mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
qcom-laptops
695
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
b85966adbf |
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
||
|
|
0d8c113493 |
Merge tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
||
|
|
ff8747aaca |
Merge tag 'vfs-7.2-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull simple_xattr updates from Christian Brauner: "This reworks the simple xattr api to make it more efficient and easier to use for all consumers. The simple_xattr hash table moves from the inode into a per-superblock cache, removing the per-inode overhead for the common case of few or no xattrs. The interface now passes struct simple_xattrs ** so lazy allocation is handled internally instead of by every caller, kernfs xattr operations on kernfs nodes shared between multiple superblocks are properly serialized, and tmpfs constructs "security.foo" xattr names with kasprintf() instead of kmalloc() plus two memcpy()s. A follow-up fix links kernfs nodes to their parent before the LSM init hook runs: with the per-sb cache kernfs_xattr_set() computes the cache via kernfs_root(kn), which faulted on a freshly allocated node when selinux_kernfs_init_security() called into it - reproducible as a NULL pointer dereference on the first cgroup mkdir on SELinux-enabled systems. On top of this bpffs gains support for trusted.* and security.* xattrs so that user space and BPF LSM programs can attach metadata - for example a content hash or a security label - to pinned objects and directories and inspect it uniformly like on other filesystems. The store is in-memory and non-persistent, living only for the lifetime of the mount like everything else in bpffs" * tag 'vfs-7.2-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: bpf: Add simple xattr support to bpffs kernfs: link kn to its parent before the LSM init hook simpe_xattr: use per-sb cache simple_xattr: change interface to pass struct simple_xattrs ** tmpfs: simplify constructing "security.foo" xattr names kernfs: fix xattr race condition with multiple superblocks |
||
|
|
dad4d4b92a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-7.1-rc8). Conflicts: drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c |
||
|
|
1ee90b77b7 |
net: guard timestamp cmsgs to real error queue skbs
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership.
Fixes:
|
||
|
|
1e7cd8a53b |
simpe_xattr: use per-sb cache
Move the hash table to the super block to remove excessive overhead in case
of small number of xattrs per inode.
Add linked list to the inode, used for listxattr and eviction. Listxattr
uses rcu protection to iterate the list of xattrs.
Before being made per-sb, lazy allocation was protected by inode lock. Now
inode lock no longer provides sufficient exclusion, so use cmpxchg() to
ensure atomicity.
Though I haven't found a description of this pattern, after some research
it seems that cmpxchg_release() and READ_ONCE() should provide the
necessary memory barriers.
Use simple_xattr_free_rcu() in simple_xattrs_free(). This is needed because
the hash table is now shared between inodes and lookup on a different inode
might be running the compare function on the just freed element within the
RCU grace period.
Following stats are based on slabinfo diff, after creating 100k empty
files, then adding a "user.test=foo" xattr to each:
v7.0 (no rhashtable):
File creation: 993.40 bytes/file
Xattr addition: 79.99 bytes/file
v7.1-rc2 (per-inode rhashtable):
File creation: 939.73 bytes/file
Xattr addition: 1296.08 bytes/file
v7.1-rc2 + this patch (per-sb rhashtable)
File creation: 946.84 bytes/file
Xattr addition: 111.86 bytes/file
The overhead of a single xattr is reduced to nearly v7.0 levels. The per
xattr overhead is slightly larger due to the addition of three pointers to
struct simple_xattr.
