Before XO refclk is distributed to PCIe/USB/eDP PHYs, it passes through
a QREF block. QREF is powered by dedicated LDO rails, and the clkref_en
register controls whether refclk is gated through to the PHY side.
These clkref controls are different from typical GCC branch clocks:
- only a single enable bit is present, without branch-style config bits
- regulators must be voted before enable and unvoted after disable
Model this as a dedicated clk_ref clock type with custom clk_ops instead
of reusing struct clk_branch semantics.
Also provide a common registration/probe API so the same clkref model
can be reused regardless of where clkref_en registers are placed, e.g.
TCSR on glymur and TLMM on SM8750.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Add support for PLLDSI and its post-dividers in the RZ/V2H CPG driver and
export helper APIs for use by the DSI driver.
Introduce per-PLL-DSI state in the CPG private structure and provide a
set of helper functions that find valid PLL parameter combinations for
a requested frequency. The new helpers are rzv2h_get_pll_pars(),
rzv2h_get_pll_div_pars(), rzv2h_get_pll_divs_pars() and
rzv2h_get_pll_dtable_pars() and they are exported in the "RZV2H_CPG"
namespace for use by other consumers (notably the DSI driver). These
helpers perform iterative searches over PLL parameters (M, K, P, S)
and optional post-dividers and return the best match (or an exact
match when possible).
Move PLL/CLK related limits and parameter types into the shared
include (include/linux/clk/renesas.h) by adding struct rzv2h_pll_limits,
struct rzv2h_pll_pars and struct rzv2h_pll_div_pars plus the
RZV2H_CPG_PLL_DSI_LIMITS() helper macro to define DSI PLL limits.
This change centralises the PLLDSI algorithms so the CPG and DSI
drivers compute PLL parameters consistently and allows the DSI driver
to accurately request rates and program its PLL.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251015192611.241920-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
* clk-determine-rate: (120 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: scmi: migrate round_rate() to determine_rate()
clk: ti: fapll: convert from round_rate() to determine_rate()
clk: ti: dra7-atl: convert from round_rate() to determine_rate()
clk: ti: divider: convert from round_rate() to determine_rate()
clk: ti: composite: convert from round_rate() to determine_rate()
clk: ti: dpll: convert from round_rate() to determine_rate()
clk: ti: dpll: change error return from ~0 to -EINVAL
clk: ti: dpll: remove round_rate() in favor of determine_rate()
clk: tegra: tegra210-emc: convert from round_rate() to determine_rate()
clk: tegra: super: convert from round_rate() to determine_rate()
clk: tegra: pll: convert from round_rate() to determine_rate()
clk: tegra: periph: divider: convert from round_rate() to determine_rate()
clk: tegra: divider: convert from round_rate() to determine_rate()
clk: tegra: audio-sync: convert from round_rate() to determine_rate()
clk: fixed-factor: drop round_rate() clk ops
clk: divider: remove round_rate() in favor of determine_rate()
clk: visconti: pll: convert from round_rate() to determine_rate()
clk: versatile: vexpress-osc: convert from round_rate() to determine_rate()
...
Remove default values for PMC PLL Analog Control Register(ACR) as the
values are specific for each SoC and PLL and load them from PLL
characteristics structure
Co-developed-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[nicolas.ferre@microchip.com: fix pll acr write sequence, preserve val]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate(). Part of these changes were done
using the Coccinelle semantic patch on the cover letter of this
series, and the rest of the changes were manually done.
omap4_dpll_regm4xen_round_rate() is now only called by
omap4_dpll_regm4xen_determine_rate(), so let's merge that functionality
into one function. This is needed for another cleanup to completely
remove the round_rate() clk ops from the clk core.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
This SoC has some leftover code all over the kernel but no boards are
supported anymore. Remove support for da830 from the davinci clock
driver. With it: remove the ifdefs around the data structures as the
da850 remains the only davinci SoC supported and the only user of this
driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250304133423.100884-1-brgl@bgdev.pl
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Because of legacy reasons, the TI clksel composite clocks can have
overlapping reg properties, and use a custom ti,bit-shift property.
For the clksel clocks we can start using of the standard reg property
instead of the custom ti,bit-shift property.
To do this, let's add a ti_clk_get_legacy_bit_shift() helper, and make
ti_clk_get_reg_addr() populate the clock bit offset.
This makes it possible to update the devicetree files to use the reg
property one clock at a time.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Support for all the dm3xx/dm64xx SoCs is no longer
available, so drop all other references to those.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
Pull ARM SoC fixes from Arnd Bergmann:
"These are three fixes for build warnings that came in during the merge
window"
* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: mmp: Make some symbols static
ARM: spear6xx: Staticize few definitions
clk: spear: Move prototype to accessible header
There is an issue when build with older versions of binutils 2.27.0,
arch/arm/mach-at91/pm_suspend.S: Assembler messages:
arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'
Use UL() macro to fix the issue in assembly file.
