Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add missing address-cells 0 to the Local I/O, Extend I/O and PCH-PIC
Interrupt Controller node to silence W=1 warning:
loongson-2k2000.dtsi:364.5-49: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@10000000, using 0 as fallback
Value '0' is correct because:
1. The LIO/EIO/PCH interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add missing address-cells 0 to the Local I/O interrupt controller node
to silence W=1 warning:
loongson-2k1000.dtsi:498.5-55: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe01440, using 0 as fallback
Value '0' is correct because:
1. The Local I/O interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add missing address-cells 0 to the Local I/O and Extend I/O interrupt
controller node to silence W=1 warning:
loongson-2k0500.dtsi:513.5-51: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@0,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe11600, using 0 as fallback
Value '0' is correct because:
1. The Local I/O & Extend I/O interrupt controller do not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
SoC integrated peripherals on LS2K1000 and LS2K2000 could be discovered
as PCI devices, but require sideband interrupts to function, which are
previously described by interrupts and interrupt-parent properties.
However, pci/pci-device.yaml allows interrupts property to only specify
PCI INTx interrupts, not sideband ones. Convert these devices to use
interrupt-extended property, which describes sideband interrupts used by
PCI devices since dt-schema commit e6ea659d2baa ("schemas: pci-device:
Allow interrupts-extended for sideband interrupts"), eliminating
dtbs_check warnings.
Cc: stable@vger.kernel.org
Fixes: 30a5532a32 ("LoongArch: dts: DeviceTree for Loongson-2K1000")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The Loongson-2K2000 integrates one eMMC controller and one SDIO controller.
The module is supported now, enable it.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The Loongson-2K1000 integrates one SDIO controller for SD storage cards
and SDIO cards.
The module is supported now, enable it.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The Loongson-2K0500 integrates two SDIO controllers for SD storage cards
and SDIO cards, supporting SD storage card boot.
The module is supported now, enable it.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
As specified in scripts/install.sh, the priority order is as follows
(from highest to lowest):
~/bin/installkernel
/sbin/installkernel
arch/loongarch/boot/install.sh
Fallback to default install.sh if installkernel is not found.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit 654102df2a ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The GMAC of Loongson chips cannot insert the correct 1.5-2ns delay. So
we need the PHY to insert internal delays for both transmit and receive
data lines from/to the PHY device. Fix this by changing the "phy-mode"
from "rgmii" to "rgmii-id" in dts.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
By now, more Loongson-2K2000 related drivers are supported, such as
clock controller and thermal controller. So we add these device nodes
to the Loongson-2K2000 dts file.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Hongliang Wang
Huacai Chen
Binbin Zhou
Yao Zi
Youling Tang
Conor Dooley
Masahiro Yamada