You've already forked MicroPythonOS
mirror of
https://github.com/m5stack/MicroPythonOS.git
synced 2026-05-20 11:51:27 -07:00
Thomas Farstrike
121 lines
3.1 KiB
Python
121 lines
3.1 KiB
Python
print("boot.py: version 0.0.3 running")
|
|
|
|
from machine import Pin, SPI
|
|
import st7789
|
|
import lcd_bus
|
|
import machine
|
|
import cst816s
|
|
import i2c
|
|
|
|
import lvgl as lv
|
|
import task_handler
|
|
|
|
# Pin configuration
|
|
SPI_BUS = 2
|
|
SPI_FREQ = 40000000
|
|
LCD_SCLK = 39
|
|
LCD_MOSI = 38
|
|
LCD_MISO = 40
|
|
LCD_DC = 42
|
|
LCD_CS = 45
|
|
LCD_BL = 1
|
|
|
|
I2C_BUS = 0
|
|
I2C_FREQ = 100000
|
|
TP_SDA = 48
|
|
TP_SCL = 47
|
|
TP_ADDR = 0x15
|
|
TP_REGBITS = 8
|
|
|
|
TFT_HOR_RES=320
|
|
TFT_VER_RES=240
|
|
|
|
spi_bus = machine.SPI.Bus(
|
|
host=SPI_BUS,
|
|
mosi=LCD_MOSI,
|
|
miso=LCD_MISO,
|
|
sck=LCD_SCLK
|
|
)
|
|
display_bus = lcd_bus.SPIBus(
|
|
spi_bus=spi_bus,
|
|
freq=SPI_FREQ,
|
|
dc=LCD_DC,
|
|
cs=LCD_CS,
|
|
)
|
|
display = st7789.ST7789(
|
|
data_bus=display_bus,
|
|
display_width=TFT_VER_RES,
|
|
display_height=TFT_HOR_RES,
|
|
backlight_pin=LCD_BL,
|
|
backlight_on_state=st7789.STATE_PWM,
|
|
color_space=lv.COLOR_FORMAT.RGB565,
|
|
color_byte_order=st7789.BYTE_ORDER_BGR,
|
|
rgb565_byte_swap=True,
|
|
)
|
|
display.init()
|
|
display.set_power(True)
|
|
display.set_backlight(100)
|
|
|
|
# Touch handling:
|
|
i2c_bus = i2c.I2C.Bus(host=I2C_BUS, scl=TP_SCL, sda=TP_SDA, freq=I2C_FREQ, use_locks=False)
|
|
touch_dev = i2c.I2C.Device(bus=i2c_bus, dev_id=TP_ADDR, reg_bits=TP_REGBITS)
|
|
indev=cst816s.CST816S(touch_dev,startup_rotation=lv.DISPLAY_ROTATION._180) # button in top left, good
|
|
|
|
lv.init()
|
|
display.set_rotation(lv.DISPLAY_ROTATION._90)
|
|
|
|
# Gesture IDs:
|
|
# 0: press
|
|
# 1: swipe from left to USB port
|
|
# 2: swipe from USB port to left
|
|
# 3: top to bottom
|
|
# 4: bottom to top
|
|
# 5: release
|
|
# 12: long press
|
|
|
|
start_y = None # Variable to store the starting Y-coordinate of a touch
|
|
def handle_gesture(pin):
|
|
global start_y # Access the global start_y variable
|
|
indev._read_reg(0x01)
|
|
gesture_id = indev._rx_buf[0]
|
|
indev._read_reg(0x02)
|
|
finger_num = indev._rx_buf[0]
|
|
indev._read_reg(0x03)
|
|
x_h = indev._rx_buf[0]
|
|
indev._read_reg(0x04)
|
|
x_l = indev._rx_buf[0]
|
|
x = ((x_h & 0x0F) << 8) | x_l
|
|
indev._read_reg(0x05)
|
|
y_h = indev._rx_buf[0]
|
|
indev._read_reg(0x06)
|
|
y_l = indev._rx_buf[0]
|
|
y = ((y_h & 0x0F) << 8) | y_l
|
|
#print(f"GestureID={gesture_id},FingerNum={finger_num},X={x},Y={y}")
|
|
temp = y
|
|
y = TFT_VER_RES - x
|
|
#x = TFT_HOR_RES - temp
|
|
x = temp
|
|
#print(f"Corrected GestureID={gesture_id},FingerNum={finger_num},X={x},Y={y}")
|
|
if gesture_id == 0x00 and start_y is None: # Press (touch start)
|
|
# Store the starting Y-coordinate
|
|
start_y = y
|
|
#print(f"Touch started at Y={start_y}")
|
|
elif gesture_id == 0x04 and drawer_open: # Swipe up
|
|
# print("Swipe Up Detected")
|
|
close_drawer()
|
|
start_y = None # Clear start_y after gesture
|
|
elif gesture_id == 0x03: # Swipe down
|
|
if start_y is not None and start_y <= NOTIFICATION_BAR_HEIGHT:
|
|
# print("Swipe Down Detected from Notification Bar")
|
|
open_drawer()
|
|
start_y = None # Clear start_y after gesture
|
|
elif gesture_id == 0x05: # Release
|
|
start_y = None # Clear start_y on release
|
|
|
|
indev._write_reg(0xEC,0x06)
|
|
indev._write_reg(0xFA,0x50)
|
|
irq_pin=machine.Pin(46,machine.Pin.IN,machine.Pin.PULL_UP)
|
|
irq_pin.irq(trigger=machine.Pin.IRQ_FALLING, handler=handle_gesture)
|
|
|
|
print("boot.py finished")
|