When a fan tach channel is present, npcm7xx_pwm_fan_probe() starts
fan_timer. The timer callback polls tach state and rearms the timer, but
the driver has no remove callback or devm cleanup action to stop it. On
device detach, the devm-managed driver data and I/O mappings can be
released while the timer is still pending or running.
Register a devm cleanup action before starting the timer and shut the
timer down synchronously from that action.
This issue was found by a static analysis tool.
Fixes: f1fd4a4db7 ("hwmon: Add NPCM7xx PWM and Fan driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Link: https://lore.kernel.org/r/20260729100116.790-1-getshell@seu.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pmbus_update_byte_data() is supposed to return a negative error code or 0.
However, if no change is made to the register, it actually returns the
register value. This can result in problems if the calling code explicitly
expects to see an error code or 0.
Fix it to return 0 on success or the error code as expected.
Fixes: 11c119986f ("hwmon: (pmbus) add helpers for byte write and read modify write")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adt7470_pwm_read() currently ignores failures returned by
pwm1_freq_get(). If the register read fails, the negative error code is
returned through *val while the function itself reports success,
potentially exposing a negative PWM frequency through sysfs.
Fix this by using the cached PWM frequency maintained by the driver,
eliminating the register access from the read path.
Apart from the corrected error propagation and using the cached value,
no functional change is intended.
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-6-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ADT7470_PWM3_AUTO_MASK and ADT7470_PWM4_AUTO_MASK macros are
currently defined with swapped bit values.
According to Table 22 of the ADT7470 datasheet, the Fan Control Mode
Configuration for register 0x69 follows the exact same bit position
layout as register 0x68:
- 0x68 Bit[7] corresponds to BHVR1 (PWM1) -> 0x80
- 0x68 Bit[6] corresponds to BHVR2 (PWM2) -> 0x40
- 0x69 Bit[7] corresponds to BHVR3 (PWM3) -> 0x80
- 0x69 Bit[6] corresponds to BHVR4 (PWM4) -> 0x40
Consequently, PWM3 should use mask 0x80 and PWM4 should use 0x40.
This typo did not cause any functional bugs because these specific
macros are never referenced in the driver code. Instead, the driver
correctly applies the configuration by relying on the modulo parity of
the channel index (e.g., `channel % 2`) to selectively apply either
ADT7470_PWM1_AUTO_MASK (0x80) or ADT7470_PWM2_AUTO_MASK (0x40).
Since the bit layout is identical between the two configuration
registers, the hardware is currently configured correctly.
Fix the macro definitions to reflect the datasheet accurately and
prevent future bugs or confusion during code review and refactoring.
As this is a purely cosmetic fix with no functional impact, a backport
to stable kernels is not necessary.
Fixes: 6f9703d0be ("hwmon: add support for adt7470")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-4-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When userspace configures 'auto_update_interval' to 0 via sysfs, the
background kthread executes schedule_timeout_interruptible(0), which
returns immediately.
If 'num_temp_sensors' is concurrently or previously set to 0, the
msleep_interruptible() delay inside adt7470_read_temperatures() also
becomes 0. This combination forces the background thread into a tight,
unbounded busy-loop, hogging the CPU and flooding the I2C bus with a
continuous stream of transactions.
Fix this vulnerability by raising the lower limit of the clamp_val in
auto_update_interval_store() from 0 to 500 milliseconds. This guarantees
a reasonable minimum sleep window between sensor updates, protecting the
system from intentional or accidental I2C bus denial of service.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/r/20260716213252.EACA71F000E9@smtp.kernel.org
Fixes: 89fac11cb3 ("adt7470: make automatic fan control really work")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-3-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adt7470_temp_write() and adt7470_pwm_write() update the driver's
cached values (temp_min, temp_max, pwm_input, pwm_enable) before issuing
the corresponding regmap_write(), and never check whether the write
succeeded before committing that update. If the I2C transaction fails,
the function correctly propagates the error to the caller, but the cache
silently keeps the new value, which was never actually applied to the
hardware. Subsequent reads then report a value that does not match the
device state.
Reorder both write paths to update the cache only after a successful
regmap_write(), so the cache always reflects what was actually
written to the hardware.
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-2-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
During adt7470_read_temperatures(), the driver temporarily switches
the PWM channels to manual mode, performs the temperature collection,
and then restores the original configuration registers.
