diff --git a/internal_filesystem/boot_fri3d2024.py b/internal_filesystem/boot_fri3d2024.py
new file mode 100644
index 00000000..e0ab212d
--- /dev/null
+++ b/internal_filesystem/boot_fri3d2024.py
@@ -0,0 +1,91 @@
+# Hardware initialization for Fri3d Camp 2024 Badge
+
+from machine import Pin, SPI
+import st7789 
+import lcd_bus
+import machine
+import cst816s
+import i2c
+
+import lvgl as lv
+import task_handler
+
+import mpos.ui
+
+# Pin configuration
+SPI_BUS = 2
+#SPI_FREQ = 40000000
+#SPI_BUS = 1
+SPI_FREQ = 20000000
+LCD_SCLK = 7
+LCD_MOSI = 6
+LCD_MISO = 8
+LCD_DC = 4
+LCD_CS = 5
+#LCD_BL = 1
+LCD_RST = 48
+
+#I2C_BUS = 0
+#I2C_FREQ = 100000
+#TP_SDA = 48
+#TP_SCL = 47
+#TP_ADDR = 0x15
+#TP_REGBITS = 8
+
+TFT_HOR_RES=296
+TFT_VER_RES=240
+
+spi_bus = machine.SPI.Bus(
+    host=SPI_BUS,
+    mosi=LCD_MOSI,
+    miso=LCD_MISO,
+    sck=LCD_SCLK
+)
+display_bus = lcd_bus.SPIBus(
+    spi_bus=spi_bus,
+    freq=SPI_FREQ,
+    dc=LCD_DC,
+    cs=LCD_CS
+)
+
+#rs=LCD_RST
+# lv.color_format_get_size(lv.COLOR_FORMAT.RGB565) = 2 bytes per pixel * 320 * 240 px = 153600 bytes
+# The default was /10 so 15360 bytes.
+# /2 = 76800 shows something on display and then hangs the board
+# /2 = 38400 works and pretty high framerate but camera gets ESP_FAIL
+# /2 = 19200 works, including camera at 9FPS
+# 28800 is between the two and still works with camera!
+# 30720 is /5 and is already too much
+#_BUFFER_SIZE = const(28800)
+buffersize = const(28800)
+fb1 = display_bus.allocate_framebuffer(buffersize, lcd_bus.MEMORY_INTERNAL | lcd_bus.MEMORY_DMA)
+fb2 = display_bus.allocate_framebuffer(buffersize, lcd_bus.MEMORY_INTERNAL | lcd_bus.MEMORY_DMA)
+
+STATE_HIGH = 1
+STATE_LOW = 0
+
+# see ./lvgl_micropython/api_drivers/py_api_drivers/frozen/display/display_driver_framework.py
+display = st7789.ST7789(
+    data_bus=display_bus,
+    frame_buffer1=fb1,
+    frame_buffer2=fb2,
+    display_width=TFT_VER_RES,
+    display_height=TFT_HOR_RES,
+    color_space=lv.COLOR_FORMAT.RGB565,
+    color_byte_order=st7789.BYTE_ORDER_BGR,
+    rgb565_byte_swap=True,
+    reset_pin=LCD_RST,
+    reset_state=STATE_LOW
+)
+
+display.init()
+display.set_power(True)
+display.set_backlight(100)
+
+display.set_color_inversion(False)
+
+lv.init()
+display.set_rotation(lv.DISPLAY_ROTATION._270) # must be done after initializing display and creating the touch drivers, to ensure proper handling
+display.set_params(0x36, bytearray([0x28]))
+
+print("boot.py finished")
diff --git a/internal_filesystem/lib/mpos/battery_voltage.py b/internal_filesystem/lib/mpos/battery_voltage.py
index 2412d6b9..1a16f1a2 100644
--- a/internal_filesystem/lib/mpos/battery_voltage.py
+++ b/internal_filesystem/lib/mpos/battery_voltage.py
@@ -2,7 +2,8 @@ have_adc=True
 try:
     from machine import ADC, Pin
     # Configure ADC on pin 5 (IO5 / BAT_ADC)
-    adc = ADC(Pin(5))
+    #adc = ADC(Pin(5)) # TouchColorPiggy
+    adc = ADC(Pin(13)) # fri3d-2024
     # Set ADC to 11dB attenuation for 0–3.3V range (common for ESP32)
     adc.atten(ADC.ATTN_11DB)
 except Exception as e:
@@ -19,6 +20,14 @@ VOLTAGE_DIVIDER = 3  # (R1 + R2) / R2 = (200k + 100k) / 100k = 3
 MIN_VOLTAGE = 3.7
 MAX_VOLTAGE = 4.2
 
