The SDAM0 IRQ can be triggered for both EOC (end of conversion) events for
immediate ADC reads done in this driver and for threshold violation events,
based on ADC_TM thresholds configured from the auxiliary ADC_TM driver on
TM channels on the first SDAM.
At present, this interrupt is handled only in the ISR in the main ADC driver.
When the ISR is triggered for an ADC_TM event, this driver notifies the ADC_TM
driver by calling a notifier callback exposed from it for this purpose.
To simplify the interrupt handling in both drivers, share the interrupt between
the drivers. With this, ADC_TM interrupts on SDAM0 will be handled directly in
the ADC_TM driver, so remove the notifier callback and all TM interrupt
handling in the main ADC ISR.
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-gen3_adc_tm-v4-2-011981f756c8@oss.qualcomm.com
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
devm_gpiod_get_optional() returns NULL when the optional GPIO is absent,
but returns an ERR_PTR when the GPIO provider lookup fails, including
probe deferral.
Probe currently logs the ERR_PTR case as if the reset GPIO were simply
absent and keeps the error pointer in reset_gpio. Later ads124s_reset()
treats any non-NULL reset_gpio as a valid descriptor and passes it to
gpiod_set_value_cansleep().
Return the lookup error instead of retaining the ERR_PTR.
Fixes: e717f8c6df ("iio: adc: Add the TI ads124s08 ADC code")
Cc: stable@vger.kernel.org
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In the report from Jaeyoung Chung:
"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in spear_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq().
Fixes: b586e5d9ee ("staging:iio:adc:spear rename device specific state structure to _state")
Reported-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In the report from Jaeyoung Chung:
"lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in lpc32xx_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
lpc32xx_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq().
Fixes: 7901b2a145 ("staging:iio:adc:lpc32xx rename local state structure to _state")
Reported-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
ads1119_triggered_buffer_preenable() resumes the device with
pm_runtime_resume_and_get() before starting a conversion.
If i2c_smbus_write_byte() fails, the function returns the error directly
and leaves the runtime PM usage counter elevated. The matching
postdisable callback is not called when preenable fails, so the reference
is leaked and the device may remain runtime-active indefinitely.
Store the I2C transfer result in ret and drop the runtime PM reference on
failure before returning the error.
Fixes: a9306887eb ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD7380 driver uses generic regmap types and APIs. However, its
Kconfig entry does not select REGMAP.
As a result, AD7380 can be enabled from an allnoconfig-derived config
with SPI_MASTER=y while REGMAP remains unset, causing ad7380.o to fail
to build.
Fixes: b095217c10 ("iio: adc: ad7380: new driver for AD7380 ADCs")
Signed-off-by: Samuel Moelius <samuel.moelius@trailofbits.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
Pull bitmap updates from Yury Norov:
"This includes the new FIELD_GET_SIGNED() helper,
bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple
cleanups.
- new handy helper FIELD_GET_SIGNED() (Yury)
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy)
- __bf_shf() simplification (Yury)
- bitmap_print_to_pagebuf() removal (Yury)
- RISCV/bitrev conditional support (Jindie, Yury)"
* tag 'bitmap-for-7.2' of https://github.com/norov/linux:
MAINTAINERS: BITOPS: include bitrev.[ch]
arch/riscv: Add bitrev.h file to support rev8 and brev8
bitops: Define generic___bitrev8/16/32 for reuse
lib/bitrev: Introduce GENERIC_BITREVERSE
arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE
bitmap: fix find helper documentation
bitmap: drop bitmap_print_to_pagebuf()
cpumask: switch cpumap_print_to_pagebuf() to using scnprintf()
bitfield: wire __bf_shf to __builtin_ctzll
bitops: use common function parameter names
ptp: switch to using FIELD_GET_SIGNED()
rtc: rv3032: switch to using FIELD_GET_SIGNED()
wifi: rtw89: switch to using FIELD_GET_SIGNED()
iio: mcp9600: switch to using FIELD_GET_SIGNED()
iio: pressure: bmp280: switch to using FIELD_GET_SIGNED()
iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED()
iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED()
x86/extable: switch to using FIELD_GET_SIGNED()
bitfield: add FIELD_GET_SIGNED()
IIO: 2nd set of fixes for the 7.1 cycle.
