All architectures now use MMU notifier for KVM page table management.
Remove the Kconfig symbol and the code that is used when it is
disabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement kvm_arch_vcpu_async_ioctl() "natively" in x86 and arm64 instead
of relying on an #ifdef'd stub, and drop HAVE_KVM_VCPU_ASYNC_IOCTL in
anticipation of using the API on x86. Once x86 uses the API, providing a
stub for one architecture and having all other architectures opt-in
requires more code than simply implementing the API in the lone holdout.
Eliminating the Kconfig will also reduce churn if the API is renamed in
the future (spoiler alert).
No functional change intended.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251030200951.3402865-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
Add KVM_GENERIC_MMU_NOTIFIER as a dependency for selecting KVM_GUEST_MEMFD,
as guest_memfd relies on kvm_mmu_invalidate_{begin,end}(), which are
defined if and only if the generic mmu_notifier implementation is enabled.
The missing dependency is currently benign as s390 is the only KVM arch
that doesn't utilize the generic mmu_notifier infrastructure, and s390
doesn't currently support guest_memfd.
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
Rename the "kvm" entry code files and Kconfigs to use generic "virt"
nomenclature so that the code can be reused by other hypervisors (or
rather, their root/dom0 partition drivers), without incorrectly suggesting
the code somehow relies on and/or involves KVM.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The original name was vague regarding its functionality. This Kconfig
option specifically enables and gates the kvm_gmem_populate() function,
which is responsible for populating a GPA range with guest data.
The new name, HAVE_KVM_ARCH_GMEM_POPULATE, describes the purpose of the
option: to enable arch-specific guest_memfd population mechanisms. It
also follows the same pattern as the other HAVE_KVM_ARCH_* configuration
options.
This improves clarity for developers and ensures the name accurately
reflects the functionality it controls, especially as guest_memfd
support expands beyond purely "private" memory scenarios.
Temporarily keep KVM_GENERIC_PRIVATE_MEM as an x86-only config so as to
minimize churn, and to hopefully make it easier to see what features
require HAVE_KVM_ARCH_GMEM_POPULATE. On that note, omit GMEM_POPULATE
for KVM_X86_SW_PROTECTED_VM, as regular ol' memset() suffices for
software-protected VMs.
As for KVM_GENERIC_PRIVATE_MEM, a future change will select KVM_GUEST_MEMFD
for all 64-bit KVM builds, at which point the intermediate config will
become obsolete and can/will be dropped.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the Kconfig option CONFIG_KVM_PRIVATE_MEM to
CONFIG_KVM_GUEST_MEMFD. The original name implied that the feature only
supported "private" memory. However, CONFIG_KVM_PRIVATE_MEM enables
guest_memfd in general, which is not exclusively for private memory.
Subsequent patches in this series will add guest_memfd support for
non-CoCo VMs, whose memory is not private.
Renaming the Kconfig option to CONFIG_KVM_GUEST_MEMFD more accurately
reflects its broader scope as the main Kconfig option for all
guest_memfd-backed memory. This provides clearer semantics for the
option and avoids confusion as new features are introduced.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert HAVE_KVM_IRQ_BYPASS into a tristate so that selecting
IRQ_BYPASS_MANAGER follows KVM={m,y}, i.e. doesn't force irqbypass.ko to
be built-in.
Note, PPC allows building KVM as a module, but selects HAVE_KVM_IRQ_BYPASS
from a boolean Kconfig, i.e. KVM PPC unnecessarily forces irqbpass.ko to
be built-in. But that flaw is a longstanding PPC specific issue.
Fixes: 61df71ee99 ("kvm: move "select IRQ_BYPASS_MANAGER" to common code")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250315024623.2363994-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a Kconfig to allow architectures to opt-out of a TLB flush when a
young page is aged, as invalidating TLB entries is not functionally
required on most KVM-supported architectures. Stale TLB entries can
result in false negatives and theoretically lead to suboptimal reclaim,
but in practice all observations have been that the performance gained by
skipping TLB flushes outweighs any performance lost by reclaiming hot
pages.
E.g. the primary MMUs for x86 RISC-V, s390, and PPC Book3S elide the TLB
flush for ptep_clear_flush_young(), and arm64's MMU skips the trailing DSB
that's required for ordering (presumably because there are optimizations
related to eliding other TLB flushes when doing make-before-break).
Link: https://lore.kernel.org/r/20241011021051.1557902-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add "ARCH" to the symbols; shortly, the "prepare" phase will include both
the arch-independent step to clear out contents left in the page by the
host, and the arch-dependent step enabled by CONFIG_HAVE_KVM_GMEM_PREPARE.
