Add Memory Controller driver support for Tegra238 SOC, including:
- MC client definitions with Tegra238-specific stream IDs
- Reuse of Tegra234 ICC operations for bandwidth management via BPMP-FW
- Device tree compatible string "nvidia,tegra238-mc"
Export tegra234_mc_icc_ops so it can be shared with the Tegra238 MC
driver, as both SoCs use the same ICC aggregation and bandwidth
management logic.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260427073419.567360-3-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The MC interrupt mask registers lose their state across Tegra low power
suspend state (aka. SC7). Without re-applying them on resume, MC
interrupts that were enabled at probe remain masked after wake, so any
post-resume MC error goes unreported.
Factor the existing intmask programming out of tegra_mc_probe() into
tegra_mc_setup_intmask() and reuse it from the system resume callback
so the mask state is restored on wake.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260430095202.1167651-4-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The tegra-mc platform driver does not register any dev_pm_ops, so the
SoC-specific ->resume() is never invoked (e.g. tegra186_mc_resume) on
system wake. On Tegra186 and later this means MC client Stream-ID
override registers are not reprogrammed, and clients behind the ARM
SMMU fault on the first DMA after resume.
Register a dev_pm_ops on the tegra-mc driver and route the system
resume callback into mc->soc->ops->resume() so the existing SID
restore path runs again on wake.
No suspend callback is needed as the resume path reprograms all MC
state from the static SoC tables, so there is nothing to save.
Fixes: fe3b082a6e ("memory: tegra: Add SID override programming for MC clients")
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260430095202.1167651-3-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
In Tegra264, different components from memory subsystems like Memory
Controller Fabric (MCF), HUB, HUB Common (HUBC), Side Band Shim (SBS)
and channels have different interrupt lines for receiving memory
controller error interrupts.
Add support for logging memory controller errors reported by these
memory subsystems on Tegra264 by:
- Renaming tegra_mc_error_names array to tegra20_mc_error_names
because it has a different bit index for error names compared to
Tegra264.
- Defining the intmask registers and mask values supported for
Tegra264.
- Registering interrupt handlers for interrupts associated with these
different MC components which read the interrupt status registers to
determine the type of violation that occurred.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-7-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a new structure for the intmask register e.g. MC_INTMASK_0 and
it's mask value. Add an array of these new structures to prepare for
supporting multiple intmask registers. This is done in preparation for
adding support for Tegra264 which supports multiple intmask registers.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-6-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Introduce new SoC specific fields in tegra_mc_soc struct for high
address mask and error status type mask because Tegra264 has different
values for these than the existing devices. Error status registers
e.g. MC_ERR_STATUS_0 has few bits which indicate the type of the
error. In order to obtain such type of error from error status
register, we use error status type mask. Similarly, these error status
registers have bits which indicate the higher address bits of the
address responsible for mc error. In order to obtain such higher
address, we use high address mask. Make this change to prepare for
adding MC interrupt support for Tegra264.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-5-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add support to enable Memory Controller (MC) and External Memory
Controller (EMC) drivers for Tegra264. The nodes for MC and EMC are
mostly the same as Tegra234 but differ in number of channels and
interrupt numbers.
The patch also adds the bandwidth manager definitions required for
Tegra264 and uses them to populate the memory client table. All of
these are needed to properly enable memory interconnect (ICC) support.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250709222147.3758356-3-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry says this is not used anymore, and doesn't think it makes sense as
an iommu driver. The HW it supports is about 10 years old now and newer HW
uses different IOMMU drivers.
As this is the only driver with a GART approach, and it doesn't really
meet the driver expectations from the IOMMU core, let's just remove it
so we don't have to think about how to make it fit in.
It has a number of identified problems:
- The assignment of iommu_groups doesn't match the HW behavior
- It claims to have an UNMANAGED domain but it is really an IDENTITY
domain with a translation aperture. This is inconsistent with the core
expectation for security sensitive operations
- It doesn't implement a SW page table under struct iommu_domain so
* It can't accept a map until the domain is attached
* It forgets about all maps after the domain is detached
* It doesn't clear the HW of maps once the domain is detached
(made worse by having the wrong groups)
Cc: Thierry Reding <treding@nvidia.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174717.4059518-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
With the introduction of commit 9365bf006f ("PCI: tegra194: Add
interconnect support in Tegra234"), the PCI driver on Tegra194 and later
requires an interconnect provider. However, a provider is currently only
exposed on Tegra234 and this causes PCI on Tegra194 to defer probe
indefinitely.
Fix this by adding a dummy implementation on Tegra194. This allows nodes
to be provided to interconnect consumers, but doesn't do any bandwidth
accounting or frequency scaling.
Fixes: 9365bf006f ("PCI: tegra194: Add interconnect support in Tegra234")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Tested-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/r/20230629160132.768940-1-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Make CPU cluster's bandwidth (BW) request a multiple of MC channels.
CPU OPP tables have BW info per MC channel. But, the actual BW depends
on the number of MC channels which can change as per the boot config.
Get the number of MC channels which are actually enabled in current
boot configuration and multiply the BW request from a CPU cluster with
the number of enabled MC channels. This is not required to be done for
other MC clients.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Interconnect framework support to dynamically set the DRAM
bandwidth from different clients. Both the MC and EMC drivers are
added as ICC providers. The path for any request is:
MC-Client[1-n] -> MC -> EMC -> EMEM/DRAM
MC client's request for bandwidth will go to the MC driver which
passes the client request info like BPMP Client ID, Client type
and the Bandwidth to the BPMP-FW. The final DRAM freq to achieve
the requested bandwidth is set by the BPMP-FW based on the passed
parameters.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon
platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
and a number of drivers now support additional Snapdragon variants, in
particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
(edac) and rpm drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces"
* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: ti: smartreflex: Simplify getting the opam_sr pointer
bus: vexpress-config: Add explicit of_platform.h include
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
ARM: tegra: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
...
On Tegra234 NVDEC firmware is loaded from a secure carveout, where it
has been loaded by a bootloader. When booting NVDEC, we need to tell it
the address of this firmware, which we can determine by checking the
starting address of the carveout. As such, add an MC API to query the
bounds of carveouts, and add related information on Tegra234.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Memory controller drivers for v5.19 - Tegra SoC
Add support for Tegra234 memory controller and for logging memory
controller errors on Tegra186, Tegra194 and Tegra234.
* tag 'memory-controller-drv-tegra-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
Link: https://lore.kernel.org/r/20220509160807.154187-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Ashish Mhetre
Ketan Patil
Krzysztof Kozlowski
Sumit Gupta
Krzysztof Kozlowski
Jason Gunthorpe
Rob Herring
Thierry Reding
Linus Torvalds
Johan Hovold
Nick Alcock
Mikko Perttunen
Arnd Bergmann