Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Change the return type of drm_sysfb_get_visible_size() to s64 so
that it returns a possible errno code from _get_validated_size0().
Fix callers to handle the errno code.
The currently returned unsigned type converts an errno code to a
very large size value, which drivers interpret as visible size of
the system framebuffer. Later efforts to reserve the framebuffer
resource fail.
The bug has been present since efidrm and vesadrm got merged. It
was then part of each driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Fixes: a84eb6abe2 ("drm/sysfb: Add vesadrm for VESA displays")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Link: https://patch.msgid.link/20260618084327.46567-4-tzimmermann@suse.de
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
Set PM ops for the vesadrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-6-tzimmermann@suse.de
Set PM ops for the simpledrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-5-tzimmermann@suse.de
Set PM ops for the ofdrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-4-tzimmermann@suse.de
Set PM ops for the efidrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-3-tzimmermann@suse.de
Set PM ops for the corebootdrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-2-tzimmermann@suse.de
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
Thomas Zimmermann needs 2f42c1a616 ("drm/ast: dp501: Fix
initialization of SCU2C") for drm-misc-next.
Conflicts:
- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
Just between e927b36ae1 ("drm/amd/display: Fix NULL pointer
dereference in dcn401_init_hw()") and it's cherry-pick that confused
git.
- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
Deleted in 6b0a611628 ("drm/amd/pm: Unify version check in SMUv11")
but some cherry-picks confused git. Same for v12/v14.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Fix incorrect error checking and memory type confusion in
efidrm_device_create(). devm_memremap() returns error pointers, not
NULL, and returns system memory while devm_ioremap() returns I/O memory.
The code incorrectly passes system memory to iosys_map_set_vaddr_iomem().
Restructure to handle each memory type separately. Use devm_ioremap*()
with ERR_PTR(-ENXIO) for WC/UC, and devm_memremap() with ERR_CAST() for
WT/WB.
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260311064652.2903449-1-nichen@iscas.ac.cn
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Add fields and constants for coreboot framebuffer orientation. Set
corebootdrm's DRM connector state from the values. Not all firmware
provides orientation, so make it optional. Systems without, continue
to use unknown orientation.
v3:
- comment on _HAS_ORIENTATION semantics (Tzung-Bi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> # coreboot
Link: https://patch.msgid.link/20260217155836.96267-13-tzimmermann@suse.de
Add corebootdrm, a DRM driver for coreboot framebuffers. The driver
supports a pre-initialized framebuffer with various packed RGB formats.
The driver code is fairly small and uses the same logic as the other
sysfb drivers. Most of the implementation comes from existing sysfb
helpers.
Until now, coreboot relied on simpledrm or simplefb for boot-up graphics
output. Initialize the platform device for corebootdrm in the same place
in framebuffer_probe(). With a later commit, the simple-framebuffer should
be removed.
v4:
- sort include statements (Tzung-Bi)
v3:
- comment on _HAS_LFB semantics (Tzung-Bi)
- fix typo in commit description (Tzung-Bi)
- comment on simple-framebuffer being obsolete for coreboot
v2:
- reimplement as platform driver
- limit resources and mappings to known framebuffer memory; no
page alignment
- create corebootdrm device from coreboot framebuffer code
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> # coreboot
Link: https://patch.msgid.link/20260217155836.96267-12-tzimmermann@suse.de
Provide drm_sysfb_get_format(), a helper that finds a specific DRM
format from a list of pixel formats. The new function builds upon
drm_sysfb_get_format_si(), which finds the DRM format from a given
instance of struct screen_info. Now get the screen_info's pixel format
in the caller. Allows for matching pixel formats in drivers without
screen_info.
Convert the callers in efidrm and vesadrm to the new interface.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-11-tzimmermann@suse.de
Pull EFI updates from Ard Biesheuvel:
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
* tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Support EDID information
sysfb: Move edid_info into sysfb_primary_display
sysfb: Pass sysfb_primary_display to devices
sysfb: Replace screen_info with sysfb_primary_display
sysfb: Add struct sysfb_display_info
efi: sysfb_efi: Reduce number of references to global screen_info
efi: earlycon: Reduce number of references to global screen_info
efi: sysfb_efi: Fix efidrmfb and simpledrmfb on Valve Steam Deck
efi: sysfb_efi: Convert swap width and height quirk to a callback
efi: sysfb_efi: Fix lfb_linelength calculation when applying quirks
efi: sysfb_efi: Replace open coded swap with the macro
Move x86's edid_info into sysfb_primary_display as a new field named
edid. Adapt all users.
An instance of edid_info has only been defined on x86. With the move
into sysfb_primary_display, it becomes available on all architectures.
Therefore remove this contraint from CONFIG_FIRMWARE_EDID.
x86 fills the EDID data from boot_params.edid_info. DRM drivers pick
up the raw data and make it available to DRM clients. Replace the
drivers' references to edid_info and instead use the sysfb_display_info
as passed from sysfb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of screen_info, store a copy of sysfb_primary_display as
device data. Pick it up in drivers. Later changes will add additional
data to the display info, such as EDID information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Linus Torvalds
Thomas Zimmermann
Dave Airlie
Maxime RipardandDave Airlie
Yuho ChoiandThomas Zimmermann
Simona Vetter
Chen NiandThomas Zimmermann
Kees Cook