Fixes: 4fd36e4583 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20221012030635.13140-1-wangkefeng.wang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/clk/spear/spear6xx_clock.c:116:13: warning: no previous prototype for function 'spear6xx_clk_init' [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
as is without any warranty of any kind whether express or implied
without even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The clock register definitions are now used (almost) exclusively in the
clk driver, and that relies on no other mach/*.h header files any more.
Remove the dependency on mach/pxa*-regs.h by addressing the registers
as offsets from a void __iomem * pointer, which is either passed from
a board file, or (for the moment) ioremapped at boot time from a hardcoded
address in case of DT (this should be moved into the DT of course).
Cc: linux-clk@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver needs some low-level register access for setting
the core and bus frequencies. These registers are owned
by the clk driver, so move the low-level access into that
driver with a slightly higher-level interface and avoid
any machine header file dependencies.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull RTC updates from Alexandre Belloni:
"The bulk of the patches are about replacing the uie_unsupported struct
rtc_device member by a feature bit.
Subsystem:
- remove uie_unsupported, all users have been converted to clear
RTC_FEATURE_UPDATE_INTERRUPT and provide a reason
- RTCs with an alarm with a resolution of a minute are now letting
the core handle rounding down the alarm time
- fix use-after-free on device removal
New driver:
- OP-TEE RTC PTA
Drivers:
- sun6i: Add H616 support
- cmos: Fix the AltCentury for AMD platforms
- spear: set range"
* tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits)
rtc: check if __rtc_read_time was successful
rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram
rtc: mc146818-lib: Fix the AltCentury for AMD platforms
rtc: optee: add RTC driver for OP-TEE RTC PTA
rtc: pm8xxx: Return -ENODEV if set_time disallowed
rtc: pm8xxx: Attach wake irq to device
clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h
rtc: remove uie_unsupported
rtc: xgene: stop using uie_unsupported
rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
rtc: hym8563: let the core handle the alarm resolution
rtc: hym8563: switch to devm_rtc_allocate_device
rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT
rtc: efi: switch to devm_rtc_allocate_device
rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature
rtc: spear: fix spear_rtc_read_time
rtc: spear: drop uie_unsupported
rtc: spear: set range
rtc: spear: switch to devm_rtc_allocate_device
rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
...
The RTC power domain in sun6i and newer SoCs manages the 16 MHz RC
oscillator (called "IOSC" or "osc16M") and the optional 32 kHz crystal
oscillator (called "LOSC" or "osc32k"). Starting with the H6, this power
domain also handles the 24 MHz DCXO (called variously "HOSC", "dcxo24M",
or "osc24M") as well. The H6 also adds a calibration circuit for IOSC.
Later SoCs introduce further variations on the design:
- H616 adds an additional mux for the 32 kHz fanout source.
- R329 adds an additional mux for the RTC timekeeping clock, a clock
for the SPI bus between power domains inside the RTC, and removes the
IOSC calibration functionality.
Take advantage of the CCU framework to handle this increased complexity.
This driver is intended to be a drop-in replacement for the existing RTC
clock provider. So some runtime adjustment of the clock parents is
needed, both to handle hardware differences, and to support the old
binding which omitted some of the input clocks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-6-samuel@sholland.org
Like the individual CCU drivers, it can be beneficial for memory
consumption of cross-platform configurations to only load the CCU core
on the relevant platform. For example, a generic arm64 kernel sees the
following improvement when building the CCU core and drivers as modules:
before:
text data bss dec hex filename
13882360 5251670 360800 19494830 12977ae vmlinux
after:
text data bss dec hex filename
13734787 5086442 360800 19182029 124b1cd vmlinux
So the result is a 390KB total reduction in kernel image size.
The one early clock provider (sun5i) requires the core to be built in.
Now that loading the MMC driver will trigger loading the CCU core, the
MMC timing mode functions do not need a compile-time fallback.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211119033338.25486-5-samuel@sholland.org
Qiang YuandAbel Vesa
Tommaso MerciaiandGeert Uytterhoeven
Chris BrandtandGeert Uytterhoeven
Lad PrabhakarandGeert Uytterhoeven
Stephen Boyd
Cristian BirsanandNicolas Ferre
Brian Masney
Bartosz GolaszewskiandStephen Boyd
Tony Lindgren
Duje MihanovićandStephen Boyd
Arnd Bergmann
Linus Torvalds
Kefeng WangandStephen Boyd
Viresh KumarandArnd Bergmann
Lukas BulwahnandStephen Boyd
Thomas GleixnerandGreg Kroah-Hartman
Samuel HollandandAlexandre Belloni
Claudiu BezneaandNicolas Ferre
Thierry Reding