Pull MIPS fixes from Thomas Bogendoerfer.
* tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: configs: Enable the current Ingenic USB PHY symbol
MIPS: loongson64: add IRQ work based on self-IPI
MIPS: mm: Add check for highmem before removing memory block
mips: Add build salt to the vDSO
MIPS: DEC: Ensure RTC platform device deregistration upon failure
<linux/mod_devicetable.h> is included in a many files:
$ git grep '<linux/mod_devicetable.h>' ef0c9f75a1 | wc -l
1598
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
The Ingenic USB PHY provider is now built from phy-ingenic-usb.o under
`CONFIG_PHY_INGENIC_USB`.
The Ingenic defconfigs below still enable the stale `CONFIG_JZ4770_PHY`
symbol. That symbol no longer carries the provider object, so the
defconfigs lose the intended USB PHY provider after olddefconfig.
Use `CONFIG_PHY_INGENIC_USB` instead.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since the commit 91840be8f7 ("irq_work: Fix use-after-free in
irq_work_single() on PREEMPT_RT"), we observed the performance of
execve() is significantly impacted on MIPS.
While we are unsure how that commit caused the impact or how to improve
it (or even if it can be improved at all), implementing IRQ work with
self-IPI seems able to mitigate the impaction.
Perhaps this can/should be implemented for other MIPS architecture
processors as well, but we don't have the enough knowledge of them, nor
access to the hardware. So only implement it for loongson64 here.
Link: https://lore.kernel.org/6be1cdd5f91dd7418a32ff372a6f3ae259b19195.camel@xry111.site/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If a device has less physical memory than the highmem threshold
bootmem_init() doesn't set highstart_pfn. This results in highmem_init()
wrongly disabling the entire memory range if the cpu doesn't support
highmem. Add a check that highstart_pfn is non zero before removing the
highmem block.
Fixes: f171b55f14 ("mips: fix HIGHMEM initialization")
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Switch RTC platform device registration from platform_device_register()
to platform_add_devices() so as to make sure any failure will result in
automatic device unregistration.
Fixes: fae67ad431 ("arch/mips/dec: switch DECstation systems to rtc-cmos")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 7.2-rc1.
Nothing major in here, just constant grind of tiny cleanups and coding
style fixes and wrapper removals. Overall more code was removed than
added, always a nice sign that things are progressing forward.
Changes outside of drivers/staging/ was due to the octeon driver
changes, which for some reason also lives partially in the mips
subsystem, someday that all will be untangled and cleaned up, or just
removed entirely, it's hard to tell which is going to be its fate.
Other than octeon driver cleanups, in here are the usual:
- rtl8723bs driver reworking and cleanups, being the bulk of this
merge window given all of the issues and wrappers involved in that
beast of a driver
- most driver cleanups
- sm750fb driver cleanups (which might be done, as this really should
be moved to the drm layer one of these days...)
- other tiny staging driver cleanups and fixes
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (199 commits)
staging: most: video: avoid double free on video register failure
staging: sm750: rename CamelCase variable Bpp to bpp
staging: rtl8723bs: delete superfluous switch statement
staging: sm750fb: Mark g_noaccel, g_nomtrr and g_dualview as __ro_after_init
staging: rtl8723bs: propagate errno through hal xmit path
staging: rtl8723bs: propagate errno through xmit enqueue path
staging: rtl8723bs: convert rtw_xmit_classifier to return errno
staging: rtl8723bs: make rtw_xmit_classifier static
staging: rtl8723bs: simplify rtw_xmit_classifier control flow
staging: rtl8723bs: make _rtw_enqueue_cmd return 0 on success
staging: rtl8723bs: simplify rtw_enqueue_cmd control flow
staging: rtl8723bs: make _rtw_enqueue_cmd static
staging: rtl8723bs: simplify _rtw_enqueue_cmd control flow
staging: rtl8723bs: fix multiple blank lines in more hal/ files
staging: rtl8723bs: remove unused TXDESC_64_BYTES code
staging: rtl8723bs: remove unused DBG_XMIT_BUF and DBG_XMIT_BUF_EXT code
staging: rtl8723bs: fix multiple blank lines in hal/Hal* files
staging: rtl8723bs: fix multiple blank lines in hal/ files
staging: rtl8723bs: rtw_mlme: add blank line for readability
staging: rtl8723bs: rtw_mlme: wrap rtw_sitesurvey_cmd condition
...