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
* tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits)
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
iio: light: opt3001: fix missing state reset on timeout
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
iio: core: fix uninitialized data in debugfs
iio: backend: fix uninitialized data in debugfs
iio: dac: ad3552r-hs: fix uninitialized data ni ad3552r_hs_write_data_source()
iio: adc: qcom-spmi-iadc: balance enable_irq_wake() on driver unbind
iio: light: al3320a: read both ALS ADC registers again
iio: light: al3010: read both ALS ADC registers again
iio: temperature: tmp006: use devm_iio_trigger_register
iio: buffer: hw-consumer: free scan_mask on buffer release
iio: adc: ad7768-1: Select GPIOLIB
iio: light: veml6030: fix channel type when pushing events
iio: light: acpi-als: Check ACPI_COMPANION() against NULL
iio: resolver: ad2s1210: notify trigger and clear state on fault read error
iio: proximity: vl53l0x: notify trigger and clear IRQ on error paths
iio: gyro: bmg160: wait full startup time after mode change at probe
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
iio: pressure: bmp280: zero-init bmp580 trigger handler buffer
...
nxp_sar_adc_isr_buffer() bails on the first channel-read failure
without calling iio_trigger_notify_done(), so the trigger use_count
is left incremented and iio_trigger_poll_chained() drops subsequent
dispatches until the device is rebound.
Reaching this path means a state machine has gone wrong (driver bug
or the SAR ADC in an unexpected state) rather than a transient bus
issue, so this is hardening rather than a bug fix. If the underlying
condition persists the device is wedged and needs an unbind anyway.
Call iio_trigger_notify_done() on the error exit too, matching the
success path. The nxp_sar_adc_read_notify() duplication is intentional
and avoids a goto label for a two-line bail-out, as suggested by David.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD4880 chip ID was incorrectly set to 0x0750. According to the
datasheet, the product ID registers read 0x00 (PRODUCT_ID_H) and 0x59
(PRODUCT_ID_L), giving a combined chip ID of 0x0059. Fix the value to
match the actual hardware.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add oversampling ratio (OSR) support for CNV burst mode. The accumulator
depth register (ACC_DEPTH_IN(0)) is programmed with the selected OSR at
buffer enable time and before each single-shot read.
Supported OSR values: 1, 2, 4, 8, 16, 32.
Introduce AD4691_MANUAL_CHANNEL() for manual mode channels, which do
not expose the oversampling_ratio attribute since OSR is not applicable
in that mode. A separate manual_channels array is added to
struct ad4691_channel_info and selected at probe time.
The OSR is shared across all channels (in_voltage_sampling_frequency
and in_voltage_oversampling_ratio are info_mask_shared_by_all) because
the chip has one internal oscillator and a single accumulator depth
register (ACC_DEPTH_IN(0)) for all channels.
in_voltage_sampling_frequency represents the effective output rate,
defined as osc_freq / osr. Writing it computes needed_osc = freq * osr
and snaps down to the largest oscillator table entry that satisfies both
osc <= needed_osc and osc % osr == 0, guaranteeing an exact integer
read-back. The result is stored in target_osc_freq_Hz and written to
OSC_FREQ_REG at buffer enable and single-shot time, so sampling_frequency
and oversampling_ratio can be set in any order.
in_voltage_sampling_frequency_available is precomputed at probe for
each OSR value, listing only oscillator table entries that divide
evenly by that OSR, expressed as effective rates (osc_freq / osr).
The list becomes sparser as OSR increases, capping at max_rate / osr.
read_avail picks the precomputed list for the current OSR, making the
returned pointer stable and race-free.
Writing oversampling_ratio stores the new shared OSR and snaps
target_osc_freq_Hz to the largest oscillator table entry that is both
<= old_effective_rate * new_osr and evenly divisible by new_osr. This
preserves an integer read-back of in_voltage_sampling_frequency after
the OSR change while keeping the oscillator as close as possible to the
previous effective rate.
OSR defaults to 1 (no accumulation).
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add SPI offload support to enable DMA-based, CPU-independent data
acquisition using the SPI Engine offload framework.
When an SPI offload is available (devm_spi_offload_get() succeeds),
the driver registers a DMA engine IIO buffer and uses dedicated buffer
setup operations. If no offload is available the existing software
triggered buffer path is used unchanged.
Both CNV Burst Mode and Manual Mode support offload, but use different
trigger mechanisms:
CNV Burst Mode: the SPI Engine is triggered by the ADC's DATA_READY
signal on the GP pin specified by the trigger-source consumer reference
in the device tree (one cell = GP pin number 0-3). For this mode the
driver acts as both an SPI offload consumer (DMA RX stream, message
optimization) and a trigger source provider: it registers the
GP/DATA_READY output via devm_spi_offload_trigger_register() so the
offload framework can match the '#trigger-source-cells' phandle and
automatically fire the SPI Engine DMA transfer at end-of-conversion.
