a/docs/zh_CN/app/m5scale_diy_kit.md b/docs/zh_CN/app/m5scale_diy_kit.md
index 4adbc508..d55ed9ae 100644
--- a/docs/zh_CN/app/m5scale_diy_kit.md
+++ b/docs/zh_CN/app/m5scale_diy_kit.md
@@ -54,7 +54,7 @@
 
 <img src="https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/EasyLoader_logo.webp" width="100px" style="margin-top:20px">
 
-<a href="https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/Application/M5SCALE_DIY_KIT/EasyLoader_APP_M5Scale_diy_kit.exe"><button type="button" class="btn btn-primary">点击下载EasyLoader</button></a>
+<a href="https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/Windows/APPLICATION/EasyLoader_M5SCALE_APPLICATION.exe"><button type="button" class="btn btn-primary">点击下载EasyLoader</button></a>
 
 >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序.
 
diff --git a/docs/zh_CN/core/m5stickc_plus.md b/docs/zh_CN/core/m5stickc_plus.md
new file mode 100644
index 00000000..fe57a158
--- /dev/null
+++ b/docs/zh_CN/core/m5stickc_plus.md
@@ -0,0 +1,313 @@
+# M5StickC PLUS {docsify-ignore-all}
+
+<div class="badge badge-pill badge-primary product_sku_tag">SKU:K016-C</div>
+
+<div class="product_pic"><img src="assets/img/product_pics/core/minicore/m5stickc_plus/m5stickc_plus_01.webp"></div>
+
+## 描述
+
+**M5StickC PLUS** 是[M5StickC](#/zh_CN/core/m5stickc.md)的升级产品，在保留原有功能设计基础上加入了蜂鸣器，同时将屏幕升级到1.14寸、135*240分辨率的TFT屏幕，相较之前增加18.7%的显示内容，电池容量达到120mAh，其他硬件配置与M5StickC相同，同样支持HAT与Unit系列产品.
+
+**开关机操作：**
+
+* 开机：按复位按键，持续至少 2 秒
+
+* 关机：按复位按键，持续至少 6 秒
+
+**注意：**
+
+* M5StickC 支持的波特率: 1200 ~115200, 250K, 500K, 750K, 1500K
+
+* 外壳颜色只有橙色在售
+
+**注意：** 
+
+M5StickC仅支持WIN10&Linux&MAC免驱，其余操作系统则需要用户自行安装驱动程序.
+
+安装步骤：1，点击下方链接，下载驱动安装包. 2.连接设备，并打开电脑设备管理器端口选项。 3，右键点击未能识别的设备，进行手动更新. 
+
+<a href="https://www.ftdichip.com/Drivers/VCP.htm">驱动下载连接</a>
+
+## 产品特性
+
+- 基于 ESP32开发
+- 内置3轴加速计与3轴陀螺仪
+- 内置Red LED
+- 集成红外发射管
+- 内置RTC
+- 集成麦克风
+- 用户按键, LCD(0.96 寸), 电源/复位按键
+- 95 mAh 锂电池
+- 拓展接口
+- 可穿戴 & 可固定
+- 开发平台 [UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/), [Arduino](http://www.arduino.cc)
+
+## 包含
+
+-  1x M5StickC
+-  1x Type-C USB(20cm)
+
+## 应用
+
+- 可穿戴设备
+- 物联网控制器
+- STEM教育
+- DIY作品
+- 智能家居设备
+
+## 规格参数
+
+<table>
+   <tr style="font-weight:bold">
+      <td>主控资源</td>
+      <td>参数</td>
+   </tr>
+   <tr>
+      <td>ESP32</td>
+      <td>240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth</td>
+   </tr>
+   <tr>
+      <td>Flash闪存</td>
+      <td>4MB Flash</td>
+   </tr>
+   <tr>
+      <td>输入电压</td>
+      <td>5V @ 500mA</td>
+   </tr>
+   <tr>
+      <td>接口</td>
+      <td>TypeC x 1, GROVE(I2C+I/0+UART) x 1</td>
+   </tr>
+   <tr>
+      <td>LCD屏幕</td>
+      <td>0.96 inch, 80*160 Colorful TFT LCD, ST7735S</td>
+   </tr>
+   <tr>
+      <td>麦克风</td>
+      <td>SPM1423</td>
+   </tr>
+   <tr>
+      <td>按键</td>
+      <td>自定义按键 x 2</td>
+   </tr>
+   <tr>
+      <td>LED</td>
+      <td>红色 LED x 1</td>
+   </tr>
+   <tr>
+      <td>RTC</td>
+      <td>BM8563</td>
+   </tr>   
+   <tr>
+      <td>PMU</td>
+      <td>AXP192</td>
+   </tr>   
+   <tr>
+      <td>IR</td>
+      <td>Infrared transmission</td>
+   </tr>
+   <tr>
+      <td>MEMS</td>
+      <td>MPU6886</td>
+   </tr>
+   <tr>
+      <td>天线</td>
+      <td>2.4G 3D天线</td>
+   </tr>
+   <tr>
+      <td>PIN接口</td>
+      <td>G0, G26, G36</td>
+   </tr>