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
Pull MIPS updates from Thomas Bogendoerfer:
- use software nodes for GPIO code
- cleanups and fixes
* tag 'mips_7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (41 commits)
mips: select legacy gpiolib interfaces where used
MIPS: lib: Remove '.hidden' for local symbols
MIPS: VDSO: Avoid including .got in dynamic segment
MIPS: smp: report dying CPU to RCU in stop_this_cpu()
MIPS: kernel: proc: Delete unnecessary braces in show_cpuinfo()
MIPS: kernel: proc: Use seq_putc() calls in show_cpuinfo()
mips: sched: Fix CPUMASK_OFFSTACK memory corruption
MIPS: mm: Fix out-of-bounds write in maar_res_walk()
MIPS: ath79: reduce ARCH_DMA_MINALIGN
mips: dts: ar9132: fix wdt node name
mips: Remove remaining defconfig references to the pktcdvd driver
MIPS: mm: remove comment referring to removed CONFIG_MIPS_CMP
MIPS: alchemy: db1300: switch to static device properties
MIPS: alchemy: gpr: switch to static device properties
MIPS: alchemy: db1000: use nodes attached to GPIO chips in properties
MIPS: alchemy: mtx1: attach software nodes to GPIO chips
MIPS: alchemy: provide visible function prototypes to board files
MIPS: alchemy: platform: add missing include
MIPS: ip22-gio: do not export device release function
MIPS: ip22-gio: switch to dynamic root device
...
Pull bitmap updates from Yury Norov:
"This includes the new FIELD_GET_SIGNED() helper,
bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple
cleanups.
- new handy helper FIELD_GET_SIGNED() (Yury)
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy)
- __bf_shf() simplification (Yury)
- bitmap_print_to_pagebuf() removal (Yury)
- RISCV/bitrev conditional support (Jindie, Yury)"
* tag 'bitmap-for-7.2' of https://github.com/norov/linux:
MAINTAINERS: BITOPS: include bitrev.[ch]
arch/riscv: Add bitrev.h file to support rev8 and brev8
bitops: Define generic___bitrev8/16/32 for reuse
lib/bitrev: Introduce GENERIC_BITREVERSE
arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE
bitmap: fix find helper documentation
bitmap: drop bitmap_print_to_pagebuf()
cpumask: switch cpumap_print_to_pagebuf() to using scnprintf()
bitfield: wire __bf_shf to __builtin_ctzll
bitops: use common function parameter names
ptp: switch to using FIELD_GET_SIGNED()
rtc: rv3032: switch to using FIELD_GET_SIGNED()
wifi: rtw89: switch to using FIELD_GET_SIGNED()
iio: mcp9600: switch to using FIELD_GET_SIGNED()
iio: pressure: bmp280: switch to using FIELD_GET_SIGNED()
iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED()
iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED()
x86/extable: switch to using FIELD_GET_SIGNED()
bitfield: add FIELD_GET_SIGNED()
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
AppleTalk has been removed in MacOS X 10.6 (Snow Leopard), in 2009,
according to Wikipedia. We recently got a burst of AI generated
fixes to this protocol which nobody is reviewing.
Let AppleTalk follow AX.25 and hamradio out of the Linux tree.
We we will maintain the code at: github.com/linux-netdev/mod-orphan
for anyone interested in playing with it.
Retain the uAPI for now. No strong reason, simply because I suspect
keeping it will be less controversial.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260615222935.947233-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
A few old machines have not been converted away from the old-style
gpiolib interfaces. Make these select the new CONFIG_GPIOLIB_LEGACY
symbol so the code still works where it is needed but can be left
out otherwise.
This is the list of all gpio_request() calls in mips:
arch/mips/alchemy/devboards/db1000.c: gpio_request(19, "sd0_cd");
arch/mips/alchemy/devboards/db1000.c: gpio_request(20, "sd1_cd");
arch/mips/alchemy/devboards/db1200.c: gpio_request(215, "otg-vbus");
arch/mips/bcm47xx/workarounds.c: err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
arch/mips/bcm63xx/boards/board_bcm963xx.c: gpio_request_one(board.ephy_reset_gpio,
arch/mips/txx9/rbtx4927/setup.c: gpio_request(15, "sio-dtr");
Most of these should be easy enough to change to modern gpio descriptors
or remove if they are no longer in use.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After a recent change in binutils that warns when local symbols have
non-default visibility [1], there are a couple instances when building
arch/mips:
Assembler messages:
{standard input}: Warning: local symbol `__memset' has non-default visibility
Assembler messages:
{standard input}: Warning: local symbol `__memcpy' has non-default visibility
Remove the '.hidden' directives for these symbols to clear up the
warnings, as they are pointless with a local symbol, which is by
definition hidden. This results in no changes to these symbols in nm's
output when assembled with various copies of binutils.
Closes: https://lore.kernel.org/20260509122517.GA1108596@ax162/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c4150acbda1b3ce0602f79cbb7700b39e577be7e [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 2db1ec80dfd5 ("MIPS: VDSO: Fold MIPS_DISABLE_VDSO into
MIPS_GENERIC_GETTIMEOFDAY"), building ARCH=mips allnoconfig with LLVM=1
shows some warnings from llvm-readelf while checking the VDSO for
dynamic relocations:
llvm-readelf: warning: 'arch/mips/vdso/vdso.so.dbg.raw': invalid PT_DYNAMIC size (0xa4)
llvm-readelf: warning: 'arch/mips/vdso/vdso.so.dbg.raw': PT_DYNAMIC dynamic table is invalid: SHT_DYNAMIC will be used
The blamed commit alters the link order of objects into vdso.so.raw,
placing vgettimeofday.o after sigreturn.o. This ultimately results in
the .text section shrinking slightly in size, which in turn changes the
offset of the .dynamic section.