For consistency do the same for CONFIG_HAVE_KVM_GMEM_INVALIDATE as well.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, like with SEV-SNP, guest memory needs to be updated in a
platform-specific manner before it can be safely freed back to the host.
Wire up arch-defined hooks to the .free_folio kvm_gmem_aops callback to
allow for special handling of this sort when freeing memory in response
to FALLOC_FL_PUNCH_HOLE operations and when releasing the inode, and go
ahead and define an arch-specific hook for x86 since it will be needed
for handling memory used for SEV-SNP guests.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-6-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
guest_memfd pages are generally expected to be in some arch-defined
initial state prior to using them for guest memory. For SEV-SNP this
initial state is 'private', or 'guest-owned', and requires additional
operations to move these pages into a 'private' state by updating the
corresponding entries the RMP table.
Allow for an arch-defined hook to handle updates of this sort, and go
ahead and implement one for x86 so KVM implementations like AMD SVM can
register a kvm_x86_ops callback to handle these updates for SEV-SNP
guests.
The preparation callback is always called when allocating/grabbing
folios via gmem, and it is up to the architecture to keep track of
whether or not the pages are already in the expected state (e.g. the RMP
table in the case of SEV-SNP).
In some cases, it is necessary to defer the preparation of the pages to
handle things like in-place encryption of initial guest memory payloads
before marking these pages as 'private'/'guest-owned'. Add an argument
(always true for now) to kvm_gmem_get_folio() that allows for the
preparation callback to be bypassed. To detect possible issues in
the way userspace initializes memory, it is only possible to add an
unprepared page if it is not already included in the filemap.
Link: https://lore.kernel.org/lkml/ZLqVdvsF11Ddo7Dq@google.com/
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleanups to Kconfig definitions for KVM
* replace HAVE_KVM with an architecture-dependent symbol, when CONFIG_KVM
may or may not be available depending on CPU capabilities (MIPS)
* replace HAVE_KVM with IS_ENABLED(CONFIG_KVM) for host-side code that is
not part of the KVM module, so that it is completely compiled out
* factor common "select" statements in common code instead of requiring
each architecture to specify it
CONFIG_IRQ_BYPASS_MANAGER is a dependency of the common code included by
CONFIG_HAVE_KVM_IRQ_BYPASS. There is no advantage in adding the corresponding
"select" directive to each architecture.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask
unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however
was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on
architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly
return nonzero. This however does not make sense, and it prevented userspace
from supporting this architecture-independent feature without recompilation.
Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and
is only used in virt/kvm/kvm_main.c. Userspace does not need to test it
and there should be no need for it to exist. Remove it and replace it
with a Kconfig symbol within Linux source code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GENERIC_MEMORY_ATTRIBUTES requires the generic MMU notifier code, because
it uses kvm_mmu_invalidate_begin/end. However, it would not work with a bespoke
implementation of MMU notifiers that does not use KVM_GENERIC_MMU_NOTIFIER,
because most likely it would not synchronize correctly on invalidation. So
the right thing to do is to note the problematic configuration if the
architecture does not select itself KVM_GENERIC_MMU_NOTIFIER; not to
enable it blindly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.
These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".
Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.
Fixes: 8132d887a7 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/44907c6b-c5bd-4e4a-a921-e4d3825539d8@infradead.org/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All platforms with a kernel irqchip have support for irqfd. Unify the
two configuration items so that userspace can expect to use irqfd to
inject interrupts into the irqchip.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virt/kvm/eventfd.c is compiled unconditionally, meaning that the ioeventfds
member of struct kvm is accessed unconditionally. CONFIG_HAVE_KVM_EVENTFD
therefore must be defined for KVM common code to compile successfully,
remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new x86 VM type, KVM_X86_SW_PROTECTED_VM, to serve as a development
and testing vehicle for Confidential (CoCo) VMs, and potentially to even
become a "real" product in the distant future, e.g. a la pKVM.
The private memory support in KVM x86 is aimed at AMD's SEV-SNP and
Intel's TDX, but those technologies are extremely complex (understatement),
difficult to debug, don't support running as nested guests, and require
hardware that's isn't universally accessible. I.e. relying SEV-SNP or TDX
for maintaining guest private memory isn't a realistic option.
At the very least, KVM_X86_SW_PROTECTED_VM will enable a variety of
selftests for guest_memfd and private memory support without requiring
unique hardware.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231027182217.3615211-24-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce an ioctl(), KVM_CREATE_GUEST_MEMFD, to allow creating file-based
memory that is tied to a specific KVM virtual machine and whose primary
purpose is to serve guest memory.