+   <tr>
+      <td>电池</td>
+      <td>95 mAh @ 3.7V, inside  vb</td>
+   </tr>
+   <tr>
+      <td>工作温度</td>
+      <td>32°F to 104°F ( 0°C to 40°C )</td>
+   </tr>
+   <tr>
+      <td>尺寸</td>
+      <td>48.2 x 25.5 x 13.7mm</td>
+   </tr>
+   <tr>
+      <td>重量</td>
+      <td>15.1g</td>
+   </tr>
+   <tr>
+      <td>外壳材质</td>
+      <td>Plastic ( PC )</td>
+   </tr>
+</table>
+
+
+## EasyLoader
+
+>EasyLoader是一个简洁快速的程序烧录器，其内置了一个产品相关的案例程序，通过简单步骤将其烧录至主控，即可进行一系列的功能验证.**(程序烧录前，请根据设备类型安装相应驱动程序. M5Core型主机[请点击此处查看CP210X驱动安装教程](zh_CN/arduino/arduino_development?id=安装串口驱动)，M5StickC/V/T/ATOM系列可免驱动使用)**
+
+<div class="easyloader-box">
+    <div style="background-color:white;">
+        <div><img src="https://m5stack.oss-cn-shenzhen.aliyuncs.com/image/easyloader_intro.webp"></div>
+        <div class="easyloader-btn">
+            <a href="https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/Windows/CORE/EasyLoader_M5StickC_FactoryTest.exe">Windows</a>
+            <a href="https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/MacOS/CORE/EasyLoader_M5StickC_FactoryTest.dmg">MacOS</a>
+            <!-- <a>Linux</a>
+            <a>MacOS</a> -->
+        </div>
+    </div>
+    <div>
+        <video id="example_video" controls>
+            <source src="https://m5stack.oss-cn-shenzhen.aliyuncs.com/video/Product_example_video/Core/M5StickC.mp4" type="video/mp4">
+        </video>
+        <div class="easyloader-mask">
+        <a>
+            <svg id="play-btn" t="1583228776634" class="icon" viewBox="0 0 1024 1024" version="1.1" xmlns="http://www.w3.org/2000/svg" p-id="4152" width="75" height="75"><path d="M512 0C229.216 0 0 229.216 0 512s229.216 512 512 512 512-229.216 512-512S794.784 0 512 0z m0 928C282.24 928 96 741.76 96 512S282.24 96 512 96s416 186.24 416 416-186.24 416-416 416zM384 288l384 224-384 224z" p-id="4153" fill="#007aff"></path></svg></a>
+            <p>案例描述:</p>
+            <p>加速计，麦克风，LED，IR，RTC，蓝牙等硬件测试，单击A键或B键可切换测试项.</p>
+        </div>
+    </div>
+</div>
+
+
+## 管脚映射
+
+<img src="assets/img/product_pics/core/minicore/m5stickc/m5stickc_04.webp" width="300px">
+
+**电源结构框图**
+
+<img src="assets/img/product_pics/core/minicore/m5stickc/m5stickc_05.webp" width="300px">
+
+**红色 LED & 红外发射管 IR & 按键 BUTTON A & 按键 BUTTON B**
+
+<table>
+ <tr><td>ESP32 芯片</td><td>GPIO10</td><td>GPIO9</td><td>GPIO37</td><td>GPIO39</td></tr>
+ <tr><td>红色 LED</td><td>LED 管脚</td><td> </td><td> </td><td> </td></tr>
+ <tr><td>红外发射管 IR</td><td> </td><td>发射管引脚</td><td> </td><td> </td></tr>
+<tr><td>按键 BUTTON A</td><td> </td><td> </td><td>按键管脚</td><td> </td></tr>
+<tr><td>按键 BUTTON B</td><td> </td><td> </td><td> </td><td>按键管脚</td></tr>
+</table>
+
+**彩色TFT屏幕** 
+
+驱动芯片：ST7735S
+
+分辨率：80 * 160
+
+<table>
+ <tr><td>ESP32 芯片</td><td>GPIO15</td><td>GPIO13</td><td>GPIO23</td><td>GPIO18</td><td>GPIO5</td></tr>
+ <tr><td>TFT 屏幕</td><td>TFT_MOSI</td><td>TFT_CLK</td><td>TFT_DC</td><td>TFT_RST</td><td>TFT_CS</td></tr>
+</table>
+
+**GROVE 接口**
+
+<table>
+ <tr><td>ESP32 芯片</td><td>GPIO33</td><td>GPIO32</td><td>5V</td><td>GND</td></tr>
+ <tr><td>GROVE 接口</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
+</table>
+
+**麦克风 MIC (SPM1423)**
+
+<table>
+ <tr><td>ESP32 芯片</td><td>GPIO0</td><td>GPIO34</td></tr>
+ <tr><td>麦克风 MIC</td><td>SCL</td><td>SDA</td></tr>
