Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
Introduce sysctl knobs to allow configuring DPM watchdog timeouts at
runtime.
Currently, these timeouts are fixed at compile time via
CONFIG_DPM_WATCHDOG_TIMEOUT and CONFIG_DPM_WATCHDOG_WARNING_TIMEOUT.
This limits flexibility if the timeouts need to be adjusted for
different testing scenarios or hardware behaviors without rebuilding
the kernel.
Add the following sysctl files under /proc/sys/kernel/:
- dpm_watchdog_timeout_secs: The total timeout before panic. The
maximum value is capped at CONFIG_DPM_WATCHDOG_TIMEOUT to prevent
unreasonably large timeouts.
- dpm_watchdog_warning_timeout_secs: The warning timeout. The maximum
value is capped at the current dpm_watchdog_timeout_secs.
Both sysctls have a minimum value of 1.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260608021526.1023248-4-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace complete_all() with complete() in device_pm_sleep_init() to allow
it to be called in atomic contexts without triggering a false-positive
WARNING from lockdep_assert_RT_in_threaded_ctx() when
CONFIG_PROVE_RAW_LOCK_NESTING is enabled.
device_pm_sleep_init() may be called during device initialization while
holding a raw_spinlock (e.g., from within device_initialize()), and
complete_all() is unsafe in atomic contexts on PREEMPT_RT kernels.
complete(), which is safe to call from any context, is sufficient here.
complete_all() sets the completion count to UINT_MAX/2 (permanently
signaled), while complete() increments it by 1. Since no threads can be
waiting during device initialization, both are functionally equivalent.
The completion is always reinitialized via reinit_completion() in
dpm_clear_async_state() before each suspend/resume cycle.
However, changing to complete() introduces a potential deadlock for
devices with no PM support (dev->power.no_pm = true). Such devices are
never added to the dpm_list and never go through dpm_clear_async_state(),
so their completion is never reinitialized. A parent device waiting on a
no_pm child across multiple suspend phases would consume the single-use
token in the first phase and block forever in the second.
Fix this by adding an early return in dpm_wait() when dev->power.no_pm is
set, since no_pm devices do not participate in system suspend/resume.
Fixes: 152e1d5920 ("PM: Prevent waiting forever on asynchronous resume after failing suspend")
Signed-off-by: Jiakai Xu <xujiakai24@mails.ucas.ac.cn>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20260523022314.2657232-1-xujiakai24@mails.ucas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Iterating through wakeup sources via sysfs or debugfs can be inefficient
or restricted. Introduce BPF kfuncs to allow high-performance and safe
in-kernel traversal of the wakeup_sources list. There is at least a 30x
speedup for walking 150 wakeup sources and all their attributes.
The new kfuncs include:
- bpf_wakeup_sources_get_head() to obtain the list head.
- bpf_wakeup_sources_read_lock/unlock() to manage the SRCU lock.
For verifier safety, the underlying SRCU index is wrapped in an opaque
'struct bpf_ws_lock' pointer. This enables the use of KF_ACQUIRE and
KF_RELEASE flags, allowing the BPF verifier to strictly enforce paired
lock/unlock cycles and prevent resource leaks.
Signed-off-by: Samuel Wu <wusamuel@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260511174559.659782-2-wusamuel@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To avoid some undesirable interactions between thermal zone suspend
and resume with user space that is running when those operations are
carried out, move them closer to the suspend and resume of devices,
respectively, by updating dpm_prepare() to carry out thermal zone
suspend and dpm_complete() to start thermal zone resume (that will
continue asynchronously).
This also makes the code easier to follow by removing one, arguably
redundant, level of indirection represented by the thermal PM notifier.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/2036875.PYKUYFuaPT@rafael.j.wysocki
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
dev_pm_clear_wake_irq() currently uses a dangerous pattern where
dev->power.wakeirq is read and checked for NULL outside the lock.
If two callers invoke this function concurrently, both might see
a valid pointer and proceed. This could result in a double-free
when the second caller acquires the lock and tries to release the
same object.
Address this by removing the lockless check of dev->power.wakeirq.
Instead, acquire dev->power.lock immediately to ensure the check and
the subsequent operations are atomic. If dev->power.wakeirq is NULL
under the lock, simply unlock and return. This guarantees that
concurrent calls cannot race to free the same object.
