Instead of using zalloc(nr_entries * sizeof_entry) that is what calloc()
does.
In some places where linux/zalloc.h isn't needed, remove it, add when
needed and was getting it indirectly.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The index into the cpumap array and the number of entries within the
array can never be negative, so let's make them unsigned. This is
prompted by reports that gcc 13 with -O6 is giving a
alloc-size-larger-than errors. The change makes the cpumap changes and
then updates the declaration of index variables throughout perf and
libperf to be unsigned. The two things are hard to separate as
compiler warnings about mixing signed and unsigned types breaks the
build.
Reported-by: Chingbin Li <liqb365@163.com>
Closes: https://lore.kernel.org/lkml/20260212025127.841090-1-liqb365@163.com/
Tested-by: Chingbin Li <liqb365@163.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
These #defines have been removed from the kernel headers in favour of
the string based PMU format attributes. Usages were previously removed
from the recording side of cs-etm in Perf. Finish the removal by
removing usages from the decode side too.
It's a straight replacement of the old #defines with the new register
bit definitions. Except cs_etm__setup_timeless_decoding() which wasn't
looking at the saved metadata and was instead hard coding an access to
'attr.config'. This was vulnerable to the same issue of .config being
moved to .config2 etc that the original removal of ETM_OPT_* tried to
fix. So fix that too.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking up the changes from these csets:
2153b2e891 ("sparc: Add architecture support for clone3")
99d2592023 ("rseq: Implement sys_rseq_slice_yield()")
4ac286c4a8 ("s390/syscalls: Switch to generic system call table generation")
This makes 'perf trace' support it, now its possible, for instance, to
do:
# perf trace -e rseq_slice_yield --max-stack=16
Here is an example with the 'sendmmsg' syscall:
root@x1:~# perf trace -e sendmmsg --max-stack 16 --max-events=1
0.000 ( 0.062 ms): dbus-broker/1012 sendmmsg(fd: 150, mmsg: 0x7ffef57cca50, vlen: 1, flags: DONTWAIT|NOSIGNAL) = 1
syscall_exit_to_user_mode_prepare ([kernel.kallsyms])
syscall_exit_to_user_mode_prepare ([kernel.kallsyms])
syscall_exit_to_user_mode ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64 ([kernel.kallsyms])
[0x117ce7] (/usr/lib64/libc.so.6 (deleted))
root@x1:~#
To do a system wide tracing of the new 'rseq_slice_yield' syscall with a
backtrace of at most 16 entries.
This addresses these perf tools build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/scripts/syscall.tbl scripts/syscall.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
diff -u tools/perf/arch/arm/entry/syscalls/syscall.tbl arch/arm/tools/syscall.tbl
diff -u tools/perf/arch/sh/entry/syscalls/syscall.tbl arch/sh/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/sparc/entry/syscalls/syscall.tbl arch/sparc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/xtensa/entry/syscalls/syscall.tbl arch/xtensa/kernel/syscalls/syscall.tbl
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, some architecture-specific perf-regs functions, such as
arch__intr_reg_mask() and arch__user_reg_mask(), are defined with the
__weak attribute.
This approach ensures that only functions matching the architecture of
the build/run host are compiled and executed, reducing build time and
binary size.
However, this __weak attribute restricts these functions to be called
only on the same architecture, preventing cross-architecture
functionality.
For example, a perf.data file captured on x86 cannot be parsed on an ARM
platform.
To address this limitation, this patch removes the __weak attribute from
these perf-regs functions.
The architecture-specific code is moved from the arch/ directory to the
util/perf-regs-arch/ directory.
The appropriate architectural functions are then called based on the
EM_HOST.
No functional changes are intended.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xudong Hao <xudong.hao@intel.com>
Cc: Zide Chen <zide.chen@intel.com>
[ Fixed up somme fuzz with s390 and riscv Build files wrt removing perf_regs.o ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up changes from:
b36d4b6aa8 ("arch: hookup listns() system call")
This should be used to beautify the syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/scripts/syscall.tbl scripts/syscall.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
diff -u tools/perf/arch/arm/entry/syscalls/syscall.tbl arch/arm/tools/syscall.tbl
diff -u tools/perf/arch/sh/entry/syscalls/syscall.tbl arch/sh/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/sparc/entry/syscalls/syscall.tbl arch/sparc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/xtensa/entry/syscalls/syscall.tbl arch/xtensa/kernel/syscalls/syscall.tbl
Please see tools/include/uapi/README.
Note that s390 syscall table is still out of sync as it switches to use the
generic table. But I'd like to minimize the change in this commit.
Cc: linux-arch@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
errno.h isn't used in auxtrace.h so remove it and fix build failures
caused by transitive dependencies through auxtrace.h on errno.h.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The NO_AUXTRACE build option was used when the __get_cpuid feature
test failed or if it was provided on the command line. The option no
longer avoids a dependency on a library and so having the option is
just adding complexity to the code base. Remove the option
CONFIG_AUXTRACE from Build files and HAVE_AUXTRACE_SUPPORT by assuming
it is always defined.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in:
c4a16820d9 fs: add open_tree_attr()
2df1ad0d25 x86/arch_prctl: Simplify sys_arch_prctl()
e632bca07c arm64: generate 64-bit syscall.tbl
This is basically to support the new open_tree_attr syscall. But it
also needs to update asm-generic unistd.h header to get the new syscall
number. And arm64 unistd.h header was converted to use the generic
64-bit header.
Addressing this perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/scripts/syscall.tbl scripts/syscall.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
diff -u tools/perf/arch/arm/entry/syscalls/syscall.tbl arch/arm/tools/syscall.tbl
diff -u tools/perf/arch/sh/entry/syscalls/syscall.tbl arch/sh/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/sparc/entry/syscalls/syscall.tbl arch/sparc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/xtensa/entry/syscalls/syscall.tbl arch/xtensa/kernel/syscalls/syscall.tbl
diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Please see tools/include/uapi/README for further details.
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20250410001125.391820-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The definition of "static const char *const syscalltbl[] = {" is done
in a generated syscalls_32.h or syscalls_64.h that is architecture
dependent. In order to include the appropriate file a syscall_table.h
is found via the perf include path and it includes the syscalls_32.h
or syscalls_64.h as appropriate.
To support having multiple syscall tables, one for 32-bit and one for
64-bit, or for different architectures, an include path cannot be
used. Remove syscall_table.h because of this and inline what it does
into syscalltbl.c.
For architectures without a syscall_table.h this will cause a failure
to include either syscalls_32.h or syscalls_64.h rather than a failure
to include syscall_table.h. For architectures that only included one
or other, the behavior matches BITS_PER_LONG as previously done on
architectures supporting both syscalls_32.h and syscalls_64.h.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
