While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518133311.644160-2-u.kleine-koenig@baylibre.com
Signed-off-by: David Heidelberg <david@ixit.cz>
The I2C read operation in the IRQ thread may return -ENXIO
when the controller has not yet provided data after asserting IRQ.
IRQ assertion does not guarantee that data is immediately
available on the I2C bus. In such cases, the read request may
be NACKed, resulting in -ENXIO.
Treat this condition as "no data available yet" and log it at
debug level instead of reporting it as a read failure.
This avoids misleading error messages during normal operation.
Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://patch.msgid.link/20260526-nfc-nxp-nci-treat-enxio-as-no-data-available-yet-v1-1-305bb11b9147@amd.com
Signed-off-by: David Heidelberg <david@ixit.cz>
The main channel Received Signal Strength Indicator (RSSI) measurement
is used to determine whether an RF field is present or not. RSSI != 0
is interpreted as an RF Field is present. This does not take RF noise
and measurement inaccuracy into account, and results in false positives
in the field.
Define a noise level and make sure the RF field is only interpreted as
present when the RSSI is above the noise level.
Fixes: 851ee3cbf8 ("NFC: trf7970a: Don't turn on RF if there is already an RF field")
Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Link: https://patch.msgid.link/20260422100930.581237-1-paul.geurts@prodrive-technologies.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pn532_receive_buf() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already hand
a complete frame to pn533_recv_frame() before allocating a fresh receive
buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted.
Fixes: c656aa4c27 ("nfc: pn533: add UART phy driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260405094003.3-pn533-v2-pengpeng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
s3fwrn82_uart_read() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already
deliver a complete frame before allocating a fresh receive buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted.
Fixes: 3f52c2cb7e ("nfc: s3fwrn5: Support a UART interface")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260402042148.65236-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pn532_receive_buf() appends every incoming byte to dev->recv_skb and
only resets the buffer after pn532_uart_rx_is_frame() recognizes a
complete frame. A continuous stream of bytes without a valid PN532 frame
header therefore keeps growing the skb until skb_put_u8() hits the tail
limit.
Drop the accumulated partial frame once the fixed receive buffer is full
so malformed UART traffic cannot grow the skb past
PN532_UART_SKB_BUFF_LEN.
Fixes: c656aa4c27 ("nfc: pn533: add UART phy driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260326142033.82297-1-pengpeng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bartosz Golaszewski says:
====================
Immutable branch between GPIO and net
Convert remaining users of of_gpio.h to using GPIO descriptors and
remove the header.
* tag 'ib-gpio-remove-of-gpio-h-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: remove of_get_named_gpio() and <linux/of_gpio.h>
nfc: nfcmrvl: convert to gpio descriptors
nfc: s3fwrn5: convert to gpio descriptors
====================
Link: https://patch.msgid.link/20260309093153.10446-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the legacy of_get_named_gpio() / gpio_request_one() /
gpio_set_value() API with the descriptor-based devm_gpiod_get() /
gpiod_set_value() API from <linux/gpio/consumer.h>, removing the
dependency on <linux/of_gpio.h>.
This removes the s3fwrn5_i2c_parse_dt() and s3fwrn82_uart_parse_dt()
functions since devm_gpiod_get() handles both DT lookup and resource
management. The gpio_en and gpio_fw_wake fields in struct phy_common
are changed from int to struct gpio_desc *.
Add rename quirks in gpiolib-of.c for the deprecated "s3fwrn5,en-gpios"
and "s3fwrn5,fw-gpios" properties to maintain backward compatibility
with old device trees.
Signed-off-by: Jialu Xu <xujialu@vimux.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/94FF47746A92BD6B+20260307030623.3495092-2-xujialu@vimux.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111019.18030-3-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111019.18030-2-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace strcpy() with strscpy() which limits the copy to the size of
the destination buffer. Since fw_info->fw_name is an array with a
fixed, declared size, the two-argument variant of strscpy() is used -
the compiler deduces the buffer size automatically.
This is a defensive cleanup replacing the deprecated strcpy()
with the preferred strscpy().
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260302100908.26399-1-tomasz.unger@yahoo.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace strcpy() with strscpy() which limits the copy to the size of
the destination buffer. Since fw_dnld->name is an array, the
two-argument variant of strscpy() is used - the compiler deduces
the buffer size automatically.
This is a defensive cleanup replacing the deprecated strcpy()
with the preferred strscpy().
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260301144345.218628-1-tomasz.unger@yahoo.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