Fixes:
|
||
|
|
076e5cef28 |
simple_xattr: change interface to pass struct simple_xattrs **
Change the simple_xattr API to accept pointer-to-pointer (struct simple_xattrs **) instead of pointer. This allows the functions to handle lazy allocation internally without requiring callers to use simple_xattrs_lazy_alloc(). The simple_xattr_set(), simple_xattr_set_limited() and simple_xattr_add() functions now handle allocation when xattrs is NULL. simple_xattrs_free() now also frees the xattrs structure itself and sets the pointer to NULL. This simplifies callers and removes the need for most callers to explicitly manage xattrs allocation and lifetime. In shmem_initxattrs(), the total required space for all initial xattrs (ispace) is pre-calculated and deducted from sbinfo->free_ispace. Since this patch modifies the function to add new xattrs directly to the inode's &info->xattrs list rather than using a local temporary variable, a failure means that the partially populated info->xattrs list remains attached to the inode. When the VFS caller handles the -ENOMEM error, it drops the newly created inode via iput(), shmem_free_inode() adds freed to sbinfo->free_ispace a second time, permanently inflating the tmpfs free space quota. Fix by substracting already added xattrs from ispace. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://patch.msgid.link/20260605135322.2632068-4-mszeredi@redhat.com Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> |
||
|
|
fcc77d33a3 |
net: Remove support for AIO on sockets
The only user of msg->msg_iocb was AF_ALG, but that's deprecated. It can be removed entirely at the cost of only supporting synchronous operations. This doesn't break userspace, which will silently block (for a bounded amount of time) in io_submit instead of operating asynchronously. This also makes struct msghdr smaller, helping every other caller of sendmsg(). Signed-off-by: Demi Marie Obenour <demiobenour@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
|
bf53bf3320 |
net: socket: clean up __sys_accept4 comment
Fix a typo and a redundant phrase in the block comment above __sys_accept4(): "thats" -> "that's", and drop the trailing "to recvmsg" that repeats the recvmsg() reference earlier in the same sentence. No functional change. Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com> Link: https://patch.msgid.link/20260516101109.479042-1-avinash.duduskar@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
91a4855d6c |
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
||
|
|
5bd0dec150 |
net: call getsockopt_iter if available
Update do_sock_getsockopt() to use the new getsockopt_iter callback when available. Add do_sock_getsockopt_iter() helper that: 1. Reads optlen from user/kernel space 2. Initializes a sockopt_t with the appropriate iov_iter (kvec for kernel, ubuf for user buffers) and sets opt.optlen 3. Calls the protocol's getsockopt_iter callback 4. Writes opt.optlen back to user/kernel space The optlen is always written back, even on failure. Some protocols (e.g. CAN raw) return -ERANGE and set optlen to the required buffer size so userspace knows how much to allocate. The callback is responsible for setting opt.optlen to indicate the returned data size. Important to say that iov_out does not need to be copied back in do_sock_getsockopt(). When optval is not kernel (the userspace path), sockptr_to_sockopt() sets up opt->iter_out as a ITER_DEST ubuf iterator pointing directly at the userspace buffer (optval.user). So when getsockopt_iter implementations call copy_to_iter(..., &opt->iter_out), the data is written directly to userspace — no intermediate kernel buffer is involved. When optval.is_kernel is true (the in-kernel path, e.g. from io_uring), the kvec points at the already-provided kernel buffer (optval.kernel), so the data lands in the caller's buffer directly via the kvec-backed iterator. In both cases the iterator writes to the final destination in-place at protocol callback. There's nothing to copy back — only optlen needs to be written back. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20260408-getsockopt-v3-2-061bb9cb355d@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
b7d74ea0fd |
Merge tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs i_ino updates from Christian Brauner: "For historical reasons, the inode->i_ino field is an unsigned long, which means that it's 32 bits on 32 bit architectures. This has caused a number of filesystems to implement hacks to hash a 64-bit identifier into a 32-bit field, and deprives us of a universal identifier field for an inode. This changes the inode->i_ino field from an unsigned long to a u64. This shouldn't make any material difference on 64-bit hosts, but 32-bit hosts will see struct inode grow by at least 4 bytes. This could have effects on slabcache sizes and field alignment. The bulk of the changes are to format strings and tracepoints, since the kernel itself doesn't care that much about the i_ino field. The first patch changes some vfs function arguments, so check that one out carefully. With this change, we may be able to shrink some inode structures. For instance, struct nfs_inode has a fileid field that holds the 64-bit inode number. With this set of changes, that field could be eliminated. I'd rather leave that sort of cleanups for later just to keep this simple" * tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group() EVM: add comment describing why ino field is still unsigned long vfs: remove externs from fs.h on functions modified by i_ino widening treewide: fix missed i_ino format specifier conversions ext4: fix signed format specifier in ext4_load_inode trace event treewide: change inode->i_ino from unsigned long to u64 nilfs2: widen trace event i_ino fields to u64 f2fs: widen trace event i_ino fields to u64 ext4: widen trace event i_ino fields to u64 zonefs: widen trace event i_ino fields to u64 hugetlbfs: widen trace event i_ino fields to u64 ext2: widen trace event i_ino fields to u64 cachefiles: widen trace event i_ino fields to u64 vfs: widen trace event i_ino fields to u64 net: change sock.sk_ino and sock_i_ino() to u64 audit: widen ino fields to u64 vfs: widen inode hash/lookup functions to u64 |
