The v4l2 helper v4l2_async_register_subdev_sensor() calls
v4l2_async_register_subdev(), which is a macro that expands to
__v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded
inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module
rather than the sensor driver module that originally set sd->owner. When
v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then
overwrites the sensor driver's owner with NULL.
This causes the problem that the sensor module's reference count is never
incremented during async registration, so the module can be removed while
the subdevice is still in use by a notifier (e.g., a CSI-2 receiver
bridge driver).
Fix this by renaming v4l2_async_register_subdev_sensor() to
__v4l2_async_register_subdev_sensor() with an added explicit module
argument and introducing a wrapper macro:
#define v4l2_async_register_subdev_sensor(sd) \
__v4l2_async_register_subdev_sensor(sd, THIS_MODULE)
This ensures the sensor driver module is properly referenced even when
the sensor driver does not init the owner field before calling
v4l2_async_register_subdev_sensor() and prevents premature module removal.
Fixes: aef69d5475 ("media: v4l: fwnode: Add a convenience function for registering sensors")
Cc: stable@vger.kernel.org
Suggested-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/linux-media/20240315073125.275501-2-sakari.ailus@linux.intel.com/
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a v4l2_fill_pixfmt_mp_aligned helper which allows the user to
specify a custom stride alignment in bytes. This is necessary for
hardware like the Rockchip RGA3, which requires the stride value to be
aligned to a 16 bytes boundary.
The code makes some assumptions about the v4l2 format to simplify the
calculation. They currently hold for all known v4l2 formats.
v4l2_format_plane_stride uses an unsigned int as argument type to avoid
the later multiplication from overflowing the u8 value. All other places
use u8, as no practical use cases for a larger alignment are known at
the moment.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a has_alpha value to the v4l2_format_info struct to indicate if the
format contains an alpha component. This information can currently not
be queried in a generic way, but might be useful for potential drivers
to properly setup alpha blending to copy or set the alpha value.
The implementation is based on the drm_format_info implementation.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vsp1_du_setup_lif() function is used to configure and enable a
pipeline, as well as disable it, depending on the cfg argument being a
valid pointer or NULL. This creates a confusing API. Improve it by
splitting the function in two, a vsp1_du_enable() function to configure
a pipeline, and a vsp1_du_disable() function to disaple it.
Keep vsp1_du_setup_lif() as an inline wrapper for existing callers in
the DRM subsystem, to simplify merging. The callers will be updated
separately and the old API will then be removed.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20260511235637.3468558-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The LM3559 is very similar to the LM3560, but it operates at much lower
currents. This may result in incorrect current selection if LM3560 ranges
are applied to the LM3559. Implement driver data matching to use
device-specific current configurations.
Since the driver no longer supports platform data and device configuration
is performed more granularly, move the remaining enums from the header
into the driver file and remove the header.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Since there are no users of this driver via platform data, remove the
platform data support and switch to using Device Tree bindings.
Converting to Device Tree assumes dynamic and independent registration of
LEDs. To monitor the configured LEDs, a bitmap has been added. This makes
LED cleanup more robust and less context dependent.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
vb2_read() and vb2_write() return size_t, but propagate
negative errno values from __vb2_perform_fileio().
This relies on implicit signed/unsigned conversions in callers
(e.g. vb2_fop_read()) to recover error codes:
__vb2_perform_fileio() -> -EINVAL
vb2_read() -> (size_t)-EINVAL
vb2_fop_read() -> -EINVAL
This relies on implicit conversions that are not obvious.
These helpers are exported (EXPORT_SYMBOL_GPL) and part of the
vb2 API, so changing their return type may affect existing users.
However, they conceptually follow read/write semantics, where
ssize_t is typically used to return either a byte count or a
negative error code.
Switch vb2_read() and vb2_write() to ssize_t, and update
__vb2_perform_fileio() accordingly.
Signed-off-by: Zile Xiong <xiongzile99@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b25748fe61 ("[media] v4l: videobuf2: add read() and write() emulator")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The recently added v4l2_subdev_get_frame_desc_passthrough() can be used
directly as an implementation for .get_frame_desc subdev op. However, in
some cases the drivers may want to add some customizations, while the
bulk of the work is still identical to what
v4l2_subdev_get_frame_desc_passthrough() does. Current locking scheme
makes this impossible to do properly.
Split v4l2_subdev_get_frame_desc_passthrough() into two functions:
__v4l2_subdev_get_frame_desc_passthrough(), which takes a locked subdev
state as a parameter, instead of locking and getting the active state
internally. Other than that, it does the same as
v4l2_subdev_get_frame_desc_passthrough() used to do.
v4l2_subdev_get_frame_desc_passthrough(), which locks the active state
and calls __v4l2_subdev_get_frame_desc_passthrough().
In other words, v4l2_subdev_get_frame_desc_passthrough() works as
before, but drivers can now alternatively add custom .get_frame_desc
code and call v4l2_subdev_get_frame_desc_passthrough().