Manual Mode: the SPI Engine is triggered by a periodic trigger at
the configured sampling frequency. The pre-built SPI message uses
the pipelined CNV-on-CS protocol: N+1 16-bit transfers are issued
for N active channels (the first result is discarded as garbage from
the pipeline flush) and the remaining N results are captured by DMA.
All offload transfers use 16-bit frames (bits_per_word=16, len=2).
The SPI Engine assembles received bits into native 16-bit words before
DMA, so offload samples land in CPU-native byte order (IIO_CPU).
Dedicated channel arrays (AD4691_OFFLOAD_CHANNEL) reflect this: they
omit IIO_BE and carry no soft timestamp (DMA delivers data directly to
userspace). The software triggered-buffer path retains its IIO_BE
channels because bits_per_word=8 causes SPI to deliver bytes MSB-first
into memory, making the on-disk layout big-endian. Both paths use
storagebits=16 as transfers are 16 bits wide in both cases.
IIO_BUFFER_DMAENGINE is selected because the offload path uses
devm_iio_dmaengine_buffer_setup_with_handle() to allocate and
attach the DMA RX buffer to the IIO device.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add buffered capture support using the IIO triggered buffer framework.
CNV Burst Mode: the GP pin identified by interrupt-names in the device
tree is configured as DATA_READY output. The IRQ handler stops
conversions and fires the IIO trigger; the trigger handler executes a
pre-built SPI message that reads all active channels from the AVG_IN
accumulator registers and then resets accumulator state and restarts
conversions for the next cycle.
Manual Mode: CNV is tied to SPI CS so each transfer simultaneously
reads the previous result and starts the next conversion (pipelined
N+1 scheme). At preenable time a pre-built, optimised SPI message of
N+1 transfers is constructed (N channel reads plus one NOOP to drain
the pipeline). The trigger handler executes the message in a single
spi_sync() call and collects the results. An external trigger (e.g.
iio-trig-hrtimer) is required to drive the trigger at the desired
sample rate.
Both modes share the same trigger handler and push a complete scan —
one big-endian 16-bit (__be16) slot per active channel, densely packed
in scan_index order, followed by a timestamp.
The CNV Burst Mode sampling frequency (PWM period) is exposed as a
buffer-level attribute via IIO_DEVICE_ATTR.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the Analog Devices AD4691 family of high-speed,
low-power multichannel SAR ADCs: AD4691 (16-ch, 500 kSPS),
AD4692 (16-ch, 1 MSPS), AD4693 (8-ch, 500 kSPS) and
AD4694 (8-ch, 1 MSPS).
The driver implements a custom regmap layer over raw SPI to handle the
device's mixed 1/2/3/4-byte register widths and uses the standard IIO
read_raw/write_raw interface for single-channel reads.
The chip idles in Autonomous Mode so that single-shot read_raw can use
the internal oscillator without disturbing the hardware configuration.
Three voltage supply domains are managed: avdd (required), vio, and a
reference supply on either the REF pin (ref-supply, external buffer)
or the REFIN pin (refin-supply, uses the on-chip reference buffer;
REFBUF_EN is set accordingly). Hardware reset is performed by asserting
then deasserting the reset-gpios GPIO line (tRESETL minimum pulse width
is 10 ns, satisfied by function-call overhead); the driver then waits
300 µs for the chip to complete its internal reset sequence. A software
reset via SPI_CONFIG_A is used as fallback when no reset GPIO is
provided.
Accumulator channel masking for single-shot reads uses ACC_MASK_REG via
an ADDR_DESCENDING SPI write, which covers both mask bytes in a single
16-bit transfer.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the AD4884, a dual-channel, 16-bit, 40 MSPS SAR ADC.
The AD4884 is the dual-channel variant of the AD4084, sharing the same
register map and SPI interface as the rest of the AD4080 family. Like
the AD4880, it uses two independent ADC channels, each with its own SPI
configuration interface.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous union.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Remove unused includes and add what is being used:
#include <linux/array_size.h> // for ARRAY_SIZE
#include <linux/bits.h> // for GENMASKxx
#include <linux/dev_printk.h> // for dev_err_probe, dev_info
#include <linux/math.h> // for DIV_ROUND_UP
#include <linux/mutex.h> // for struct mutex
#include <linux/types.h> // for uXX definitions
#include <linux/iio/types.h> // for IIO_CHAN_INFO_*
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jishnu Prakash
Linus Torvalds
Andy Shevchenko
Uwe Kleine-König (The Capable Hub)
Joshua Crofts
Pengpeng Hou
Maxwell Doose
Guangshuo Li
Samuel Moelius
Greg Kroah-Hartman
Stepan Ionichev
Jonathan Cameron
Antoniu Miclaus
Radu Sabau
Rodrigo Gobbi