Bogdan Kolbov afbad69d97 flash/nor/niietcm4: minor fixes ...

niietcm4_write() buffer padding:
add correct buffer padding for 16 bytes.

Args check in FLASH_BANK_COMMAND_HANDLER():
first version of the driver had 7 args, current - 6. This patch will fix
error when flash is rejected (current k1921vk01t.cfg has flash bank init
with 6 args).

Timeouts in flash flag checking procedure:
increase timeouts in niietcm4_opstatus_check() and niietcm4_uopstatus_check()
cause there were problems in some hardware configurations.

JTAG ID:
wrong id in k1921vk01t.cfg replaced with right one.

Signed-off-by: Bogdan Kolbov <kolbov@niiet.ru>
Change-Id: I84296ba3eb4eeda4d4a68b18c94666f1269a500f
Reviewed-on: http://openocd.zylin.com/3171
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2016-01-29 05:41:53 +00:00

..

board

am437x: always use highest possible JTAG clock.

2016-01-22 13:03:39 +00:00

chip

Fix a typo.

2013-07-07 13:00:59 +00:00

cpld

tcl: Support for reading "Device DNA" from Spartan 6 devices.

2015-10-21 09:11:48 +01:00

cpu/arm

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

fpga

tcl/fpga: add config file for Altera EP3C10 FPGA (Cyclone III family)

2015-12-29 21:22:22 +00:00

interface

tcl/interface/ftdi: add 100ask's OpenJTAG config

2015-11-16 16:17:18 +00:00

target

flash/nor/niietcm4: minor fixes

2016-01-29 05:41:53 +00:00

test

TCL scripts: replace "puts" with "echo"

2010-11-09 08:12:51 +01:00

tools

tcl: add TP-LINK TL-MR3020 to the firmware recovery script

2015-02-11 15:30:28 +00:00

bitsbytes.tcl

TCL scripts: replace "puts" with "echo"

2010-11-09 08:12:51 +01:00

mem_helper.tcl

TCL scripts: fix ocd_mem2array/mem2array

2010-09-28 10:44:50 +02:00

memory.tcl

tcl: remove silly ocd_ prefix to array2mem and mem2array

2010-08-11 17:24:55 +02:00

mmr_helpers.tcl

TCL scripts: replace "puts" with "echo"

2010-11-09 08:12:51 +01:00