Commit Graph

11119 Commits

Author SHA1 Message Date
David Lechner 4af79e7694 unix/Makefile: Allow to install all variants of the executable.
The install target is current broken when PROG is used to override the
default executable name.  This fixes it by removing the redundant TARGET
variable and uses PROG directly instead.

The install and uninstall targets are also moved to the common unix
Makefile so that all variants can be installed in the same way.
2020-02-16 23:37:40 +11:00
David Lechner c5f4268c99 unix/variants/standard: Fix role of PREFIX when used to install.
Currently it is not possible to override PREFIX when installing micropython
using the makefile.  It is common practice to be able to run something like
this:

    $ make install PREFIX=/usr DESTDIR=/tmp/staging

This fixes such usage.
2020-02-16 23:35:52 +11:00
Peter Hinch d2f22ea953 drivers/nrf24l01: Change pipe addrs in test to match Arduino addrs.
These addresses were initially chosen to match the nRF24 Arduino library
examples but they are byte-reversed.  So change them to be on-air
compatible with the Arduino library.

Also, the data sheet for the nRF24 says that RX data pipes 1-5 must share
the same top 32-bits, and must differ only in the LSbyte.  The addresses
used here (while correct because they are on TX pipe and RX pipe 0) are
misleading in this sense, because it looks like they were chosen to share
the top 32-bits per the datasheet.
2020-02-16 23:26:34 +11:00
Damien George baf11f237b unix/Makefile: Remove old variant targets that are no longer needed.
To eliminate confusion about what targets to use when building.
2020-02-16 00:15:57 +11:00
Thorsten von Eicken be92aacba3 docs/develop: Detail how to add symbols to mp_fun_table for native mods. 2020-02-16 00:04:25 +11:00
David Lechner f020eac6a8 py/obj.h: Remove TODO idea comment about truncated mp_map_t.
It was suggested to move this to a GitHub issue rather than keep it in the
code, which isn't really sustainable for all ideas.
2020-02-13 13:14:17 +11:00
Damien George ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
Damien George 97eca38c4f py: Add mp_raise_type helper macro and use it where appropriate.
This provides a more consistent C-level API to raise exceptions, ie moving
away from nlr_raise towards mp_raise_XXX.  It also reduces code size by a
small amount on some ports.
2020-02-13 11:03:37 +11:00
Damien George 7679e3be96 py/objmodule.h: Remove obsolete mp_builtin_module_weak_links_map decl.
It was made obsolete in d2384efa80
2020-02-11 15:43:13 +11:00
Damien George 5a755ac30a esp32/modsocket: Convert EADDRINUSE error code from lwip return value. 2020-02-11 13:59:09 +11:00
stijn 5f91933e54 windows: Improve default search path.
The default value for MICROPYPATH used in unix/main.c is
"~/.micropython/lib:/usr/lib/micropython" which has 2 problems when used in
the Windows port:
- it has a ':' as path separator but the port uses ';' so the entire string
  is effectively discarded since it gets interpreted as a single path which
  doesn't exist
- /usr/lib/micropython is not a valid path in a standard Windows
  environment

Override the value with a suitable default.
2020-02-11 13:34:35 +11:00
stijn 8b6e6008c7 unix/main: Use OS-dependent path separator when searching path. 2020-02-11 13:33:56 +11:00
Damien George 580fd636c0 nrf/drivers: Use mp_raise_msg where appropriate, and shorten exc msgs.
If the exception doesn't need printf-style formatting then calling
mp_raise_msg is more efficient.  Also shorten exception messages to match
style in core and other ports.
2020-02-11 11:45:14 +11:00
Damien George 6a3ca96fe5 tests/basics: Add test for equality between tuple and namedtuple. 2020-02-11 11:06:17 +11:00
Damien George 27465e6b24 tests/basics: Add tests for equality between bool and int/float/complex.
False/True should be implicitly converted to 0/1 when compared with numeric
types.
2020-02-11 11:06:17 +11:00
Damien George 9ec1caf42e py: Expand type equality flags to 3 separate ones, fix bool/namedtuple.
Both bool and namedtuple will check against other types for equality; int,
float and complex for bool, and tuple for namedtuple.  So to make them work
after the recent commit 3aab54bf43 they would
need MP_TYPE_FLAG_NEEDS_FULL_EQ_TEST set.  But that makes all bool and
namedtuple equality checks less efficient because mp_obj_equal_not_equal()
could no longer short-cut x==x, and would need to try __ne__.  To improve
this, this commit splits the MP_TYPE_FLAG_NEEDS_FULL_EQ_TEST flags into 3
separate flags to give types more fine-grained control over how their
equality behaves.  These new flags are then used to fix bool and namedtuple
equality.