||
|
|
c8db08110c |
Merge tag 'vfs-7.1-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner: "This reworks the simple_xattr infrastructure and adds support for user.* extended attributes on sockets. The simple_xattr subsystem currently uses an rbtree protected by a reader-writer spinlock. This series replaces the rbtree with an rhashtable giving O(1) average-case lookup with RCU-based lockless reads. This sped up concurrent access patterns on tmpfs quite a bit and it's an overall easy enough conversion to do and gets rid or rwlock_t. The conversion is done incrementally: a new rhashtable path is added alongside the existing rbtree, consumers are migrated one at a time (shmem, kernfs, pidfs), and then the rbtree code is removed. All three consumers switch from embedded structs to pointer-based lazy allocation so the rhashtable overhead is only paid for inodes that actually use xattrs. With this infrastructure in place the series adds support for user.* xattrs on sockets. Path-based AF_UNIX sockets inherit xattr support from the underlying filesystem (e.g. tmpfs) but sockets in sockfs - that is everything created via socket() including abstract namespace AF_UNIX sockets - had no xattr support at all. The xattr_permission() checks are reworked to allow user.* xattrs on S_IFSOCK inodes. Sockfs sockets get per-inode limits of 128 xattrs and 128KB total value size matching the limits already in use for kernfs. The practical motivation comes from several directions. systemd and GNOME are expanding their use of Varlink as an IPC mechanism. For D-Bus there are tools like dbus-monitor that can observe IPC traffic across the system but this only works because D-Bus has a central broker. For Varlink there is no broker and there is currently no way to identify which sockets speak Varlink. With user.* xattrs on sockets a service can label its socket with the IPC protocol it speaks (e.g., user.varlink=1) and an eBPF program can then selectively capture traffic on those sockets. Enumerating bound sockets via netlink combined with these xattr labels gives a way to discover all Varlink IPC entrypoints for debugging and introspection. Similarly, systemd-journald wants to use xattrs on the /dev/log socket for protocol negotiation to indicate whether RFC 5424 structured syslog is supported or whether only the legacy RFC 3164 format should be used. In containers these labels are particularly useful as high-privilege or more complicated solutions for socket identification aren't available. The series comes with comprehensive selftests covering path-based AF_UNIX sockets, sockfs socket operations, per-inode limit enforcement, and xattr operations across multiple address families (AF_INET, AF_INET6, AF_NETLINK, AF_PACKET)" * tag 'vfs-7.1-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: selftests/xattr: test xattrs on various socket families selftests/xattr: sockfs socket xattr tests selftests/xattr: path-based AF_UNIX socket xattr tests xattr: support extended attributes on sockets xattr,net: support limited amount of extended attributes on sockfs sockets xattr: move user limits for xattrs to generic infra xattr: switch xattr_permission() to switch statement xattr: add xattr_permission_error() xattr: remove rbtree-based simple_xattr infrastructure pidfs: adapt to rhashtable-based simple_xattrs kernfs: adapt to rhashtable-based simple_xattrs with lazy allocation shmem: adapt to rhashtable-based simple_xattrs with lazy allocation xattr: add rhashtable-based simple_xattr infrastructure xattr: add rcu_head and rhash_head to struct simple_xattr |
||
|
|
17edc4e820 |
net: Convert move_addr_to_user() to scoped user access
move_addr_to_user() is a critical functions that was converted to
masked user access by commit
|
||
|
|
0b2600f81c |
treewide: change inode->i_ino from unsigned long to u64
On 32-bit architectures, unsigned long is only 32 bits wide, which causes 64-bit inode numbers to be silently truncated. Several filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that exceed 32 bits, and this truncation can lead to inode number collisions and other subtle bugs on 32-bit systems. Change the type of inode->i_ino from unsigned long to u64 to ensure that inode numbers are always represented as 64-bit values regardless of architecture. Update all format specifiers treewide from %lu/%lx to %llu/%llx to match the new type, along with corresponding local variable types. This is the bulk treewide conversion. Earlier patches in this series handled trace events separately to allow trace field reordering for better struct packing on 32-bit. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org Acked-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
c66e0f453d |
net: use ktime_t in struct scm_timestamping_internal