Based on a quick scan of current users, I did not find an actual bug as
drivers seem to rely on their own synchronization. However, since
asynchronous usage patterns exist (e.g., in
drivers/net/wireless/ti/wlcore), I believe a race is theoretically
possible if the API is used less carefully in the future. This change
hardens the API to be robust against such cases.
Fixes: 4990d4fe32 ("PM / Wakeirq: Add automated device wake IRQ handling")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260203031943.1924-1-hanguidong02@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the case of an empty wakeup_sources list, wakeup_sources_walk_start()
will return an invalid but non-NULL address. This also affects wrappers
of the aforementioned function, like for_each_wakeup_source().
Update wakeup_sources_walk_start() to return NULL in case of an empty
list.
Fixes: b4941adb24 ("PM: wakeup: Add routine to help fetch wakeup source object.")
Signed-off-by: Samuel Wu <wusamuel@google.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260124012133.2451708-2-wusamuel@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Till now, the runtime PM workqueue has been flagged as freezable, so it
does not process work items during system-wide PM transitions like
system suspend and resume. The original reason to do that was to
reduce the likelihood of runtime PM getting in the way of system-wide
PM processing, but now it is mostly an optimization because (1) runtime
suspend of devices is prevented by bumping up their runtime PM usage
counters in device_prepare() and (2) device drivers are expected to
disable runtime PM for the devices handled by them before they embark
on system-wide PM activities that may change the state of the hardware
or otherwise interfere with runtime PM. However, it prevents
asynchronous runtime resume of devices from working during system-wide
PM transitions, which is confusing because synchronous runtime resume
is not prevented at the same time, and it also sometimes turns out to
be problematic.
For example, it has been reported that blk_queue_enter() may deadlock
during a system suspend transition because of the pm_request_resume()
usage in it [1]. It may also deadlock during a system resume transition
in a similar way. That happens because the asynchronous runtime resume
of the given device is not processed due to the freezing of the runtime
PM workqueue. While it may be better to address this particular issue
in the block layer, the very presence of it means that similar problems
may be expected to occur elsewhere.
For this reason, remove the WQ_FREEZABLE flag from the runtime PM
workqueue and make device_suspend_late() use the generic variant of
pm_runtime_disable() that will carry out runtime PM of the device
synchronously if there is pending resume work for it.
Also update the comment before the pm_runtime_disable() call in
device_suspend_late(), to document the fact that the runtime PM
should not be expected to work for the device until the end of
device_resume_early(), and update the related documentation.
This change may, even though it is not expected to, uncover some
latent issues related to queuing up asynchronous runtime resume
work items during system suspend or hibernation. However, they
should be limited to the interference between runtime resume and
system-wide PM callbacks in the cases when device drivers start
to handle system-wide PM before disabling runtime PM as described
above.
Link: https://lore.kernel.org/linux-pm/20251126101636.205505-2-yang.yang@vivo.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12794222.O9o76ZdvQC@rafael.j.wysocki
Pull more power management updates from Rafael Wysocki:
"Fix a runtime PM unit test added during the 6.18 development cycle and
change the pm_runtime_barrier() return type to void (Brian Norris)"
* tag 'pm-6.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
coccinelle: Drop pm_runtime_barrier() error code checks
PM: runtime: Make pm_runtime_barrier() return void
PM: runtime: Stop checking pm_runtime_barrier() return code
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
Apparently this test is the only code that checks the return code from
pm_runtime_barrier(), and it turns out that's for good reason -- it's
inherently racy, and a bad idea. We're going to make
pm_runtime_barrier() return void, so prepare for that by dropping any
return code checks.