+# On fri3d-2024, it's 2367 for full
+# Battery voltage ranges from 3.15V (0%) to 4.15 (100%) as datasheet specifies
+# 3.0 +/- 0.1V (discharge cut-off) to 4.2V (no margin of error provided, assuming 0.05V)
+# Charger stops charging at 4.07V (92%) to reduce battery wear.
+#define RG_BATTERY_CALC_PERCENT(raw) (((raw) * 2.f - 3150.f) / (4150.f - 3150.f) * 100.f)
+#define RG_BATTERY_CALC_VOLTAGE(raw) ((raw) * 2.f * 0.001f)
+
+
 # USB connected, full battery: VBAT 4.179 5V: 5.1
 # read_battery_voltage raw_value: 1598.4
 # read_battery_voltage raw_value: 1598.1
@@ -67,7 +76,8 @@ def read_battery_voltage():
     #print(f"read_battery_voltage raw_value: {raw_value}")
     # Convert to voltage, accounting for divider and reference
     #voltage = (raw_value / ADC_MAX) * VREF * VOLTAGE_DIVIDER
-    voltage = raw_value * 262 / 100000
+    #voltage = raw_value * 262 / 100000 # 2inch
+    voltage = raw_value * 2 / 1000 # fri3d-2024
     # Clamp to 0–4.2V range for LiPo battery
     voltage = max(0, min(voltage, MAX_VOLTAGE))
     #return raw_value
diff --git a/internal_filesystem/lib/mpos/ui/topmenu.py b/internal_filesystem/lib/mpos/ui/topmenu.py
index af0958c7..d39e0e14 100644
--- a/internal_filesystem/lib/mpos/ui/topmenu.py
+++ b/internal_filesystem/lib/mpos/ui/topmenu.py
@@ -84,7 +84,7 @@ def create_notification_bar():
     # Time label
     time_label = lv.label(notification_bar)
     time_label.set_text("00:00:00")
-    time_label.align(lv.ALIGN.LEFT_MID, 0, 0)
+    time_label.align(lv.ALIGN.LEFT_MID, mpos.ui.pct_of_display_width(10), 0)
     temp_label = lv.label(notification_bar)
     temp_label.set_text("00°C")
     temp_label.align_to(time_label, lv.ALIGN.OUT_RIGHT_MID, mpos.ui.pct_of_display_width(7)	, 0)
@@ -108,7 +108,7 @@ def create_notification_bar():
     battery_icon = lv.label(notification_bar)
     battery_icon.set_text(lv.SYMBOL.BATTERY_FULL)
     #battery_icon.align_to(battery_label, lv.ALIGN.OUT_LEFT_MID, 0, 0)
-    battery_icon.align(lv.ALIGN.RIGHT_MID, 0, 0)
+    battery_icon.align(lv.ALIGN.RIGHT_MID, -mpos.ui.pct_of_display_width(10), 0)
     battery_icon.add_flag(lv.obj.FLAG.HIDDEN) # keep it hidden until it has a correct value
     # WiFi icon
     wifi_icon = lv.label(notification_bar)
diff --git a/scripts/install.sh b/scripts/install.sh
index 8d3b45df..f245614a 100755
--- a/scripts/install.sh
+++ b/scripts/install.sh
@@ -39,7 +39,8 @@ if [ ! -z "$appname" ]; then
 fi
 
 
-$mpremote fs cp boot.py :/boot.py
+#$mpremote fs cp boot.py :/boot.py
+$mpremote fs cp boot_fri3d2024.py :/boot.py
 $mpremote fs cp main.py :/main.py
 
 #$mpremote fs cp main.py :/system/button.py