exiaFingerprint2 demo 使用教程 / Fingerprint2 Demo User Guide
该demo只适用于M5Stack CoreS3/-SE/-Lite / This demo is only compatible with M5Stack CoreS3/-SE/-Lite
1. 启动后进入主界面 / Main Interface After Startup
左上角：指纹录入 右上角：指纹验证 / Top-left: Fingerprint Enrollment | Top-right: Fingerprint Verification
左下角：模板上传下载 右下角：查看系统寄存器 / Bottom-left: Template Upload/Download | Bottom-right: View System Registers
在主界面长按指纹模块，将自动显示指纹图像 / Long press the fingerprint module on the main interface to automatically display the fingerprint image
2. 录入指纹 / Fingerprint Enrollment
2.1 点击左上角打开指纹录入 / Click the top-left corner to open fingerprint enrollment
2.2 放下手指，第一次 / Place your finger, first time
2.3 然后松开手指（程序可配置为不需要抬起手指） / Then lift your finger (program can be configured to not require lifting)
2.4 再次放下手指 / Place your finger again
2.5 然后再次抬起手指 / Then lift your finger again
2.6 再次放下手指（本程序设置为3次，程序可自定义） / Place your finger again (this program is set to 3 times, customizable)
显示Store ok即为录入成功，程序也通过次判断是否成功。 / Display "Store ok" indicates successful enrollment, the program also judges success through this.
3. 指纹验证 / Fingerprint Verification
3.1 点击右上角，打开指纹验证界面 / Click the top-right corner to open fingerprint verification interface
3.2 放下手指，若失败 / Place your finger, if failed
3.3 若成功，会显示存储的页号和比对分数 / If successful, the stored page number and match score will be displayed
4. 模板上传下载 / Template Upload/Download
点击左下角，进入模板上传下载预览页面 / Click the bottom-left corner to enter the template upload/download preview page
该页面主要演示模板的上传下载的数据包传输过程，具体实现可参考源码。 / This page mainly demonstrates the packet transmission process of template upload and download, please refer to the source code for specific implementation.
5. 模块内部的系统寄存器显示 / Module Internal System Register Display
点击右下角，显示内部的寄存器信息 / Click the bottom-right corner to display internal register information