+</table>
+
+**六轴IMU (SH200Q/MPU6886) & 电源管理芯片 (AXP192)**
+
+<table>
+ <tr><td>ESP32 芯片</td><td>GPIO22</td><td>GPIO21</td>
+ <tr><td>六轴姿态传感器</td><td>SCL</td><td>SDA</td>
+ <tr><td>电源管理芯片</td><td>SCL</td><td>SDA</td>
+</table>
+
+**电源管理芯片 (AXP192)**
+
+<table>
+ <tr><td>Microphone</td><td>RTC</td><td>TFT backlight</td><td>TFT IC</td><td>ESP32/3.3V MPU6886/SH200Q</td><td>5V GROVE</td>
+ <tr><td>LDOio0</td><td>LDO1</td><td>LDO2</td><td>LDO3</td><td>DC-DC1</td><td>IPSOUT</td>
+</table>
+
+## 原理图
+
+<img src="https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/M5StickC/m5stickC.webp">
+
+- [原理图](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/M5StickC/20191118__StickC_A04_3110_Schematic_Rebuild_PinMap.pdf)
+
+## 相关链接
+
+-  **Datasheet**
+
+    - [ESP32-PICO](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/esp32-pico-d4_datasheet_cn.pdf)
+    - [ST7735S](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/ST7735S_v1.1_en.pdf)
+    - [BM8563](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/BM8563_V1.1_cn.pdf)
+    - [MPU6886](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/MPU-6886-000193%2Bv1.1_GHIC_en.pdf)
+    - [SH200Q](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/SH200Q_en.pdf)
+    - [AXP192](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/AXP192_datasheet_cn.pdf)
+    - [SPM1423](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/SPM1423HM4H-B_datasheet_en.pdf)
+
+## 结构设计文件
+
+>[点击此处，获取M5StickC开源结构设计文件](https://github.com/m5stack/m5-structural-design-file/tree/master/M5StickC)
+
+## 版本变更
+
+<div class="table-wrapper">
+    <table class="fl-table">
+        <thead>
+        <tr>
+            <th>上市日期</th>
+            <th>产品变动</th>
+            <th>备注:</th>
+        </tr>
+        </thead>      
+        <tbody>
+        <tr>
+            <td>2019.3</td>
+            <td>首次发售</td>
+            <td>/</td>
+        </tr>
+        <tr>
+            <td>2019.8</td>
+            <td>SH200Q变更为MPU6886</td>
+            <td>/</td>
+        </tr>
+        <tr>
+            <td>2019.10</td>
+            <td>升级底部,添加铜螺母</td>
+            <td>/</td>
+        </tr>
+        <tr>
+            <td>2020.3</td>
+            <td>电池容量80mAh变更为95mAh</td>
+            <td>/</td>
+        </tr>
+        <tbody>
+    </table>
+</div>
+
+## 案例程序
+
+### ArduinoIDE
+
+- [M5StickC 出厂测试例程](https://github.com/m5stack/M5StickC/tree/master/examples/Basics/FactoryTest)
+
+- [M5StickC 自动贩卖机](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/App/M5StickC_Slot)
+
+## 相关视频
+
+- **M5StickC 的案例 - 自动贩卖机**
+
+<video width="500" height="315" controls>
+    <source src="https://m5stack.oss-cn-shenzhen.aliyuncs.com/video/Blog/Twitch201904/M5StickC%20Slot%20machine%20demo.mp4" type="video/mp4">
+</video>
+
+<script>
+
+   var purchase_link = 'https://m5stack.com/collections/m5-core/products/stick-c';
+
+   var quickstart_link = 'https://docs.m5stack.com/#/zh_CN/quick_start/m5stickc/m5stickc_quick_start';
+
+   anchor_search(purchase_link,quickstart_link);
+   scrollFunc();
+
+</script>
\ No newline at end of file
diff --git a/docs/zh_CN/hat/hat-env.md b/docs/zh_CN/hat/hat-env.md
index f353a46f..2d2258b2 100644
--- a/docs/zh_CN/hat/hat-env.md
+++ b/docs/zh_CN/hat/hat-env.md
@@ -73,6 +73,13 @@
     </div>
 </div>
 