This resolves some test failures seen like the following:
[ 34.559694] # pm_runtime_error_test: EXPECTATION FAILED at drivers/base/power/runtime-test.c:177
[ 34.559694] Expected 1 == pm_runtime_barrier(dev), but
[ 34.559694] pm_runtime_barrier(dev) == 0 (0x0)
[ 34.563604] # pm_runtime_error_test: pass:0 fail:1 skip:0 total:1
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/93259f2b-7017-4096-a31b-cabbf6152e9b@roeck-us.net/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-1-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge updates related to system suspend and hibernation for 6.19-rc1:
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
* pm-sleep: (21 commits)
PM: hibernate: Extra cleanup of comments in swap handling code
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
PM: hibernate: Clean up kernel-doc comment style usage
PM: suspend: Make pm_test delay interruptible by wakeup events
usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks
scsi: Add PM_EVENT_POWEROFF into suspend callbacks
PM: Introduce new PMSG_POWEROFF event
PM: wakeup: Update after recent wakeup source removal ordering change
PM: wakeup: Delete timer before removing wakeup source from list
Documentation: power: Correct a mistaken configuration option
Documentation: power: Add document on debugging shutdown hangs
freezer: Clarify that only cgroup1 freezer uses PM freezer
PM: hibernate: add sysfs interface for hibernate_compression_threads
PM: hibernate: make compression threads configurable
PM: hibernate: dynamically allocate crc->unc_len/unc for configurable threads
PM: hibernate: Rework message printing in swsusp_save()
PM: dpm_watchdog: add module param to backtrace all CPUs
PM: sleep: Introduce CALL_PM_OP() macro to simplify code
PM: console: Fix memory allocation error handling in pm_vt_switch_required()
...
Merge a core power management update and runtime PM framework updates
for 6.19-rc1:
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
* pm-core:
PM: WQ_UNBOUND added to pm_wq workqueue
* pm-runtime:
PCI/sysfs: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
ACPI: TAD: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
PM: runtime: Wrapper macros for ACQUIRE()/ACQUIRE_ERR()
PM: runtime: fix typos in runtime.c comments
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
PM: runtime: docs: Update pm_runtime_allow/forbid() documentation
Some devices can wake up the system from suspend even when their power
domains are turned off. This is possible because their system-wakeup logic
resides in an always-on power domain - indicating that they support
out-of-band system wakeup.
Currently, PM domain core doesn't power off such devices if they are marked
as system wakeup sources. To better represent devices with out-of-band
wakeup capability, this patch introduces a new flag out_band_wakeup in
'struct dev_pm_info'.
Two helper APIs are added:
- device_set_out_band_wakeup() - to mark a device as having out-of-band
wakeup capability.
- device_out_band_wakeup() - to query the flag.
Allow the PM core and drivers to distinguish between regular and
out-of-band wakeup sources, enable more accurate power management decision.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Runtime PM should only be enabled in device_resume_early() if it has
been disabled for the given device by device_suspend_late(). Otherwise,
it may cause runtime PM callbacks to run prematurely in some cases
which leads to further functional issues.
Make two changes to address this problem.
First, reorder device_suspend_late() to only disable runtime PM for a
device when it is going to look for the device's callback or if the
device is a "syscore" one. In all of the other cases, disabling runtime
PM for the device is not in fact necessary. However, if the device's
callback returns an error and the power.is_late_suspended flag is not
going to be set, enable runtime PM so it only remains disabled when
power.is_late_suspended is set.
Second, make device_resume_early() only enable runtime PM for the
devices with the power.is_late_suspended flag set.
Fixes: 443046d1ad ("PM: sleep: Make suspend of devices more asynchronous")
Reported-by: Rose Wu <ya-jou.wu@mediatek.com>
Closes: https://lore.kernel.org/linux-pm/70b25dca6f8c2756d78f076f4a7dee7edaaffc33.camel@mediatek.com/
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12784270.O9o76ZdvQC@rafael.j.wysocki
PMSG_POWEROFF will be used for the PM core to allow differentiating between
a hibernation or shutdown sequence when re-using callbacks for common code.
Hibernation is started by writing a hibernation method (such as 'platform'
'shutdown', or 'reboot') to use into /sys/power/disk and writing 'disk' to
/sys/power/state.
Shutdown is initiated with the reboot() syscall with arguments on whether
to halt the system or power it off.
Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251112224025.2051702-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After a recent change, wakeup_source_activate() will warn that the given
wakeup source is "unregistered" after its timer has been shut down
in wakeup_source_remove() which may be somewhat confusing, so change
the warning message to say that the wakeup source is "unusable".
Accordingly, rename wakeup_source_not_registered() to
wakeup_source_not_usable() and update the comment in it
to also mention the removal of the wakeup source.
Also restore the comment in wakeup_source_remove() regarding the warning
in wakeup_source_activate() that may trigger after shutting down the
wakeup source timer.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12788103.O9o76ZdvQC@rafael.j.wysocki
