Pull dma-mapping updates from Marek Szyprowski:
- added checks for DMA attributes in the debug code, especially to
ensure that mappings are created and released with matching
attributes (Leon Romanovsky)
- better default configuration for CMA on NUMA machines (Feng Tang)
- code cleanup in dma benchmark tool (Rosen Penev)
* tag 'dma-mapping-7.2-2026-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma: map_benchmark: turn dma_sg_map_param buf into a flexible array
dma-contiguous: simplify numa cma area handling
dma-contiguous: add kconfig option to setup numa cma area if not configured explicitly
dma-debug: Ensure mappings are created and released with matching attributes
dma-debug: Feed DMA attribute for unmapping flows too
dma-debug: Record DMA attributes in debug entry
dma-debug: Remove unused DMA attribute parameter
ntb: Use consistent DMA attributes when freeing DMA mappings
ntb: Store original DMA address for future release
dma_map_resource() uses pfn_valid() to ensure the range is not RAM.
However, pfn_valid() only checks for availability of the memory map for
a PFN but it does not ensure that the PFN is actually backed by RAM. On
ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that
share a section with RAM will falsely trigger the WARN_ON_ONCE and cause
dma_map_resource() to return DMA_MAPPING_ERROR.
This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because
the SPI FIFO register (0xfe204004) falls in the same sparsemem section
as the end of RAM (0xf8000000-0xfbffffff), both in section 31
(0xf8000000-0xffffffff).
Move the sanity check from dma_map_resource() into debug_dma_map_phys()
and replace the unreliable pfn_valid() with pfn_valid() &&
!PageReserved(), which correctly identifies actual usable RAM without
false positives for MMIO regions that happen to have struct pages.
Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check
applies equally to both APIs. Any non-reserved page represents kernel
memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost
certainly wrong and risks breaking coherency on non-coherent platforms.
ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have
PageReserved set, so they will not trigger a false positive.
The check no longer blocks the mapping and uses err_printk() to
integrate with dma-debug filtering.
Fixes: f7326196a7 ("dma-mapping: export new dma_*map_phys() interface")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260513072209.1486986-1-jianpeng.chang.cn@windriver.com
Current CC designs don't place a vIOMMU in front of untrusted devices.
Instead, the DMA API forces all untrusted device DMA through swiotlb
bounce buffers (is_swiotlb_force_bounce()) which copies data into
shared memory on behalf of the device.
When a caller has already arranged for the memory to be shared
via set_memory_decrypted(), the DMA API needs to know so it can map
directly using the unencrypted physical address rather than bounce
buffering. Following the pattern of DMA_ATTR_MMIO, add
DMA_ATTR_CC_SHARED for this purpose. Like the MMIO case, only the
caller knows what kind of memory it has and must inform the DMA API
for it to work correctly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260325192352.437608-2-jiri@resnulli.us
dma-mapping fixes for Linux 7.0
A set of fixes for DMA-mapping subsystem, which resolve false-positive
warnings from KMSAN and DMA-API debug (Shigeru Yoshida and Leon
Romanovsky) as well as a simple build fix (Miguel Ojeda).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Leverage ARCH_HAS_DMA_MAP_DIRECT config option for coherent allocations as
well. This will bypass DMA ops for memory allocations that have been
pre-mapped.
Always set device bus_dma_limit when memory is pre-mapped. In some
architectures, like PowerPC, pmemory can be converted to regular memory via
daxctl command. This will gate the coherent allocations to pre-mapped RAM
only, by dma_coherent_ok().
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251107161105.85999-1-gbatra@linux.ibm.com
Introduce new DMA mapping functions dma_map_phys() and dma_unmap_phys()
that operate directly on physical addresses instead of page+offset
parameters. This provides a more efficient interface for drivers that
already have physical addresses available.
The new functions are implemented as the primary mapping layer, with
the existing dma_map_page_attrs()/dma_map_resource() and
dma_unmap_page_attrs()/dma_unmap_resource() functions converted to simple
wrappers around the phys-based implementations.
In case dma_map_page_attrs(), the struct page is converted to physical
address with help of page_to_phys() function and dma_map_resource()
provides physical address as is together with addition of DMA_ATTR_MMIO
attribute.
The old page-based API is preserved in mapping.c to ensure that existing
code won't be affected by changing EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
variant for dma_*map_phys().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/54cc52af91777906bbe4a386113437ba0bcfba9c.1757423202.git.leonro@nvidia.com
Make dma_map_page_attrs() and dma_map_page_attrs() respect
DMA_ATTR_MMIO.