Instead of using struct timespec64 in scm_timestamping_internal, use ktime_t, saving 24 bytes in kernel stack. This makes tcp_update_recv_tstamps() small enough to be inlined. The ktime_t -> timespec64 conversions happen after socket lock has been released in tcp_recvmsg(), and only if the application requested them. $ scripts/bloat-o-meter -t vmlinux.0 vmlinux add/remove: 0/2 grow/shrink: 5/4 up/down: 146/-277 (-131) Function old new delta tcp_zerocopy_receive 2383 2425 +42 mptcp_recvmsg 1565 1607 +42 tcp_recvmsg_locked 3797 3823 +26 put_cmsg_scm_timestamping64 131 149 +18 put_cmsg_scm_timestamping 131 149 +18 __pfx_tcp_update_recv_tstamps 16 - -16 do_tcp_getsockopt 4024 4006 -18 tcp_recv_timestamp 474 430 -44 tcp_zc_handle_leftover 417 371 -46 __sock_recv_timestamp 1087 1031 -56 tcp_update_recv_tstamps 97 - -97 Total: Before=25223788, After=25223657, chg -0.00% Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://patch.msgid.link/20260304012747.881644-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
b6d6ab1b6d |
xattr,net: support limited amount of extended attributes on sockfs sockets
Now that we've generalized the infrastructure for user.* xattrs make it possible to set up to 128 user.* extended attributes on a sockfs inode or up to 128kib. kernfs (cgroupfs) has the same limits and it has proven to be quite sufficient for nearly all use-cases. This will allow containers to label sockets and will e.g., be used by systemd and Gnome to find various sockets in containers where high-privilege or more complicated solutions aren't available. Link: https://patch.msgid.link/20260216-work-xattr-socket-v1-10-c2efa4f74cb7@kernel.org Acked-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
983512f3a8 |
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes:
|
||
|
|
4b9d25b4d3 |
Merge tag 'vfs-6.19-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner: - Fix a type conversion bug in the ipc subsystem - Fix per-dentry timeout warning in autofs - Drop the fd conversion from sockets - Move assert from iput_not_last() to iput() - Fix reversed check in filesystems_freeze_callback() - Use proper uapi types for new struct delegation definitions * tag 'vfs-6.19-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: vfs: use UAPI types for new struct delegation definition mqueue: correct the type of ro to int Revert "net/socket: convert sock_map_fd() to FD_ADD()" autofs: fix per-dentry timeout warning fs: assert on I_FREEING not being set in iput() and iput_not_last() fs: PM: Fix reverse check in filesystems_freeze_callback() |
||
|
|
afb9917d9b |
Revert "net/socket: convert sock_map_fd() to FD_ADD()"
This reverts commit
|
||
|
|
0abcfd8983 |
Merge tag 'for-6.19/io_uring-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe: - Unify how task_work cancelations are detected, placing it in the task_work running state rather than needing to check the task state - Series cleaning up and moving the cancelation code to where it belongs, in cancel.c - Cleanup of waitid and futex argument handling - Add support for mixed sized SQEs. 6.18 added support for mixed sized CQEs, improving flexibility and efficiency of workloads that need big CQEs. This adds similar support for SQEs, where the occasional need for a 128b SQE doesn't necessitate having all SQEs be 128b in size - Introduce zcrx and SQ/CQ layout queries. The former returns what zcrx features are available. And both return the ring size information to help with allocation size calculation for user provided rings like IORING_SETUP_NO_MMAP and IORING_MEM_REGION_TYPE_USER - Zcrx updates for 6.19. It includes a bunch of small patches, IORING_REGISTER_ZCRX_CTRL and RQ flushing and David's work on sharing zcrx b/w multiple io_uring instances - Series cleaning up ring initializations, notable deduplicating ring size and offset calculations. It also moves most of the checking before doing any allocations, making the code simpler - Add support for getsockname and getpeername, which is mostly a trivial hookup after a bit of refactoring on the networking side - Various fixes and cleanups * tag 'for-6.19/io_uring-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits) io_uring: Introduce getsockname io_uring cmd socket: Split out a getsockname helper for io_uring socket: Unify getsockname and getpeername implementation io_uring/query: drop unused io_handle_query_entry() ctx arg io_uring/kbuf: remove obsolete buf_nr_pages and update comments io_uring/register: use correct location for io_rings_layout io_uring/zcrx: share an ifq between rings io_uring/zcrx: add io_fill_zcrx_offsets() io_uring/zcrx: export zcrx via a file io_uring/zcrx: move io_zcrx_scrub() and dependencies up io_uring/zcrx: count zcrx users io_uring/zcrx: add sync refill queue flushing io_uring/zcrx: introduce IORING_REGISTER_ZCRX_CTRL io_uring/zcrx: elide passing msg flags io_uring/zcrx: use folio_nr_pages() instead of shift operation io_uring/zcrx: convert to use netmem_desc io_uring/query: introduce rings info query io_uring/query: introduce zcrx query io_uring: move cq/sq user offset init around io_uring: pre-calculate scq layout ... |
||
|
|
8f7aa3d3c7 |
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
||
|
|
4667d63872 |
net/socket: convert __sys_accept4_file() to FD_ADD()
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-31-b6efa1706cfd@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
245f0d1c62 |
net/socket: convert sock_map_fd() to FD_ADD()
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-30-b6efa1706cfd@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
d73c167708 |
socket: Split out a getsockname helper for io_uring
Similar to getsockopt, split out a helper to check security and issue the operation from the main handler that can be used by io_uring. Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |