Esben Haabendal 32b67ee3c9 cfi: support for 16-bit flash with reversed endianness ...

This is for targets where flash controller has reverse endianness
compared to target.  For these, the 'bus_swap' parameter can be given to the
CFI driver, which will cause command CFI commands to be written with
bytes swapped.  This is only for x16 CFI flash.

Change-Id: I698b768e92e65d160232e90b0e81a824e3c81a46
Signed-off-by: Esben Haabendal <esben@haabendal.dk>
Reviewed-on: http://openocd.zylin.com/3041
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2016-02-13 23:09:40 +00:00

..

manual

Some minor URL fixes and typo fixes, no functional changes.

2014-01-11 08:13:53 +00:00

fdl.texi

- update openocd.texi to fdl 1.2

2008-02-29 18:10:46 +00:00

INSTALL.txt

Remove annoying end-of-line whitespace from doc/* files.

2009-09-21 18:52:45 +00:00

Makefile.am

doc: add "manual/" directory in its entirety to dist

2014-03-29 07:55:30 +00:00

openocd.1

docs: update incorrect urls

2013-03-28 23:24:40 +00:00

openocd.texi

cfi: support for 16-bit flash with reversed endianness

2016-02-13 23:09:40 +00:00