A guest-first memory subsystem allows for optimizations and enhancements
that are kludgy or outright infeasible to implement/support in a generic
memory subsystem. With guest_memfd, guest protections and mapping sizes
are fully decoupled from host userspace mappings. E.g. KVM currently
doesn't support mapping memory as writable in the guest without it also
being writable in host userspace, as KVM's ABI uses VMA protections to
define the allow guest protection. Userspace can fudge this by
establishing two mappings, a writable mapping for the guest and readable
one for itself, but that’s suboptimal on multiple fronts.
Similarly, KVM currently requires the guest mapping size to be a strict
subset of the host userspace mapping size, e.g. KVM doesn’t support
creating a 1GiB guest mapping unless userspace also has a 1GiB guest
mapping. Decoupling the mappings sizes would allow userspace to precisely
map only what is needed without impacting guest performance, e.g. to
harden against unintentional accesses to guest memory.
Decoupling guest and userspace mappings may also allow for a cleaner
alternative to high-granularity mappings for HugeTLB, which has reached a
bit of an impasse and is unlikely to ever be merged.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to mmap() guest memory).
More immediately, being able to map memory into KVM guests without mapping
said memory into the host is critical for Confidential VMs (CoCo VMs), the
initial use case for guest_memfd. While AMD's SEV and Intel's TDX prevent
untrusted software from reading guest private data by encrypting guest
memory with a key that isn't usable by the untrusted host, projects such
as Protected KVM (pKVM) provide confidentiality and integrity *without*
relying on memory encryption. And with SEV-SNP and TDX, accessing guest
private memory can be fatal to the host, i.e. KVM must be prevent host
userspace from accessing guest memory irrespective of hardware behavior.
Attempt #1 to support CoCo VMs was to add a VMA flag to mark memory as
being mappable only by KVM (or a similarly enlightened kernel subsystem).
That approach was abandoned largely due to it needing to play games with
PROT_NONE to prevent userspace from accessing guest memory.
Attempt #2 to was to usurp PG_hwpoison to prevent the host from mapping
guest private memory into userspace, but that approach failed to meet
several requirements for software-based CoCo VMs, e.g. pKVM, as the kernel
wouldn't easily be able to enforce a 1:1 page:guest association, let alone
a 1:1 pfn:gfn mapping. And using PG_hwpoison does not work for memory
that isn't backed by 'struct page', e.g. if devices gain support for
exposing encrypted memory regions to guests.
Attempt #3 was to extend the memfd() syscall and wrap shmem to provide
dedicated file-based guest memory. That approach made it as far as v10
before feedback from Hugh Dickins and Christian Brauner (and others) led
to it demise.
Hugh's objection was that piggybacking shmem made no sense for KVM's use
case as KVM didn't actually *want* the features provided by shmem. I.e.
KVM was using memfd() and shmem to avoid having to manage memory directly,
not because memfd() and shmem were the optimal solution, e.g. things like
read/write/mmap in shmem were dead weight.
Christian pointed out flaws with implementing a partial overlay (wrapping
only _some_ of shmem), e.g. poking at inode_operations or super_operations
would show shmem stuff, but address_space_operations and file_operations
would show KVM's overlay. Paraphrashing heavily, Christian suggested KVM
stop being lazy and create a proper API.
Link: https://lore.kernel.org/all/20201020061859.18385-1-kirill.shutemov@linux.intel.com
Link: https://lore.kernel.org/all/20210416154106.23721-1-kirill.shutemov@linux.intel.com
Link: https://lore.kernel.org/all/20210824005248.200037-1-seanjc@google.com
Link: https://lore.kernel.org/all/20211111141352.26311-1-chao.p.peng@linux.intel.com
Link: https://lore.kernel.org/all/20221202061347.1070246-1-chao.p.peng@linux.intel.com
Link: https://lore.kernel.org/all/ff5c5b97-acdf-9745-ebe5-c6609dd6322e@google.com
Link: https://lore.kernel.org/all/20230418-anfallen-irdisch-6993a61be10b@brauner
Link: https://lore.kernel.org/all/ZEM5Zq8oo+xnApW9@google.com
Link: https://lore.kernel.org/linux-mm/20230306191944.GA15773@monkey
Link: https://lore.kernel.org/linux-mm/ZII1p8ZHlHaQ3dDl@casper.infradead.org
Cc: Fuad Tabba <tabba@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Maciej Szmigiero <mail@maciej.szmigiero.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Wang <wei.w.wang@intel.com>
Cc: Liam Merwick <liam.merwick@oracle.com>
Cc: Isaku Yamahata <isaku.yamahata@gmail.com>
Co-developed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Co-developed-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Co-developed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-17-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini
Sean Christopherson
Linus Torvalds
Fuad TabbaandPaolo Bonzini
James HoughtonandSean Christopherson
Isaku YamahataandPaolo Bonzini
Michael RothandPaolo Bonzini