Fixes issue #5615 and #5620.
2020-02-11 11:06:00 +11:00
Yonatan Goldschmidt 0852acfc74 tests/run-tests: Auto-skip extmod/ticks_diff, extmod/time_ms_us tests. 2020-02-11 10:56:49 +11:00
Peter Hinch 88cbfd791a docs/library: Fix framebuf monochrome 1-bit modes, swapping HLSB/HMSB.
This fix can be demonstrated by the following:

    b = bytearray(32)
    f = framebuf.FrameBuffer(b, 32, 8, framebuf.MONO_HLSB)
    f.pixel(0, 0, 1)
    print('MONO_HLSB', hex(b[0]))

    b = bytearray(32)
    f = framebuf.FrameBuffer(b, 32, 8, framebuf.MONO_HMSB)
    f.pixel(0, 0, 1)
    print('MONO_HMSB', hex(b[0]))

Outcome:

    MONO_HLSB 0x80
    MONO_HMSB 0x1
2020-02-10 23:04:15 +11:00
Damien George ce40abcf21 stm32/usbd_cdc_interface: Remove "interrupt_char != -1" check.
It's not needed.  The C integer implicit promotion rules mean that the
uint8_t of the incoming character is promoted to a (signed) int, matching
the type of interrupt_char.  Thus the uint8_t incoming character can never
be equal to -1 (the value of interrupt_char that indicate that interruption
is disabled).
2020-02-07 16:08:37 +11:00
Damien George 046ae80bdf unix, windows: Use mp_keyboard_interrupt instead of custom code.
The mp_keyboard_interrupt() function does exactly what is needed here, and
using it gets ctrl-C working when MICROPY_ENABLE_SCHEDULER is enabled on
these ports (and MICROPY_ASYNC_KBD_INTR is disabled).
2020-02-07 16:08:33 +11:00
Damien George abe2caf6df py/scheduler: Move clearing of kbd traceback to mp_keyboard_interrupt.
This is a more logical place to clear the KeyboardInterrupt traceback,
right before it is set as a pending exception.  The clearing is also
optimised from a function call to a simple store of NULL.
2020-02-07 16:08:31 +11:00
Damien George f4641b2378 esp32/uart: Use core-provided mp_keyboard_interrupt, placed in IRAM. 2020-02-07 16:08:31 +11:00
Damien George 8d0421c3cf esp8266: Put mp_keyboard_interrupt in IRAM.
It was originally in IRAM due to the linker script specification, but
since the function moved from lib/utils/interrupt_char.c to py/scheduler.c
it needs to be put back in IRAM.
2020-02-07 16:08:31 +11:00
Damien George 8fb5c8fdd5 py/scheduler: Allow a port to specify attrs for mp_keyboard_interrupt.
Functions like mp_keyboard_interrupt() may need to be called from an IRQ
handler and may need to be in a special memory section, so provide a
generic wrapping macro for a port to do this.  The macro name is chosen to
be MICROPY_WRAP_<function name in uppercase> so that (in the future with
more wrappers) each function could potentially be handled separately.
2020-02-07 16:08:29 +11:00
Damien George eaf30c516a tests/unix: Add coverage tests for kbd-intr and scheduler. 2020-02-07 16:08:29 +11:00