Commit Graph

10642 Commits

Author SHA1 Message Date
Glenn Ruben Bakke cf383412ef nrf/flash: Update flash driver to use nrfx_nvmc driver.
The the nrfx driver is aware of chip specific registers, while
the raw HAL abstraction is not. This driver enables use of NVMC
in non-secure domain for nrf9160.
2019-10-02 21:28:34 +02:00
Glenn Ruben Bakke c561ae61a1 nrf/uart: Add support for UARTE (EasyDMA). 2019-10-02 21:20:56 +02:00
Glenn Ruben Bakke 02a8c31eef nrf/temp: Move module configuration guard.
This patch moves the check for MICROPY_PY_MACHINE_TEMP to come
before the inclusion of nrf_temp.h. The nrf_temp.h depends on
the NRF_TEMP_Type which might not be defined for all nRF devices.
2019-10-02 21:15:48 +02:00
Glenn Ruben Bakke d2e730b727 nrf/i2c: Add support for TWIM (EasyDMA). 2019-10-02 20:42:06 +02:00
Damien George 4102320e90 tests/basics: Add test for getting name of func with closed over locals.
Tests correct decoding of the prelude to get the function name.
2019-10-01 12:26:22 +10:00
Damien George 1d0423419b py/bc: Don't include mp_decode_uint funcs when not needed.
These are now only needed when persistent code is disabled.
2019-10-01 12:26:22 +10:00
Damien George fd9b7efe39 minimal/frozentest.mpy: Update due to change in bytecode. 2019-10-01 12:26:22 +10:00
Damien George c8c0fd4ca3 py: Rework and compress second part of bytecode prelude.
This patch compresses the second part of the bytecode prelude which
contains the source file name, function name, source-line-number mapping
and cell closure information.  This part of the prelude now begins with a
single varible length unsigned integer which encodes 2 numbers, being the
byte-size of the following 2 sections in the header: the "source info
section" and the "closure section".  After decoding this variable unsigned
integer it's possible to skip over one or both of these sections very
easily.

This scheme saves about 2 bytes for most functions compared to the original
format: one in the case that there are no closure cells, and one because
padding was eliminated.
2019-10-01 12:26:22 +10:00
Damien George b5ebfadbd6 py: Compress first part of bytecode prelude.
The start of the bytecode prelude contains 6 numbers telling the amount of
stack needed for the Python values and exceptions, and the signature of the
function.  Prior to this patch these numbers were all encoded one after the
other (2x variable unsigned integers, then 4x bytes), but using so many
bytes is unnecessary.

An entropy analysis of around 150,000 bytecode functions from the CPython
standard library showed that the optimal Shannon coding would need about
7.1 bits on average to encode these 6 numbers, compared to the existing 48
bits.

This patch attempts to get close to this optimal value by packing the 6
numbers into a single, varible-length unsigned integer via bit-wise
interleaving.  The interleaving scheme is chosen to minimise the average
number of bytes needed, and at the same time keep the scheme simple enough
so it can be implemented without too much overhead in code size or speed.
The scheme requires about 10.5 bits on average to store the 6 numbers.

As a result most functions which originally took 6 bytes to encode these 6
numbers now need only 1 byte (in 80% of cases).
2019-10-01 12:26:22 +10:00
Damien George 81d04a0200 py: Add n_state to mp_code_state_t struct.
This value is used often enough that it is better to cache it instead of
decode it each time.
2019-10-01 12:26:22 +10:00
Damien George 4c5e1a0368 py/bc: Change mp_code_state_t.exc_sp to exc_sp_idx.
Change from a pointer to an index, to make space in mp_code_state_t.
2019-10-01 12:26:22 +10:00
Damien George 1d7afcce49 py/bc: Remove comments referring to obsolete currently_in_except_block.
It was made obsolete in 6f9e3ff719
2019-10-01 12:26:22 +10:00
Jim Mussared fafa9d35dd stm32/boards/PYBD: Enable BLE for Pyboard D. 2019-10-01 09:51:02 +10:00
Jim Mussared 6f35f214d3 stm32/mpconfigport.h: Add modbluetooth module to stm32. 2019-10-01 09:51:02 +10:00
Andrew Leech eb1b6858a2 extmod/modbluetooth: Allow MP_BLUETOOTH_MAX_ATTR_SIZE in board config. 2019-10-01 09:51:02 +10:00
Andrew Leech 5dc592d117 extmod/modbluetooth_nimble: Use random addr if public isn't available. 2019-10-01 09:51:02 +10:00
Jim Mussared 497dae45e7 extmod/modbluetooth_nimble: Implement modbluetooth API with Nimble. 2019-10-01 09:51:02 +10:00
Jim Mussared 16f8ceeaaa extmod/modbluetooth: Add low-level Python BLE API. 2019-10-01 09:51:02 +10:00
Jim Mussared f67fd95f8d unix/coverage: Add coverage tests for ringbuf. 2019-10-01 09:51:02 +10:00
Jim Mussared 42e9bdf19b py/ringbuf: Add helpers for put16/get16. 2019-10-01 09:51:02 +10:00
Jim Mussared d72dbb822c stm32: Provide port-specific implementation for Nimble on STM32. 2019-10-01 09:51:02 +10:00
Damien George 07f6644a38 extmod/nimble: Add nimble bindings. 2019-10-01 09:51:02 +10:00
Damien George 21507a6f62 lib/mynewt-nimble: Add Apache mynewt nimble as a submodule.
Tag nimble_1_1_0_tag.
2019-10-01 09:51:02 +10:00
Damien George 7418dbf12d drivers/cyw43: Add low-level CYW43xx Bluetooth HCI UART driver. 2019-10-01 09:50:48 +10:00
Andrew Leech 4ba0aff472 stm32/uart: Add RTS/CTS pin configuration support to UART4. 2019-09-27 13:24:01 +10:00