Salvador Arroyo 115b7be426 Pic32mx.cfg: Change system clock to 8Mhz after reset-init. ...

As for openocd 0.6.0-rc2 the function mips32_pracc_fastdata_xfer()
should now work at a scan frequency up to 1200Khz.
Mainly usefull to increase programming speed.

Also verify_image should be slightly faster.

Change-Id: I1e9b2be73690a4597e2f6ba069c1205026850f07
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/805
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2012-11-16 12:25:19 +00:00

..

board

Generic LPC1850 board w/ SPIFI flash.

2012-11-06 14:34:16 +00:00

chip

config: fix typo in at91 config

2012-03-06 10:30:54 +00:00

cpld

Add config file for Lattice LC4032ZE CPLD (ispMACH 4000ZE family)

2012-07-17 08:29:32 +00:00

cpu/arm

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

interface

ftdi/flyswatter2.cfg: Define the LED signal

2012-10-28 05:25:17 +00:00

target

Pic32mx.cfg: Change system clock to 8Mhz after reset-init.

2012-11-16 12:25:19 +00:00

test

TCL scripts: replace "puts" with "echo"

2010-11-09 08:12:51 +01:00

bitsbytes.tcl

TCL scripts: replace "puts" with "echo"

2010-11-09 08:12:51 +01:00

mem_helper.tcl

TCL scripts: fix ocd_mem2array/mem2array

2010-09-28 10:44:50 +02:00

memory.tcl

tcl: remove silly ocd_ prefix to array2mem and mem2array

2010-08-11 17:24:55 +02:00

mmr_helpers.tcl

TCL scripts: replace "puts" with "echo"

2010-11-09 08:12:51 +01:00