KASAN reports a global-out-of-bounds access when running these nfit
tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh,
daxdev-errors.sh, and inject-error.sh.
[] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test]
[] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215
[] The buggy address belongs to the variable:
[] handle+0x1c/0x1df4 [nfit_test]
nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device
handle and triggers a KASAN error when it reads past the end of the
handle array. It should not be indexing the handle array at all.
The correct device handle is stored in per-DIMM test data. Each DIMM
has a struct nfit_mem that embeds a struct acpi_nfit_memdev that
describes the NFIT device handle. Use that device handle here.
Fixes: 10246dc84d ("acpi nfit: nfit_test supports translate SPA")
Cc: stable@vger.kernel.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
devm_kcalloc() may fail. ndtest_probe() allocates three DMA address
arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses
them in ndtest_nvdimm_init(), which can lead to a NULL pointer
dereference under low-memory conditions.
Check all three allocations and return -ENOMEM if any allocation fails,
jumping to the common error path. Do not emit an extra error message
since the allocator already warns on allocation failure.
Fixes: 9399ab61ad ("ndtest: Add dimms to the two buses")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/c04bfc941a9f5d249b049572c1ae122fe551ee5d.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
papr_scm and ndtest share common PDSM payload structs like
nd_papr_pdsm_health. Presently these structs are duplicated across
papr_pdsm.h and ndtest.h header files. Since 'ndtest' is essentially
arch independent and can run on platforms other than PPC64, a way
needs to be deviced to avoid redundancy and duplication of PDSM
structs in future.
So the patch proposes moving the PDSM header from arch/powerpc/include-
-/uapi/ to the generic include/uapi/linux directory. Also, there
are some #defines common between papr_scm and ndtest which are not
exported to the user space. So, move them to a header file which
can be shared across ndtest and papr_scm via newly introduced
include/linux/papr_scm.h.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/170638176942.112443.2937254675538057083.stgit@ltcd48-lp2.aus.stglab.ibm.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Prevent warnings of the form:
tools/testing/nvdimm/config_check.c:4:6: error: no previous prototype
for ‘check’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851f ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/nvdimm/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543984331.460832.1780246477583036191.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The nvdimm test wraps a number of API functions, but these functions
don't have a prototype in a header because they are all called
by a different name:
drivers/nvdimm/../../tools/testing/nvdimm/test/iomap.c:74:15: error: no previous prototype for '__wrap_devm_ioremap' [-Werror=missing-prototypes]
74 | void __iomem *__wrap_devm_ioremap(struct device *dev,
| ^~~~~~~~~~~~~~~~~~~
drivers/nvdimm/../../tools/testing/nvdimm/test/iomap.c:86:7: error: no previous prototype for '__wrap_devm_memremap' [-Werror=missing-prototypes]
86 | void *__wrap_devm_memremap(struct device *dev, resource_size_t offset,
| ^~~~~~~~~~~~~~~~~~~~
...
Add prototypes to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230516201415.556858-2-arnd@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
ACPICA commit 44f1af0664599e87bebc3a1260692baa27b2f264
Similar to "Replace one-element array with flexible-array", replace the
1-element array with a proper flexible array member as defined by C99.
This allows the code to operate without tripping compile-time and run-
time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds,
and/or -fstrict-flex-arrays=3).
The sizeof() uses with struct acpi_nfit_flush_address and struct
acpi_nfit_smbios have been adjusted to drop the open-coded subtraction
of the trailing single element. The result is no binary differences in
.text nor .data sections.
Link: https://github.com/acpica/acpica/commit/44f1af06
Signed-off-by: Bob Moore <robert.moore@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.
The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With the nd_namespace_blk and nd_blk_region infrastructures being removed,
the ndtest still has some references to the old code. So the
compilation fails as below,
../tools/testing/nvdimm/test/ndtest.c:204:25: error: ‘ND_DEVICE_NAMESPACE_BLK’ undeclared here (not in a function); did you mean ‘ND_DEVICE_NAMESPACE_IO’?
204 | .type = ND_DEVICE_NAMESPACE_BLK,
| ^~~~~~~~~~~~~~~~~~~~~~~
| ND_DEVICE_NAMESPACE_IO
../tools/testing/nvdimm/test/ndtest.c: In function ‘ndtest_create_region’:
../tools/testing/nvdimm/test/ndtest.c:630:17: error: ‘ndbr_desc’ undeclared (first use in this function); did you mean ‘ndr_desc’?
630 | ndbr_desc.enable = ndtest_blk_region_enable;
| ^~~~~~~~~
| ndr_desc
../tools/testing/nvdimm/test/ndtest.c:630:17: note: each undeclared identifier is reported only once for each function it appears in
../tools/testing/nvdimm/test/ndtest.c:630:36: error: ‘ndtest_blk_region_enable’ undeclared (first use in this function)
630 | ndbr_desc.enable = ndtest_blk_region_enable;
| ^~~~~~~~~~~~~~~~~~~~~~~~
../tools/testing/nvdimm/test/ndtest.c:631:35: error: ‘ndtest_blk_do_io’ undeclared (first use in this function); did you mean ‘ndtest_blk_mmio’?
631 | ndbr_desc.do_io = ndtest_blk_do_io;
| ^~~~~~~~~~~~~~~~
| ndtest_blk_mmio
The current patch removes the specific code to cleanup all obsolete
references.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://lore.kernel.org/r/165763940218.3501174.7103619358744815702.stgit@ltc-boston123.aus.stglabs.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Starting with the new perf-event support in the nvdimm core, the
nfit_test mock module stops compiling. Rename its security_init() to
nfit_security_init().
tools/testing/nvdimm/test/nfit.c:1845:13: error: conflicting types for ‘security_init’; have ‘void(struct nfit_test *)’
1845 | static void security_init(struct nfit_test *t)
| ^~~~~~~~~~~~~
In file included from ./include/linux/perf_event.h:61,
from ./include/linux/nd.h:11,
from ./drivers/nvdimm/nd-core.h:11,
from tools/testing/nvdimm/test/nfit.c:19:
Fixes: 9a61d0838c ("drivers/nvdimm: Add nvdimm pmu structure")
Cc: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/164904238610.1330275.1889212115373993727.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
