eb239b8398
stmhal/usb: Add support to receive USB HID messages from host.
2016-10-04 15:38:01 +11:00
219245e10f
extmod/machine_i2c: Add support for the addrsize parameter in mem xfers.
...
The memory read/write I2C functions now take an optional keyword-only
parameter that specifies the number of bits in the memory address.
Only mem-addrs that are a multiple of 8-bits are supported (otherwise
the behaviour is undefined).
Due to the integer type used for the address, for values larger than 32
bits, only 32 bits of address will be sent, and the rest will be padded
with 0s. Right now no exception is raised when that happens. For values
smaller than 8, no address is sent. Also no exception then.
Tested with a VL6180 sensor, which has 16-bit register addresses.
Due to code refactoring, this patch reduces stmhal and esp8266 builds
by about 50 bytes.
2016-09-28 14:45:29 +10:00
eeb9d99333
docs/library/machine: Update description of disable/enable IRQ funcs.
2016-09-23 13:15:58 +10:00
4ab3eef8d7
docs/library/pyb.SPI: init(): Describe "bits" argument.
...
Based on https://github.com/micropython/micropython/pull/2210 .
2016-09-18 21:41:21 +03:00
a2391b5a74
Small WiPy doc fixes
2016-09-18 21:38:29 +03:00
3611dcc260
docs: Bump version to 1.8.4.
2016-09-09 14:07:09 +10:00
f3b5480be7
stmhal,cc3200,esp8266: Consistently use PWRON_RESET constant.
...
machine.POWER_ON is renamed to machine.PWRON_RESET to match other
reset-cause constants that all end in _RESET. The cc3200 port keeps a
legacy definition of POWER_ON for backwards compatibility.
2016-09-08 12:50:38 +10:00
dab0f316d2
docs/reference/isr_rules.rst: Two minor additions to docs for using ISR.
...
- Refers to the technique of instantiating an object for use in an ISR by
specifying it as a default argument.
- Footnote detailing the fact that interrupt handlers continue to be
executed at the REPL.
2016-09-07 17:12:42 +10:00
4a9542c0c0
docs/library/machine.WDT: Add that WDT is available on pyboard.
2016-09-06 14:20:52 +10:00
b4df3e74e1
docs/esp8266/quickref: Further improvements for SPI subsections.
...
Consistency and formatting.
2016-09-04 23:31:05 +03:00
20da9064d7
docs/esp8266/quickref: Update information on SPI classes.
...
SPI(1) is not used for hardware SPI. Few more details are provided.
2016-09-04 21:13:55 +03:00
76dcaddc0f
docs/esp8266/quickref: Add internal links to docs for some modules.
2016-08-29 17:40:36 +10:00
efc904c41d
docs/pyboard/quickref: Add section on "delay and timing" for utime mod.
...
And remove reference to deprecated pyb.delay() and pyb.millis().
2016-08-29 17:33:02 +10:00
5c3a2f162e
docs/pyboard/quickref: Add links to pinouts for other pyboard variants.
2016-08-29 17:32:38 +10:00
0f8b1ba8a2
docs/library: Add reference for pyb.usb_mode and pyb.USB_HID.
2016-08-29 15:17:20 +10:00
f2da6467a9
docs/pyboard: Update USB mouse tutorial to use pyb.USB_HID().
2016-08-29 15:16:51 +10:00
57c92d90b0
docs/pyboard: Update USB mouse tutorial to use VCP instead of CDC.
2016-08-29 15:15:25 +10:00
13c5a228c9
docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver.
2016-08-29 12:52:50 +10:00
ed0a06a93f
docs/esp8266/quickref: Fix and update the SPI docs
...
Use the `SPI` factory function in the examples, and use
proper baud rate of 80 000 000.
2016-08-28 23:14:45 +10:00
8e7dfea803
esp8266/modpybhspi: Add a HSPI module for hardware SPI support
...
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
2016-08-19 21:19:59 +03:00
64c5a9435c
docs/library/machine.WDT: Add note that WDT is only available on WiPy.
2016-08-17 14:22:39 +10:00
5e01fb01b3
docs/esp8266/intro: Add command to install esptool.py 1.0.1 via pip.
...
It used a standard BootROM programming algo and may be useful as a
fallback.
2016-08-10 21:40:40 +03:00
2146cdab5e
docs/esp8266/tutorial/pins: Fix typo in commands for pin input mode.
2016-08-09 21:13:27 +03:00
e4e4526954
docs: Bump version to 1.8.3.
2016-08-09 23:49:25 +10:00
5c73de0337
docs/uio: Mention seek()/flush() support for io.BytesIO.
2016-08-09 01:52:56 +03:00
Philip Potter
Radomir Dopieralski
Damien George
Paul Sokolovsky
juhasch
Peter Hinch