Add a selftest for VXLAN vnifilter netlink notifications that verifies
RTM_NEWTUNNEL and RTM_DELTUNNEL are sent correctly when VNIs are added,
deleted, or updated, and that no spurious notifications are sent when
a VNI is re-added with the same attributes.
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-4-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without the previous commit, TCP failed to switch to alternative
IPv6 routes immediately upon carrier loss.
It would persist with the dead route until reaching the threshold
net.ipv4.tcp_retries1, leading to unnecessary delays in failover.
Let's add a selftest for this scenario to ensure TCP fails over
immediately upon a carrier loss event.
Before:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [FAIL]
After:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [ OK ]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sagarika Sharma <sharmasagarika@google.com>
Link: https://patch.msgid.link/20260430200909.527827-3-sharmasagarika@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for the IFLA_BR_STP_MODE bridge attribute that verifies:
1. stp_mode defaults to auto on new bridges
2. stp_mode can be toggled between user, kernel, and auto
3. Changing stp_mode while STP is active is rejected with -EBUSY
4. Re-setting the same stp_mode while STP is active succeeds
5. stp_mode user in a network namespace yields userspace STP (stp_state=2)
6. stp_mode kernel forces kernel STP (stp_state=1)
7. stp_mode auto in a netns preserves traditional fallback to kernel STP
8. stp_mode and stp_state can be set atomically in a single message
9. stp_mode persists across STP disable/enable cycles
Test 5 is the key use case: it demonstrates that userspace STP can now
be enabled in non-init network namespaces by setting stp_mode to user
before enabling STP.
Test 8 verifies the atomic usage pattern where both attributes are set
in a single netlink message, which is supported because br_changelink()
processes IFLA_BR_STP_MODE before IFLA_BR_STP_STATE.
The test gracefully skips if the installed iproute2 does not support
the stp_mode attribute.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Link: https://patch.msgid.link/20260405205224.3163000-4-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that verifies the dst_cache in seg6 lwtunnel is not
shared between the input (forwarding) and output (locally generated)
paths.
The test creates three namespaces (ns_src, ns_router, ns_dst)
connected in a line. An SRv6 encap route on ns_router encapsulates
traffic destined to cafe::1 with SID fc00::100. The SID is
reachable only for forwarded traffic (from ns_src) via an ip rule
matching the ingress interface (iif veth-r0 lookup 100), and
blackholed in the main table.
The test verifies that:
1. A packet generated locally on ns_router does not reach
ns_dst with an empty cache, since the SID is blackholed;
2. A forwarded packet from ns_src populates the input cache
from table 100 and reaches ns_dst;
3. A packet generated locally on ns_router still does not
reach ns_dst after the input cache is populated,
confirming the output path does not reuse the input
cache entry.
Both the forwarded and local packets are pinned to the same CPU
with taskset, since dst_cache is per-cpu.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404004405.4057-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add validation for the nlctrl family, accessing family info and
dumping policies.
TAP version 13
1..4
ok 1 nl_nlctrl.getfamily_do
ok 2 nl_nlctrl.getfamily_dump
ok 3 nl_nlctrl.getpolicy_dump
ok 4 nl_nlctrl.getpolicy_by_op
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20260311032839.417748-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that verifies multicast delivery to a macvlan bridge
port when the source MAC of the incoming frame matches the macvlan's
own MAC address.
This scenario occurs with protocols like VRRP where multiple hosts
share the same virtual MAC address. Without the corresponding kernel
change, macvlan bridge mode does not handle this case and the
multicast frame is not delivered.
Signed-off-by: Kibaek Yoo <psykibaek@gmail.com>
Link: https://patch.msgid.link/20260228071613.4360-2-psykibaek@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new test file bridge_vlan_dump.sh with four test cases that verify
VLANs with different per-VLAN options are not incorrectly grouped into
ranges in the dump output.
The tests verify the kernel's br_vlan_opts_eq_range() function correctly
prevents VLAN range grouping when neigh_suppress, mcast_max_groups,
mcast_n_groups, or mcast_enabled options differ.
Each test verifies that VLANs with different option values appear as
individual entries rather than ranges, and that VLANs with matching
values are properly grouped together.