However, if an I2C transaction fails at any point after entering manual
mode, the function aborts and returns immediately. This leaves the
configuration registers un-restored, permanently trapping the fans in
manual mode.
Introduce a recovery path to ensure that the original PWM configuration
registers are always restored, even when intermediate I2C operations
fail.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/r/20260716213252.EACA71F000E9@smtp.kernel.org
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-1-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
During initialization of the nct6116 chip, the driver sets data->pwm_num
to 5. However, it assigns several NCT6106 register arrays (such as
NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and
NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP.
These arrays only contain 3 elements.
In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If
data->has_pwm has bits 3 or 4 set (which is structurally possible for
nct6116), the loop attempts to read elements at index 3 and 4 from these
3-element arrays. This results in a global out-of-bounds read, which can
be caught by KASAN.
Furthermore, the driver uses these garbage out-of-bounds values as
hardware register addresses for subsequent read and write operations. This
leads to invalid hardware register access, potentially causing hardware
misconfiguration or system crashes.
The underlying problem is that the chip does support up to five fan
control channels, but only the first three support weight control.
Fix the problem by extending the affected weight register arrays with
zeroed fields. The driver uses zeroed register addresses to determine
if a register is supported or not, and skips accesses for unsupported
registers.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 29c7cb485b ("hwmon: (nct6775) Integrate new model nct6116")
Cc: Björn Gerhart <gerhart@posteo.de>
Cc: Florian Bezdeka <florian.bezdeka@siemens.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko is concerned that reading a PWM frequency multiplier outside
the supported range of [1, 31] might result in bad PWM values written
to the chip. Technically, the chip should never return a value with
the upper 3 bits set, so this should never happen. However, it is
unknown if there are LM63 variants where the upper bits of the register
can be written.
Mask the register value read from the chip to only accept the lower 5 bit
when reading it from the chip to avoid the problem.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
When send_output_report() calls hid_hw_output_report(), the underlying USB
HID core calls usb_interrupt_msg() which maps this buffer directly for DMA.
When the DMA mapping flushes or invalidates the cacheline, it will corrupt
the adjacent variables (mutex, update_interval) that were modified
concurrently by the CPU. This causes memory corruption due to cacheline
sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA
API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings
for this violation.
Any operation that triggers send_output_report() (like setting a fan speed
or updating the interval) causes the USB DMA mapping. On systems with
non-coherent caches, this structural bug causes immediate and deterministic
memory corruption.
Align the output buffer to ARCH_DMA_MINALIGN to fix the problem.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 53e68c20ae ("hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.")
Cc: Aleksandr Mezin <mezin.alexander@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Userspace can read sysfs attributes before driver registration is complete,
immediately after devm_hwmon_device_register_with_info() has been called.
At that time, data->hwmon_dev is not yet initialized. This can trigger
a NULL pointer access since lm90_update_device() and with it
lm90_update_alarms_locked() will be called. This call schedules
report_work and lm90_report_alarms(), which passes the still-NULL
data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer
dereference.
Fix the problem by only scheduling the report and alert workers
data->hwmon_dev is set.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: f6d0775119 ("hwmon: (lm90) Rework alarm/status handling")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
In sht3x_update_client(), the 16-bit temperature and humidity values are
extracted from a stack-allocated byte array using be16_to_cpup(). The
pointers passed to this function are calculated as buf and buf + 3. Since
the difference between the two pointers is an odd number of bytes, at
least one of them is guaranteed to be at an unaligned offset.
This will trigger an alignment fault on strict-alignment architectures
such as ARMv5 or SPARC, resulting in a kernel panic.
Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(),
and put_unaligned_be16() instead of cpu_to_be16().
Fixes: 7c84f7f80d ("hwmon: add support for Sensirion SHT3x sensors")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Coverity reports an out-of-bounds access when reading the minimum alarm
voltage for the VGPIO channel. Add the missing return statement to fix
the problem.
Fixes: cbc29538db ("hwmon: Add driver for LTC4282")
Cc: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports several integer overflow problems in the ina2xx driver
caused by unbounded multiplications and inadequate types for intermediate
calculations.
Specifically:
- In ina2xx_get_value(), the return type is changed from int to long.
Intermediate calculations for current are now performed using 64-bit
types to prevent 32-bit integer overflow before the division by 1000.
