Invoke the final function directly in the default finup implementation
since crypto_ahash_final is now just a wrapper around finup.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9d7a0ab1c7 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 698de82278 ("crypto: testmgr - make it easier to enable the
full set of tests") removed support for building kernels that run only
the "fast" set of crypto self-tests by default. This assumed that
nearly everyone actually wanted the full set of tests, *if* they had
already chosen to enable the tests at all.
Unfortunately, it turns out that both Debian and Fedora intentionally
have the crypto self-tests enabled in their production kernels. And for
production kernels we do need to keep the testing time down, which
implies just running the "fast" tests, not the full set of tests.
For Fedora, a reason for enabling the tests in production is that they
are being (mis)used to meet the FIPS 140-3 pre-operational testing
requirement.
However, the other reason for enabling the tests in production, which
applies to both distros, is that they provide some value in protecting
users from buggy drivers. Unfortunately, the crypto/ subsystem has many
buggy and untested drivers for off-CPU hardware accelerators on rare
platforms. These broken drivers get shipped to users, and there have
been multiple examples of the tests preventing these buggy drivers from
being used. So effectively, the tests are being relied on in production
kernels. I think this is kind of crazy (untested drivers should just
not be enabled at all), but that seems to be how things work currently.
Thus, reintroduce a kconfig option that controls the level of testing.
Call it CRYPTO_SELFTESTS_FULL instead of the original name
CRYPTO_MANAGER_EXTRA_TESTS, which was slightly misleading.
Moreover, given the "production kernel" use case, make CRYPTO_SELFTESTS
depend on EXPERT instead of DEBUG_KERNEL.
I also haven't reinstated all the #ifdefs in crypto/testmgr.c. Instead,
just rely on the compiler to optimize out unused code.
Fixes: 40b9969796 ("crypto: testmgr - replace CRYPTO_MANAGER_DISABLE_TESTS with CRYPTO_SELFTESTS")
Fixes: 698de82278 ("crypto: testmgr - make it easier to enable the full set of tests")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HKDF self-tests depend on the HMAC algorithms being registered.
HMAC is now registered at module_init, which put it at the same level as
HKDF. Move HKDF to late_initcall so that it runs afterwards.
Fixes: ef93f15628 ("Revert "crypto: run initcalls for generic implementations earlier"")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull EFI updates from Ard Biesheuvel:
"Not a lot going on in the EFI tree this cycle. The only thing that
stands out is the new support for SBAT metadata, which was a bit
contentious when it was first proposed, because in the initial
incarnation, it would have required us to maintain a revocation index,
and bump it each time a vulnerability affecting UEFI secure boot got
fixed. This was shot down for obvious reasons.
This time, only the changes needed to emit the SBAT section into the
PE/COFF image are being carried upstream, and it is up to the distros
to decide what to put in there when creating and signing the build.
This only has the EFI zboot bits (which the distros will be using for
arm64); the x86 bzImage changes should be arriving next cycle,
presumably via the -tip tree.
Summary:
- Add support for emitting a .sbat section into the EFI zboot image,
so that downstreams can easily include revocation metadata in the
signed EFI images
- Align PE symbolic constant names with other projects
- Bug fix for the efi_test module
- Log the physical address and size of the EFI memory map when
failing to map it
- A kerneldoc fix for the EFI stub code"
* tag 'efi-next-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
include: pe.h: Fix PE definitions
efi/efi_test: Fix missing pending status update in getwakeuptime
efi: zboot specific mechanism for embedding SBAT section
efi/libstub: Describe missing 'out' parameter in efi_load_initrd
efi: Improve logging around memmap init
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
Pull crypto fix from Herbert Xu:
"Fix a buffer overflow regression in shash"
* tag 'v6.16-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: shash - Fix buffer overrun in import function
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
Pull CRC updates from Eric Biggers:
"Cleanups for the kernel's CRC (cyclic redundancy check) code:
- Use __ro_after_init where appropriate
- Remove unnecessary static_key on s390
- Rename some source code files
- Rename the crc32 and crc32c crypto API modules
- Use subsys_initcall instead of arch_initcall
- Restore maintainers for crc_kunit.c
- Fold crc16_byte() into crc16.c
- Add some SPDX license identifiers"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: add SPDX license identifier
lib/crc16: unexport crc16_table and crc16_byte()
w1: ds2406: use crc16() instead of crc16_byte() loop
MAINTAINERS: add crc_kunit.c back to CRC LIBRARY
lib/crc: make arch-optimized code use subsys_initcall
crypto: crc32 - remove "generic" from file and module names
x86/crc: drop "glue" from filenames
sparc/crc: drop "glue" from filenames
s390/crc: drop "glue" from filenames
powerpc/crc: rename crc32-vpmsum_core.S to crc-vpmsum-template.S
powerpc/crc: drop "glue" from filenames
arm64/crc: drop "glue" from filenames
arm/crc: drop "glue" from filenames
s390/crc32: Remove no-op module init and exit functions
s390/crc32: Remove have_vxrs static key
lib/crc: make the CPU feature static keys __ro_after_init
When two crypto algorithm lookups occur at the same time with
different names for the same algorithm, e.g., ctr(aes-generic)
and ctr(aes), they will both be instantiated. However, only one
of them can be registered. The second instantiation will fail
with EEXIST.
Avoid failing the second lookup by making it retry, but only once
because there are tricky names such as gcm_base(ctr(aes),ghash)
that will always fail, despite triggering instantiation and EEXIST.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Fixes: 2825982d9d ("[CRYPTO] api: Added event notification")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Only add ecb to the cipher name if it isn't already ecb.
Also use memcmp instead of strncmp since these strings are all
stored in an array of length CRYPTO_MAX_ALG_NAME.
Fixes: f1c131b454 ("crypto: xts - Convert to skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add ahash support to hmac so that drivers that can't do hmac in
hardware do not have to implement duplicate copies of hmac.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Soon hmac will support ahash. For compatibility hmac still supports
shash so it is possible for two hmac algorithms to be registered at
the same time. The shash algorithm will have the driver name
"hmac-shash(XXX-driver)". Due to a quirk in the API, there is no way
to locate the shash algorithm using the name "hmac(XXX-driver)". It
has to be addressed as either "hmac(XXX)" or "hmac-shash(XXX-driver)".
Looking it up with "hmac(XXX-driver)" will simply trigger the creation
of another instance, and on the second instantiation this will fail
with EEXIST.
Catch the error EEXIST along with ENOENT since it is expected.
If a real shash algorithm came this way, it would be addressed using
the proper name "hmac-shash(XXX-driver)".
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support to crypto_inst_setname for having a driver template
name that differs from the algorithm template name.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add export_import and import_core so that hmac can be used as a
fallback by block-only drivers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The shash desc needs to be zeroed after use in setkey as it is
not finalised (finalisation automatically zeroes it).
Also remove the final function as it's been superseded by finup.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an option to handle the partial blocks in the ahash API.
Almost every hash algorithm has a block size and are only able
to hash partial blocks on finalisation.
As a first step disable virtual address support for algorithms
with state sizes larger than HASH_MAX_STATESIZE. This is OK as
virtual addresses are currently only used on synchronous fallbacks.
This means ahash_do_req_chain only needs to handle synchronous
fallbacks, removing the complexities of saving the request state.
Also move the saved request state into the ahash_request object
as nesting is no longer possible.
Add a scatterlist to ahash_request to store the partial block.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu
Eric Biggers
Linus Torvalds
Jakub Kicinski
Pali Rohár