Example output:
$ ./bridge_vlan_dump.sh
TEST: VLAN range grouping with neigh_suppress [ OK ]
TEST: VLAN range grouping with mcast_max_groups [ OK ]
TEST: VLAN range grouping with mcast_n_groups [ OK ]
TEST: VLAN range grouping with mcast_enabled [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260225143956.3995415-3-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a simple, netns-based topology with double, nested UDP tunnels and
perform TSO transfers on top.
Explicitly enable GSO and/or GRO and check the skb layout consistency with
different configuration allowing (or not) GSO frames to be delivered on
the other end.
The trickest part is account in a robust way the aggregated/unaggregated
packets with double encapsulation: use a classic bpf filter for it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/61f2c98ba0f73057c2d6f6cb62eb807abd90bf6b.1769011015.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 4884 extended certain ICMP messages with a length attribute that
encodes the length of the "original datagram" field. This is needed so
that new information could be appended to these messages without
applications thinking that it is part of the "original datagram" field.
In version 5.9, the kernel was extended with two new socket options
(SOL_IP/IP_RECVERR_4884 and SOL_IPV6/IPV6_RECVERR_RFC4884) that allow
user space to retrieve this length which is basically the offset to the
ICMP Extension Structure at the end of the ICMP message. This is
required by user space applications that need to parse the information
contained in the ICMP Extension Structure. For example, the RFC 5837
extension for tracepath.
Add a selftest that verifies correct handling of the RFC 4884 length
field for both IPv4 and IPv6, with and without extension structures,
and validates that malformed extensions are correctly reported as invalid.
For each address family, the test creates:
- a raw socket used to send locally crafted ICMP error packets to the
loopback address, and
- a datagram socket used to receive the encapsulated original datagram
and associated error metadata from the kernel error queue.
ICMP packets are constructed entirely in user space rather than relying
on kernel-generated errors. This allows the test to exercise invalid
scenarios (such as corrupted checksums and incorrect length fields) and
verify that the SO_EE_RFC4884_FLAG_INVALID flag is set as expected.
Output Example:
$ ./icmp_rfc4884
Starting 18 tests from 18 test cases.
RUN rfc4884.ipv4_ext_small_payload.rfc4884 ...
OK rfc4884.ipv4_ext_small_payload.rfc4884
ok 1 rfc4884.ipv4_ext_small_payload.rfc4884
RUN rfc4884.ipv4_ext.rfc4884 ...
OK rfc4884.ipv4_ext.rfc4884
ok 2 rfc4884.ipv4_ext.rfc4884
RUN rfc4884.ipv4_ext_large_payload.rfc4884 ...
OK rfc4884.ipv4_ext_large_payload.rfc4884
ok 3 rfc4884.ipv4_ext_large_payload.rfc4884
RUN rfc4884.ipv4_no_ext_small_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_small_payload.rfc4884
ok 4 rfc4884.ipv4_no_ext_small_payload.rfc4884
RUN rfc4884.ipv4_no_ext_min_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_min_payload.rfc4884
ok 5 rfc4884.ipv4_no_ext_min_payload.rfc4884
RUN rfc4884.ipv4_no_ext_large_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_large_payload.rfc4884
ok 6 rfc4884.ipv4_no_ext_large_payload.rfc4884
RUN rfc4884.ipv4_invalid_ext_checksum.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_checksum.rfc4884
ok 7 rfc4884.ipv4_invalid_ext_checksum.rfc4884
RUN rfc4884.ipv4_invalid_ext_length_small.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_length_small.rfc4884
ok 8 rfc4884.ipv4_invalid_ext_length_small.rfc4884
RUN rfc4884.ipv4_invalid_ext_length_large.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_length_large.rfc4884
ok 9 rfc4884.ipv4_invalid_ext_length_large.rfc4884
RUN rfc4884.ipv6_ext_small_payload.rfc4884 ...
OK rfc4884.ipv6_ext_small_payload.rfc4884
ok 10 rfc4884.ipv6_ext_small_payload.rfc4884
RUN rfc4884.ipv6_ext.rfc4884 ...
OK rfc4884.ipv6_ext.rfc4884
ok 11 rfc4884.ipv6_ext.rfc4884
RUN rfc4884.ipv6_ext_large_payload.rfc4884 ...