+### 管脚映射
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>3.3V</td><td>GND</td></tr>
+ <tr><td>HAT ENV</td><td>SDA</td><td>SCL</td><td>3.3V</td><td>GND</td></tr>
+</table>
+
 ## 案例程序
 
 - **UIFlow**
@@ -85,12 +92,7 @@
 
 [点击此处](https://github.com/m5stack/M5StickC/tree/master/examples/Hat/ENV)，获取完整程序.
 
-### 管脚映射
 
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>3.3V</td><td>GND</td></tr>
- <tr><td>HAT ENV</td><td>SDA</td><td>SCL</td><td>3.3V</td><td>GND</td></tr>
-</table>
 
 <script>
 
diff --git a/docs/zh_CN/hat/hat-powerc.md b/docs/zh_CN/hat/hat-powerc.md
index e18c6b8f..4120e4fa 100644
--- a/docs/zh_CN/hat/hat-powerc.md
+++ b/docs/zh_CN/hat/hat-powerc.md
@@ -34,6 +34,14 @@
 - **[IP5209 Datasheet](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/IP5209.pdf)**
 - **[IP3005 Datasheet](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/IP3005-INJOINIC.pdf)**
 
+## 引脚映射
+
+<table>
+ <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
+ <tr><td>PowerC</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
+<tr><td>PortA</td><td>YELLO</td><td>WHITE</td><td>RED</td><td>BLACK</td></tr>
+</table>
+
 ## 案例程序
 
 - **UIFlow**
@@ -73,14 +81,6 @@ UIFlow代码点击这里[下载](https://github.com/m5stack/M5-ProductExampleCod
     </div>
 </div>
 
-## 引脚映射
-
-<table>
- <tr><td>M5StickC</td><td>GPIO0</td><td>GPIO26</td><td>5V</td><td>GND</td></tr>
- <tr><td>PowerC</td><td>SDA</td><td>SCL</td><td>5V</td><td>GND</td></tr>
-<tr><td>PortA</td><td>YELLO</td><td>WHITE</td><td>RED</td><td>BLACK</td></tr>
-</table>
-
 <script>
 
    var purchase_link = 'https://m5stack.com/products/m5stickc-powerc';