- [ 9] .text PROGBITS 000002f0 0002f0 000930 00 AX 0 0 16
- [10] .dynamic DYNAMIC 00000c20 000c20 000090 08 A 5 0 4
+ [ 9] .text PROGBITS 000002f0 0002f0 000924 00 AX 0 0 16
+ [10] .dynamic DYNAMIC 00000c14 000c14 000090 08 A 5 0 4
Changing the offset of the .dynamic section causes the dynamic segment
size to grow by the same amount, which triggers a warning in
llvm-readelf because PT_DYNAMIC's p_filesz (0xa4) is no longer a
multiple of its sh_entsize (8):
- DYNAMIC 0x000c20 0x00000c20 0x00000c20 0x00098 0x00098 R 0x10
+ DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x000a4 0x000a4 R 0x10
The size of the dynamic segment was already incorrect before the blamed
comment, as it should be 0x90 like the .dynamic section above (18
entries at 8 bytes per entry); it just so happens that 0x98 % 8 is 0,
whereas 0xa4 % 8 is 4, so there was no warning.
Looking at the section to segment mapping of the dynamic segment reveals
that it includes the .got section, as it is implicitly placed after
.dynamic by ld.lld's orphan section heuristics and inherits its segments
from the linker script.
[ 9] .text PROGBITS 000002f0 0002f0 000924 00 AX 0 0 16
[10] .dynamic DYNAMIC 00000c14 000c14 000090 08 A 5 0 4
[11] .got PROGBITS 00000cb0 000cb0 000008 00 WAp 0 0 16
Section to Segment mapping:
Segment Sections...
00 .mips_abiflags
01 .reginfo
02 .mips_abiflags .reginfo .hash .dynsym .dynstr .gnu.version .gnu.version_d .note .text .dynamic .got
03 .dynamic .got
04 .note
Explicitly describe the .got section in the MIPS VDSO linker script
after .rodata, which switches back to the default text segment,
resulting in a dynamic segment that is the exact size of the .dynamic
section as expected with no other layout changes.
- DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x000a4 0x000a4 R 0x10
+ DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x00090 0x00090 R 0x4
- 03 .dynamic .got
+ 03 .dynamic
Closes: https://github.com/ClangBuiltLinux/linux/issues/2166
Fixes: 2db1ec80dfd5 ("MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function
marks the CPU offline for the scheduler via set_cpu_online(false) but
never informs RCU, so RCU keeps expecting a quiescent state from CPUs
that are now spinning forever with interrupts disabled.
As long as nothing waits for an RCU grace period after smp_send_stop()
this is harmless, which is why it went unnoticed. Since commit
91840be8f7 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
however, irq_work_sync() calls synchronize_rcu() on architectures without
an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns
false. That is the asm-generic default used by MIPS. Any irq_work_sync()
issued in the reboot/shutdown path after smp_send_stop() then blocks on
a grace period that can never complete, hanging the reboot:
WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on
...
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu: Offline CPU 1 blocking current GP.
rcu: Offline CPU 2 blocking current GP.
rcu: Offline CPU 3 blocking current GP.
This issue was noticed on several Realtek MIPS switch SoCs (MIPS
interAptiv) and came up during kernel bump downstream in OpenWrt from
6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable
branch. The patch also has been backported all the way back to 6.1.
Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the
generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs
and grace periods can still complete. MIPS shuts down all CPUs here
without going through the CPU-hotplug mechanism, so this report is not
otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug
offline path is not unprecedented: arm64 does the same in cpu_die_early().
There it is an exception for a CPU that was coming online and is aborting
bringup, rather than the default shutdown action as on MIPS.
Fixes: 91840be8f7 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
CC: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Do not use curly brackets at one source code place
where a single statement should be sufficient.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Single characters should occasionally be put into a sequence.
Thus use the corresponding function “seq_putc”.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This patch addresses a critical memory management flaw. When
CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer.
Consequently, sizeof(new_mask) evaluates to the pointer size, causing
copy_from_user() to clobber the mask pointer. Furthermore, the old
logic performed copy_from_user() before allocating the mask.
Fix this by allocating new_mask first. To handle variable-sized user
masks correctly, use cpumask_size() to truncate overly large user masks
or pad undersized masks with zeros before copying the data directly into
the allocated buffer.
Fixes: 295cbf6d63 ("[MIPS] Move FPU affinity code into separate file.")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
maar_res_walk() uses wi->num_cfg as the index into the fixed-size
wi->cfg array, but checks whether the array is full only after it has
filled the selected entry. If walk_system_ram_range() reports more than
16 memory ranges, the overflow call writes one struct maar_config past
the end of the array before WARN_ON() prevents num_cfg from advancing.
Move the full-array check before taking the array slot and return non-zero
when the scratch array is full, so walk_system_ram_range() terminates the
walk instead of invoking the callback for further ranges.
Fixes: a5718fe8f7 ("MIPS: mm: Drop boot_mem_map")
Signed-off-by: Yadan Fan <ydfan@suse.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently, ath79 SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 32 bytes for
ath79 SoCs.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