OK rfc4884.ipv6_ext_large_payload.rfc4884
ok 12 rfc4884.ipv6_ext_large_payload.rfc4884
RUN rfc4884.ipv6_no_ext_small_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_small_payload.rfc4884
ok 13 rfc4884.ipv6_no_ext_small_payload.rfc4884
RUN rfc4884.ipv6_no_ext_min_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_min_payload.rfc4884
ok 14 rfc4884.ipv6_no_ext_min_payload.rfc4884
RUN rfc4884.ipv6_no_ext_large_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_large_payload.rfc4884
ok 15 rfc4884.ipv6_no_ext_large_payload.rfc4884
RUN rfc4884.ipv6_invalid_ext_checksum.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_checksum.rfc4884
ok 16 rfc4884.ipv6_invalid_ext_checksum.rfc4884
RUN rfc4884.ipv6_invalid_ext_length_small.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_length_small.rfc4884
ok 17 rfc4884.ipv6_invalid_ext_length_small.rfc4884
RUN rfc4884.ipv6_invalid_ext_length_large.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_length_large.rfc4884
ok 18 rfc4884.ipv6_invalid_ext_length_large.rfc4884
PASSED: 18 / 18 tests passed.
Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260121114644.2863640-1-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a simple ipvtap test to test handling
IP-address add/remove on ipvlan interface.
It creates a veth-interface and then creates several
network-namespace with ipvlan0 interface in it linked to veth.
Then it starts to add/remove addresses on ipvlan0 interfaces
in several threads.
At finish, it checks that there is no duplicated addresses.
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Link: https://patch.msgid.link/20260112142417.4039566-3-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GRO test can run on a real device or a veth.
The Toeplitz hash test can only run on a real device.
Move them from net/ to drivers/net/ and drivers/net/hw/ respectively.
There are two scripts which set up the environment for these tests
setup_loopback.sh and setup_veth.sh. Move those scripts to net/lib.
The paths to the setup files are a little ugly but they will be
deleted shortly.
toeplitz_client.sh is not a test in itself, but rather a helper
to send traffic, so add it to TEST_FILES rather than TEST_PROGS.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We get a significant number of conflicts between net and net-next
because of selftests Makefile changes. People tend to append new
test cases at the end of the Makefile when there's no clear sort
order. Sort all networking selftests Makefiles, use the following
format:
VAR_NAME := \
entry1 \
entry2 \
entry3 \
# end of VAR_NAME
Some Makefiles are already pretty close to this.
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251003210127.1021918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Exercise the scenario described in detail in the cover letter:
1) socket A: connect() from ephemeral port X
2) socket B: explicitly bind() to port X
3) check that port X is now excluded from ephemeral ports
4) close socket B to release the port bind
5) socket C: connect() from ephemeral port X
As well as a corner case to test that the connect-bind flag is cleared:
1) connect() from ephemeral port X
2) disconnect the socket with connect(AF_UNSPEC)
3) bind() it explicitly to port X
4) check that port X is now excluded from ephemeral ports
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20250917-update-bind-bucket-state-on-unhash-v5-2-57168b661b47@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e10 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftest for the IPv6 fragmentation regression which affected
several stable kernels.
Commit a18dfa9925 ("ipv6: save dontfrag in cork") was backported to
stable without some prerequisite commits. This caused a regression when
sending IPv6 UDP packets by preventing fragmentation and instead
returning -1 (EMSGSIZE).
Add selftest to check for this issue by attempting to send a packet
larger than the interface MTU. The packet will be fragmented on a
working kernel, with sendmsg(2) correctly returning the expected number
of bytes sent. When the regression is present, sendmsg returns -1 and
sets errno to EMSGSIZE.
Link: https://lore.kernel.org/stable/aElivdUXqd1OqgMY@karahi.gladserv.com
Signed-off-by: Brett A C Sheffield <bacs@librecast.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250903154925.13481-1-bacs@librecast.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 9bb88c6596 ("selftests: net: test extacks in netlink dumps")
moved netlink-dumps from TEST_GEN_PROGS to YNL_GEN_FILES.
But _FILES are not for tests, rather for utilities / helpers.
Create YNL_GEN_PROGS and include netlink-dumps there.
This makes netlink-dumps part of executed tests, again.
Link: https://patch.msgid.link/20250906211351.3192412-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