DMA_ATR_MMIO makes the functions behave the same as
dma_(un)map_resource():
- No swiotlb is possible
- Legacy dma_ops arches use ops->map_resource()
- No kmsan
- No arch_dma_map_phys_direct()
The prior patches have made the internal functions called here
support DMA_ATTR_MMIO.
This is also preparation for turning dma_map_resource() into an inline
calling dma_map_phys(DMA_ATTR_MMIO) to consolidate the flows.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/3660e2c78ea409d6c483a215858fb3af52cd0ed3.1757423202.git.leonro@nvidia.com
Convert the DMA direct mapping functions to accept physical addresses
directly instead of page+offset parameters. The functions were already
operating on physical addresses internally, so this change eliminates
the redundant page-to-physical conversion at the API boundary.
The functions dma_direct_map_page() and dma_direct_unmap_page() are
renamed to dma_direct_map_phys() and dma_direct_unmap_phys() respectively,
with their calling convention changed from (struct page *page,
unsigned long offset) to (phys_addr_t phys).
Architecture-specific functions arch_dma_map_page_direct() and
arch_dma_unmap_page_direct() are similarly renamed to
arch_dma_map_phys_direct() and arch_dma_unmap_phys_direct().
The is_pci_p2pdma_page() checks are replaced with DMA_ATTR_MMIO checks
to allow integration with dma_direct_map_resource and dma_direct_map_phys()
is extended to support MMIO path either.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/bb15a22f76dc2e26683333ff54e789606cfbfcf0.1757423202.git.leonro@nvidia.com
Rename the IOMMU DMA mapping functions to better reflect their actual
calling convention. The functions iommu_dma_map_page() and
iommu_dma_unmap_page() are renamed to iommu_dma_map_phys() and
iommu_dma_unmap_phys() respectively, as they already operate on physical
addresses rather than page structures.
The calling convention changes from accepting (struct page *page,
unsigned long offset) to (phys_addr_t phys), which eliminates the need
for page-to-physical address conversion within the functions. This
renaming prepares for the broader DMA API conversion from page-based
to physical address-based mapping throughout the kernel.
All callers are updated to pass physical addresses directly, including
dma_map_page_attrs(), scatterlist mapping functions, and DMA page
allocation helpers. The change simplifies the code by removing the
page_to_phys() + offset calculation that was previously done inside
the IOMMU functions.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/ed172f95f8f57782beae04f782813366894e98df.1757423202.git.leonro@nvidia.com
Convert the DMA debug infrastructure from page-based to physical address-based
mapping as a preparation to rely on physical address for DMA mapping routines.
The refactoring renames debug_dma_map_page() to debug_dma_map_phys() and
changes its signature to accept a phys_addr_t parameter instead of struct page
and offset. Similarly, debug_dma_unmap_page() becomes debug_dma_unmap_phys().
A new dma_debug_phy type is introduced to distinguish physical address mappings
from other debug entry types. All callers throughout the codebase are updated
to pass physical addresses directly, eliminating the need for page-to-physical
conversion in the debug layer.
This refactoring eliminates the need to convert between page pointers and
physical addresses in the debug layer, making the code more efficient and
consistent with the DMA mapping API's physical address focus.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
[mszyprow: added a fixup]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/56d1a6769b68dfcbf8b26a75a7329aeb8e3c3b6a.1757423202.git.leonro@nvidia.com
Link: https://lore.kernel.org/all/20250910052618.GH341237@unreal/
Pull dma-mapping updates from Marek Szyprowski:
"New two step DMA mapping API, which is is a first step to a long path
to provide alternatives to scatterlist and to remove hacks, abuses and
design mistakes related to scatterlists.
This new approach optimizes some calls to DMA-IOMMU layer and cache
maintenance by batching them, reduces memory usage as it is no need to
store mapped DMA addresses to unmap them, and reduces some function
call overhead. It is a combination effort of many people, lead and
developed by Christoph Hellwig and Leon Romanovsky"
* tag 'dma-mapping-6.16-2025-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
docs: core-api: document the IOVA-based API
dma-mapping: add a dma_need_unmap helper
dma-mapping: Implement link/unlink ranges API
iommu/dma: Factor out a iommu_dma_map_swiotlb helper
dma-mapping: Provide an interface to allow allocate IOVA
iommu: add kernel-doc for iommu_unmap_fast
iommu: generalize the batched sync after map interface
dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
PCI/P2PDMA: Refactor the p2pdma mapping helpers
