... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by one of the
PCI_DEVICE macros and then list expressions. The latter aren't easily readable
if you're not into PCI. Using named initializers is more explicit and thus
easier to parse.
Also use PCI_DEVICE* helper macros to assign .vendor, .device, .subvendor and
.subdevice where appropriate and skip explicit assignments of 0 (which the
compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an anonymous
union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/
and that requires named initializers. But it's also a nice cleanup on its own.
[ bp: Massage commit message. ]
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20260527061057.3796383-2-u.kleine-koenig@baylibre.com
Nova Lake-H SoCs share similar memory controller registers and IBECC
(In-Band ECC) registers with Panther Lake-H SoCs but use a new memory
subsystem register for IBECC presence detection.
Add Nova Lake-H SoC compute die IDs and create a new configuration
structure for Nova Lake-H SoCs to enable EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Jie Wang <jie.wang@intel.com>
Link: https://patch.msgid.link/20260521123812.3961038-3-qiuxu.zhuo@intel.com
Compared to previous generations, Diamond Rapids RRL (Retry Read error Log)
operates at DDR sub-channel granularity and adds an extra register per set.
It also increases the CORRERRCNT register width from 4 to 8 bytes while
reducing the number of registers from 8 to 4.
Add the Diamond Rapids RRL register configuration table and enable support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Link: https://patch.msgid.link/20260521073112.3881223-9-qiuxu.zhuo@intel.com
To prepare for enabling Diamond Rapids server RRL (Retry Read error Log),
which operates at sub-channel granularity by converting struct
res_config::reg_rrl_ddr from a single pointer to an array (reg_rrl_ddr[2])
and updating all users in i10nm_edac and skx_common accordingly.
Initialize only reg_rrl_ddr[0] for existing platforms and prepare for
supporting two RRL set groups per DDR channel (one per sub-channel)
when present.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Link: https://patch.msgid.link/20260521073112.3881223-8-qiuxu.zhuo@intel.com
Move RRL (Retry Read error Log) handling from i10nm_edac to skx_common
so it can be shared across EDAC drivers (e.g. imh_edac).
- Move RRL enable/disable and log dumping helpers to skx_common
to avoid code duplication and enable reuse by other drivers.
- Export skx_enable_rrl() and skx_show_rrl()
so common RRL handling can be used by i10nm_edac and imh_edac.
No functional change intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Link: https://patch.msgid.link/20260521073112.3881223-6-qiuxu.zhuo@intel.com
RRL (Retry Read error Log) ownership is currently inferred from
retry_rd_err_log magic values, making control semantics implicit
and harder to understand.
Introduce rrl_ctrl_mode to explicitly describe whether RRL is
controlled by none, BIOS, or Linux, and replace direct checks with
named control states to improve readability and maintainability.
No functional change intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Link: https://patch.msgid.link/20260521073112.3881223-5-qiuxu.zhuo@intel.com
skx_set_decode() currently handles both address decoding and Retry
Read error Log (RRL) reporting, coupling two independent functions
in a single API. This complicates setup/teardown and forces callers
to update unrelated state.
Introduce skx_set_show_rrl() and keep skx_set_decode() focused on
decode setup, allowing decode and RRL handling to be managed
independently.
Also rename the callback type and variable to skx_show_rrl_f and
show_rrl for clearer RRL terminology and consistency.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Link: https://patch.msgid.link/20260521073112.3881223-3-qiuxu.zhuo@intel.com
Both i10nm_basic.c and imh_basic.c use identical helpers for accessing
memory controller MMIO-based registers. Move these helpers to skx_common.c
to eliminate code duplication. This change also prepares for an upcoming
patch that will move RRL(retry_rd_err_log) code from i10nm_basic.c to
skx_common.c, which requires these helpers to be available in skx_common.c.
Additionally, prefix these function names with 'skx_' to maintain naming
consistency within the file.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Link: https://patch.msgid.link/20260521073112.3881223-2-qiuxu.zhuo@intel.com
When the skx_get_dimm_attr() helper returns -EINVAL,
skx_get_dimm_info() does not validate these return values before using
them in a shift operation:
size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
If all three values are -22, the shift exponent becomes -66, triggering
a UBSAN shift-out-of-bounds error:
UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c
shift exponent -66 is negative
Fixes: 88a242c987 ("EDAC, skx_common: Separate common code out from skx_edac")
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/tencent_2A0CC835A18366643CBD2865B169948AB409@qq.com
Panther Lake-H SoC memory controller registers for memory topology have
been updated, but the current igen6_edac driver still uses old generation
ones to incorrectly parse memory topology.
Fix the issue by adding memory topology parsing function pointers to the
'struct res_config' and creating a new configuration structure for Panther
Lake-H SoCs to enable igen6_edac to parse memory correctly.
Fixes: 0be9f1af39 ("EDAC/igen6: Add Intel Panther Lake-H SoCs support")
Fixes: 4c36e61069 ("EDAC/igen6: Add more Intel Panther Lake-H SoCs support")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260403054029.3950383-3-qiuxu.zhuo@intel.com
When unloading the igen6_edac driver, there is a call trace:
Device '(null)' does not have a release() function, it is broken and must be fixed.
