9e1b61dedd
py/runtime: Factor out exception raising helpers.
...
Introduce mp_raise_msg(), mp_raise_ValueError(), mp_raise_TypeError()
instead of previous pattern nlr_raise(mp_obj_new_exception_msg(...)).
Save few bytes on each call, which are many.
2016-08-12 21:28:45 +03:00
af9889f99a
stmhal/adc.c: Get ADC working on STM32L4 MCUs.
...
Fixing Issue #2243 . Main problems were:
- HAL_ADC_GetState(adcHandle) may return other bits set (not only
HAL_ADC_STATE_EOC_REG) when called - so I AND-ed it out as proposed by
mattbrejza in Issue #2243 .
- ADC Pin has to be configured as GPIO_MODE_ANALOG_ADC_CONTROL not only
GPIO_MODE_ANALOG.
- Resolved ADC resolution L4 specific (Use L4 define ADC_RESOLUTION_12B).
- Changed setting of Init.EOCSelection toADC_EOC_SINGLE_CONV for L4.
- Added call to ADC_MultiModeTypeDef as this is done on a STM32Cube
generated project too.
- Clean up: Configuration of ADC is done only in ONE function not the same
is done in two functions.
Test is done on PA5 pin of STM32L4Discovery-Kit which is connected to the
DOWN button.
Thanks to mattbrejza for discovering the bug.
2016-08-11 13:01:57 +10:00
dfb8144037
stmhal/boards: Update STM32L476 pin defs to include ADC channels.
...
This patch introduces proper ADC Pin definitions in stm32l476_af.csv.
Originally provided by @tobbad.
2016-08-11 13:01:57 +10:00
4e36dd570b
unix/mpconfigport.h: Don't include stdio.h on MacOS.
...
Fixes build errors such as
"../lib/utils/printf.c:43:5: error: expected parameter declarator"
2016-08-10 21:43:34 +03:00
5e01fb01b3
docs/esp8266/intro: Add command to install esptool.py 1.0.1 via pip.
...
It used a standard BootROM programming algo and may be useful as a
fallback.
2016-08-10 21:40:40 +03:00
72ae3c72c7
tools/mpy-tool.py: Support freezing float literals with obj-repr C.
...
The tool now generates code for freezing floats in obj-repr A, B or C,
with the specific representation detected at compile time using macros.
2016-08-10 13:26:11 +10:00
8a15e0b1c7
esp8266: PULL_UP is not supported on Pin(16), so raise an exception.
2016-08-10 12:45:40 +10:00
b203c1774e
esp8266: Fix reading of pin object for GPIO16.
...
Pin(16) now works as an input.
2016-08-10 12:44:47 +10:00
2146cdab5e
docs/esp8266/tutorial/pins: Fix typo in commands for pin input mode.
2016-08-09 21:13:27 +03:00
e4e4526954
docs: Bump version to 1.8.3.
2016-08-09 23:49:25 +10:00
3c9510d767
esp8266/modules/flashbdev: Start filesystem at 0x90000.
...
To accommodate growing firmware.
2016-08-09 14:59:27 +03:00
3372f69586
esp8266/esp8266.ld: Increase firmware image size to 0x90000 (576K).
...
Of them, 0x87000 is irom0 segment.
This is required to ship increasing number of modules and examples
developed in teh course of ESP8266 port project.
2016-08-09 14:54:26 +03:00
6d11918d49
lib/berkeley-db-1.xx: Update, sets default page size to 4096.
...
This both good default for 4096 and makes less chance to see overflow page
issues.
2016-08-09 02:09:59 +03:00
5c73de0337
docs/uio: Mention seek()/flush() support for io.BytesIO.
2016-08-09 01:52:56 +03:00
3e5534caf7
docs/esp8266/intro: Focus on hazards of unearthed power wrt electronics.
2016-08-07 22:41:34 +03:00
1bc2911174
py/mpconfig.h: Define MP_ALWAYSINLINE for reuse.
...
Similar to existing MP_NOINLINE.
2016-08-07 22:36:05 +03:00
d2cab0b7be
docs/esp8266/tutorial/intro: Add anchor for link from quickeref.
2016-08-07 22:16:40 +03:00
8897dcb2a1
tests/basics: bytes/str.partition/rpartition are now optional.
...
Skip tests if not available.
2016-08-07 22:14:34 +03:00
f84dda7111
docs/esp8266/quickref: Link to installation instructions.
2016-08-07 17:46:27 +03:00
a9923d190e
docs/esp8266/intro: Add troubleshooting section.
...
Tries to summarize most of the issues we've seen so far.
2016-08-07 17:28:33 +03:00
919c54f750
docs/esp8266/intro: Rename to "Getting started" from "Introduction".
...
People tend to skip introductions (everyone knows what esp8266 is, right?),
so try to do A/B testing with a title inviting to read it.
2016-08-07 17:28:23 +03:00
1966745689
esp8266/tutorial/intro: Reword para abou -fm dio switch.
...
Not all NodeMCU boards require it.
2016-08-07 16:31:09 +03:00
31ad1bb606
esp8266/modmachine: Implement dummy sleep() function.
2016-08-07 16:20:01 +03:00
541e76fa45
esp8266/modutime: Actually implement ticks_cpu().
2016-08-07 16:13:51 +03:00
f71f37e426
esp8266/esp_mphal.h: Add mp_hal_ticks_cpu() for reuse.
2016-08-07 16:03:00 +03:00
Paul Sokolovsky
Tobias Badertscher
Damien George
ilovezfs