David Brownell 844b5eb49d don't require 'openocd.cfg' to start ...

Starting the daemon with with just a bare "openocd" I saw:

	Can't find openocd.cfg

That's not an error; don't treat it as if it were.  There may
be an error later -- like, "no interface set up" -- but let
messages only report real errors, not fake ones.

2010-01-05 13:32:39 -08:00

..

flash

streamline and document helptext mode displays

2010-01-02 15:52:35 -08:00

helper

don't require 'openocd.cfg' to start

2010-01-05 13:32:39 -08:00

jtag

parport: output port as hex rather than dec

2010-01-05 19:54:36 +00:00

pld

build: add build/src to include path

2009-12-08 10:16:10 +01:00

server

gdb: fix regression in gdb_port command

2010-01-05 15:28:23 +01:00

svf

cygwin 1.7 build fixes

2009-12-26 10:19:19 -08:00

target

ARM: add #defines for JTAG ack codes

2010-01-05 13:03:27 -08:00

xsvf

build: add build/src to include path

2009-12-08 10:16:10 +01:00

ecosboard.c

zy1000: add zy1000_ prefix to uart command

2009-12-30 13:13:31 +01:00

hello.c

change #include "log.h" to <helper/log.h>

2009-12-03 04:22:52 -08:00

hello.h

improve command handling examples

2009-11-25 10:29:05 -08:00

main.c

add openocd.h for top-level declarations

2009-11-14 07:29:16 -08:00

Makefile.am

Driver for USB-JTAG, Altera USB-Blaster and compatibles

2009-12-26 15:05:06 -08:00

openocd.c

server: add server_preinit which is called before config file is parsed.

2009-12-11 10:26:15 +00:00

openocd.h

remove #if logic for openocd_sleep_*lude

2009-12-02 13:26:26 -08:00