See Documentation/core-api/kobject.rst.
WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209
...
RIP: 0010:device_release+0x84/0x90
Call Trace:
<TASK>
kobject_put+0x8c/0x220
put_device+0x17/0x30
igen6_unregister_mcis+0xa2/0xe0 [igen6_edac]
igen6_remove+0x82/0xb0 [igen6_edac]
...
Fix the call trace by providing empty release() functions for the
memory controller devices.
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260403054029.3950383-2-qiuxu.zhuo@intel.com
If error reporting is enabled during initialization but initialization
fails immediately after, or during normal driver teardown, error reporting
is left enabled in the mask register even after exit.
Replace i5400_enable_error_reporting() with i5400_set_error_reporting()
to combine enabling/disabling. Disable reporting at initialization
failure and driver exit, before call to i5400_put_devices() for cleanup.
This ensures clean hardware handling by disabling any unused error
reporting bits before exiting.
Signed-off-by: Tushar Tibude <tushar.tibude1000@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20260430084223.9298-4-tushar.tibude1000@gmail.com
If error reporting is enabled during initialization but initialization
fails immediately after, or during normal driver teardown, error reporting
is left enabled in the mask register even after exit.
Replace i5000_enable_error_reporting() with i5000_set_error_reporting()
to combine enabling/disabling. Disable reporting at initialization
failure and driver exit, before call to i5000_put_devices() for cleanup.
This ensures clean hardware handling by disabling any unused error
reporting bits before exiting.
Signed-off-by: Tushar Tibude <tushar.tibude1000@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20260430084223.9298-2-tushar.tibude1000@gmail.com
If error reporting is enabled during initialization but initialization
fails immediately after, or during normal driver exit, error reporting
is left enabled in the mask register even after exit.
Replace i7300_enable_error_reporting() with i7300_set_error_reporting()
to combine enabling/disabling. Disable reporting at initialization
failure and driver exit, before call to i7300_put_devices() for cleanup.
Add enabled reporting flag to i7300_pvt.
This ensures clean hardware handling by disabling any unused error
reporting bits before exiting.
Signed-off-by: Tushar Tibude <tushar.tibude1000@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20260429094806.25097-1-tushar.tibude1000@gmail.com
The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.
Use a stack-local char array instead of using kzalloc() for name.
Fixes: d5fe2fec6c ("EDAC: Add a driver for the AMD Versal NET DDR controller")
Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260401111856.2342975-1-ptsm@linux.microsoft.com
Pull RAS updates from Borislav Petkov:
- Add new AMD MCA bank names and types to the MCA code, preceded by a
clean up of the relevant places to have them more developer-friendly
(read: sort them alphanumerically and clean up comments) such that
adding new banks is easy
* tag 'ras_core_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce, EDAC/mce_amd: Add new SMCA bank types
x86/mce, EDAC/mce_amd: Update CS bank type naming
x86/mce, EDAC/mce_amd: Reorder SMCA bank type enums
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Add support for AMD Zen 3 (family 19h, models 40h–4fh)
- i10nm: Add GNR error information decoder support as an alternative to
the firmware decoder
- versalnet: Restructure the init/teardown logic for correct and more
readable error handling. Also, fix two memory leaks and a resource
leak
- Convert several internal structs to use bounded flex arrays, enabling
the kernel's runtime checker to catch out-of-bounds memory accesses
- Mark various sysfs attribute tables read-only, preventing accidental
modification at runtime
- The usual fixes and cleanups across the subsystem
* tag 'edac_updates_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/mc: Use kzalloc_flex()
EDAC/ie31200: Make rpl_s_cfg static
EDAC/i10nm: Fix spelling mistake "readd" -> "read"
EDAC/versalnet: Fix device_node leak in mc_probe()
EDAC/versalnet: Fix memory leak in remove and probe error paths
EDAC/amd64: Add support for family 19h, models 40h-4fh
EDAC/i10nm: Add driver decoder for Granite Rapids server
EDAC/sb: Use kzalloc_flex()
EDAC/i7core: Use kzalloc_flex()
EDAC/mpc85xx: Constify device sysfs attributes
EDAC/device: Allow addition of const sysfs attributes
EDAC/pci_sysfs: Constify instance sysfs attributes
EDAC/device: Constify info sysfs attributes
EDAC/device: Drop unnecessary and dangerous casts of attributes
EDAC/device: Drop unused macro to_edacdev_attr()
EDAC/altera: Drop unused field eccmgr_sysfs_attr
EDAC/versalnet: Refactor memory controller initialization and cleanup
Uwe Kleine-König (The Capable Hub)
Qiuxu ZhuoandTony Luck
zhouminandTony Luck
Thorsten BlumandTony Luck
Tushar TibudeandTony Luck
Vasily KhoruzhickandTony Luck
Prasanna Kumar T S MandBorislav Petkov (AMD)
Linus Torvalds