linuxmsm/openocd
0
0
Fork 0
mirror of https://github.com/linux-msm/openocd.git synced 2026-02-25 13:15:07 -08:00
Code Issues Packages Projects Releases Wiki Activity

Commit Graph

  • 1c1ae777e1 - updated version info in openocd.c drath 2006-08-17 14:56:22 +00:00
  • 5fcd1d704c - renamed jtag_interface_t.support_statemove to jtag_interface_t.support_pathmove (it is used to indicate jtag_add_pathmove support) - fixed small bug in str7x.c that printed an address instead of the target number in an error message - added support for Olimex ARM-USB-OCD. The new ft2232 layout is called "olimex-jtag" drath 2006-08-17 14:53:15 +00:00
  • 9a830747b2 - fixed bug in .cfg files. Thanks to Michael Fischer for noticing this. drath 2006-08-14 15:45:11 +00:00
  • 91f58cccbc - updated configuration examples, installation instructions and README (including list of supported JTAG interfaces) drath 2006-08-14 10:58:12 +00:00
  • 15294929e2 - added support for the Signalyzer USB->JTAG dongle (www.signalyzer.com) drath 2006-08-14 10:02:55 +00:00
  • ec0f06db11 - added support for FreeBSD ppi (parallel port access similar to /dev/parport on linux) (thanks to Darius for this patch) - unified 'ftd2xx' and 'ftdi2232' into a single interface 'ft2232'. The library used to access the hardware is choosen during configure with --enable-ft2232_ftd2xx or --enable-ft2232-libftdi. drath 2006-08-11 17:49:41 +00:00
  • ca1e5ee1f4 - fixed jtag_n[st]rst_delay. time is now miliseconds (as documented), not microseconds drath 2006-08-06 12:14:02 +00:00
  • fbf5bec7f3 - fixed a minor problem with the GDB server that could drop the first packet (non-fatal) - fixed some small memory leaks (thanks to Spencer Oliver) - verify chip- and buswidth of cfi flash configurations - added support for ARM966E based systems (tested only with ST micro STR9, thanks to Spencer Oliver) drath 2006-08-06 11:20:42 +00:00
  • 7d24476146 - allow building for MinGW using either -mno-cygwin or the MinGW gcc - added GiveIO support to the amt_jtagaccel driver - explicitly disable loopback mode for FT2232 devices - changed configuration options n[st]rst_delay to jtag_n[st]rst_delay - shutdown network services on exit drath 2006-08-01 09:45:22 +00:00
  • 1341eb3b0a - added configurable delays after reset lines get deasserted. useful if reset circuitry keeps lines asserted for too long. - additional debug output when opening the parallel port - fixed counting of available arm7/9 watchpoint units - 'flash write' now displays elapsed time drath 2006-07-30 11:25:43 +00:00
  • 82d2633b5f - Added support for native MinGW builds (thanks to Spencer Oliver and Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes drath 2006-07-17 14:13:27 +00:00
  • 1960973baf - fixed bug in Thumb sw breakpoint handling (thanks to Spen for this patch) - fixed handling of services linked list (thanks to Spen for this patch) drath 2006-06-25 21:02:44 +00:00
  • d4d36b0a9a - changed use of bzero (deprecated) to memset (thanks to Spen for pointing this out) - changed fallback implementation of strndup to something that works on all systems (thanks to Spen for this patch) drath 2006-06-25 20:44:25 +00:00
  • db0264db2a - added "version" command (patch from John Hartman, thanks) - fixed bug in telnet history handling (patch from John Hartman, thanks) - OpenOCD version has been changed from SVN revision number to date/time drath 2006-06-25 11:14:44 +00:00
  • ef139a3a5e - added support for AT91SAM7A3 flash (patch from andre renaud, thanks) - fix trunk build for mac os x (patch from Lauri Leukkunen, thanks) - added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x) - fixed bug where endianness of memory accesses could be swapped on BE hosts - added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks) drath 2006-06-23 07:54:01 +00:00
  • 1f76f69999 - keep additional information for decoded instructions drath 2006-06-16 16:19:08 +00:00
  • b9628accd6 - the 'help' command now takes an optional argument to display help only on a certain command (thanks to Andrew Dyer for this enhancement) - OpenOCD now includes the ability to diassemble instructions on its own (only ARM for now, Thumb might follow). The command is "armv4_5 disassemble <address> <count> ['thumb']" (thumb is currently unsupported). I've compared the produced disassembly against GDB/GNU Objdump output, and it seems to be correct, but there may still be some bugs left. drath 2006-06-12 16:49:49 +00:00
  • 335f667d44 - fixed some spelling errors (thanks to Andrew Dyer) drath 2006-06-05 14:36:39 +00:00
  • 8b4e882a16 - prepare OpenOCD for branching, created ./trunk/ drath 2006-06-02 10:36:31 +00:00