- When calculating power in ina2xx_get_value() and
sy24655_average_power_read(), interim values are cast to u64 and clamped
to LONG_MAX. This prevents overflow when regval or accumulator_24 is
multiplied by power_lsb_uW.
- In ina226_alert_to_reg(), the clamping logic is rewritten using min_t().
This safely avoids integer overflows when scaling user-provided values
for shunt voltage, bus voltage, power, and current limits.
Cc: Loic Poulain <loic.poulain@oss.qualcomm.com>
Fixes: ab7fbee452 ("hwmon: (ina2xx) Fix various overflow issues")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pmbus_notify() calls sysfs_notify() and kobject_uevent() on the i2c
client's kobject, but the alarm attributes live on the hwmon class
device registered by pmbus_do_probe(). Notifying the parent i2c device
is a no-op for both poll(POLLPRI) waiters and udev listeners: the named
attribute does not exist on that kobject.
Notify the hwmon device instead, so poll() wakes up and "change"
uevents fire on the inX_alarm/tempX_alarm attributes when SMBALERT#
reports a fault.
Fixes: f469bde9af ("hwmon: (pmbus/core) Notify hwmon events")
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Link: https://lore.kernel.org/r/20260723-fix_hwmon_notify_v1-v1-1-5a24c528686d@free.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Unlike NCT6106, NCT6116 only has three temperature registers, and with
it only three temperature source and temperature source configuration
registers. The register addresses match those of NCT6106 and can be
re-used.
The code used a separate array to list the temperature source registers
for NCT6116, but used the size of the NCT6106 register array to set
the number of registers. The NCT6106 register array provides six addresses,
while the temperature source register array for NCT6116 only provides three
addresses. This causes a KASAN report.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775]
Read of size 2 at addr ffffffffc19561a6 by task modprobe/954
...
Call Trace:
dump_stack+0x7d/0xa7
print_address_description.constprop.0+0x1c/0x220
? __kasan_kmalloc.constprop.0+0xc9/0xd0
? __kmalloc_node_track_caller+0x194/0x5b0
? nct6775_probe+0x936/0x46f0 [nct6775]
? nct6775_probe+0x936/0x46f0 [nct6775]
...
Fix the problem by hard-coding the number of temperature and temperature
configuration registers to three for NCT6116. Drop the unnecessary
NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE.
Reported-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Closes: https://lore.kernel.org/linux-hwmon/57cfc3fa-d4e9-4c10-8aa7-4ad0af7ebebe@roeck-us.net/T/#t
Fixes: 29c7cb485b ("hwmon: (nct6775) Integrate new model nct6116")
Cc: Björn Gerhart <gerhart@posteo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The OCC poll response parser walks a counted list of sensor data blocks.
It used the static backing-array capacity as the parse boundary, but a
transport response makes only data_length bytes current and valid. A
truncated response can therefore make the parser consume a block header or
block extent outside the current response.
Use data_length as the parent boundary, prove the fixed poll header and
each current block header before reading them, and prove the complete block
before advancing. Keep parsed sensor metadata local until the complete
response has passed validation, then publish it. Propagate
malformed-response errors before publishing the OCC as active.
Fixes: aa195fe49b ("hwmon (occ): Parse OCC poll response")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20260720115826.14813-1-pengpeng@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
MAX34451 and ADPM chips do not support standard PMBus VIN/IIN limit
registers, manufacturer specific min/max registers, or undercurrent
or undertemperature fault limits. STATUS_BYTE and STATUS_OTHER are also
not available. Accessing these non-existent registers during driver
initialization triggers a CML error and asserts ALERT. Handled by
blocking these functions during read/write.
Fixes: 7a001dbab4 ("hwmon: (pmbus/max34440) Add support for MAX34451.")
Fixes: 629cf8f6c2 ("hwmon: (pmbus/max34440) Add support for ADPM12160")
Fixes: 2e0b52f1ae ("hwmon: (pmbus/max34440): add support adpm12200")
Fixes: 479bfeba2e ("hwmon: (pmbus/max34440): add support adpm12250")
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260716-max34451_fixes-v1-1-a941b27eaecb@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: f3b4b146eb ("hwmon: Add driver for NZXT Kraken X and Z series AIO CPU coolers")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