An example use case is with DS90UB953 serializer: in normal use the
serializer passes through everything, but when test-pattern-generator
(TPG) is used, an internal TPG source is used. After this commit, the
UB953 get_frame_desc() can lock the state, look at the routing table to
see if we're in normal or TPG mode, then either call
__v4l2_subdev_get_frame_desc_passthrough() if in normal mode, or
construct a TPG frame desc if in TPG mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
[Sakari Ailus: Rebase on an earlier remote source pad error code fix.]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In general drivers get their firmware graph endpoints from system
firmware, but on some systems this information is conveyed to drivers via
software nodes. The software nodes may be instantiated only after the
drivers are first probed, requiring drivers to explicitly issue
-EPROBE_DEFER when endpoints aren't found.
Instead of doing this in all (or at least most) drivers, make v4l2-fwnode
endpoint parsing functions v4l2_fwnode_endpoint_parse() and
v4l2_fwnode_endpoint_alloc_parse() return -EPROBE_DEFER when an endpoint
is NULL.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
sensor:increase IR_MAX_DURATION to 1000ms
to fix long IR remote timeouts Certain infrared remotes
(e.g., brand-specific smart home remotes, custom consumer electronics)
send extended code sequences that exceed the default 500ms
IR_MAX_DURATION threshold. This causes the kernel's raw
IR driver to discard incomplete code, resulting in unrecognized commands.
Increase IR_MAX_DURATION to 1000ms:
- Aligns with common extended IR protocol specs
(most long sequences use 700-900ms)
- No impact on standard remotes
(all mainstream IR codes are <500ms)
- Validated on vivo X200 and vivo X300,
resolves timeout issues without regressions
Signed-off-by: LiPeng Huang <huanglipeng@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Pull media updates from Mauro Carvalho Chehab:
- Add support for GMSL1 and GMSL‑coax modules (PCI mgb4)
- Add driver for TI VIP
- AV1 – first kernel support (pixel‑format, decoder, transcoder)
- Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1)
- Synopsys CSI‑2 receiver driver
- Verisilicon & rkvdec – major fixes and enhancements
- IPU6 (and 7) fixes and preparation for metadata
- omap3isp: v4l2-compliance updates
- Fix DVB streaming, drop wait_prepare/finish (dvb/vb2)
* tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits)
media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer
media: uvcvideo: Fix allocation for small frame sizes
media: uvcvideo: Return queued buffers on start_streaming() failure
media: uvcvideo: Create an ID namespace for streaming output terminals
media: rkvdec: Add HEVC support for the VDPU383 variant
media: rkvdec: Add HEVC support for the VDPU381 variant
media: rkvdec: Add H264 support for the VDPU383 variant
media: rkvdec: Add H264 support for the VDPU381 variant
media: rkvdec: Disable multicore support
media: rkvdec: Enable all clocks without naming them
media: rkvdec: Support per-variant interrupt handler
media: rkvdec: Add RCB and SRAM support
media: rkvdec: Add variant specific coded formats list
media: rkvdec: Move hevc functions to common file
media: rkvdec: Move h264 functions to common file
media: rkvdec: Use structs to represent the HW RPS
media: rkvdec: Move cabac tables to their own source file
media: rkvdec: Switch to using structs instead of writel
media: visl: Add HEVC short and long term RPS sets
media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls
...
v4l2_fwnode_endpoint_parse() and v4l2_fwnode_endpoint_alloc_parse() take
a fwnode as the first argument and leave it up to the caller to check a
valid fwnode has been obtained through various means. Instead, add a check
here so the callers won't need to do that anymore.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vast majority of the callers of v4l2_ctrl_new_fwnode_properties() do
check the returned error code but the function does not set the control
handler's error on failure. This will make error handling more complicated
and prone for bugs.
Always assign the control handler's error field on error in
v4l2_ctrl_new_fwnode_properties().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Adding a reference count to the v4l2_m2m_dev structure allow safely
sharing it across multiple hardware nodes. This can be used to prevent
running jobs concurrently on m2m cores that have some internal resource
sharing.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typos in v4l2_m2m_put documentation]
Keep track of the number of requests and request objects of a media
device. Helps to verify that all request-related memory is freed.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
By default when the last request object is completed, the whole
request completes as well.
But sometimes you want to delay this completion to an arbitrary point in
time so add a manual complete mode for this.
In req_queue the driver marks the request for manual completion by
calling media_request_mark_manual_completion, and when the driver
wants to manually complete the request it calls
media_request_manual_complete().
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Drop the wait_prepare/finish callbacks. Instead require that the vb2_queue
lock field is always set and use that lock when waiting for buffers to
arrive.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since vb2 now relies on the presence of the vb2_queue lock
field and there are no more drivers that use these helpers, it is safe
to drop them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mirela Rabulea
Sven Püschel
Laurent Pinchart
Laurent Pinchart
Svyatoslav Ryhel
Zile Xiong
Tomi Valkeinen
Sakari Ailus
LiPeng Huang
Sean Young
Linus Torvalds
Nicolas Dufresne
Hans Verkuil
Mauro Carvalho Chehab
Hans Verkuil