On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
Linux supports NXP's LMM SCMI protocol so switch to using the appropriate
API. The SIPs were intended to act as placeholders until the support for
said protocol was upstreamed.
The underlying CPU protocol command from IMX_SIP_SRC_M_RESET_ADDR_SET is
replaced by a LMM protocol command with the same effect (i.e. setting the
boot address) since using the CPU protocol would require additional
permissions (which TF-A already had). Apart from this, the SIPs are
replaced by their equivalent Linux LMM commands.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20251114143503.2139-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
User space (alsa-lib) uses the PCM device name to detect HDMI devices, the
name is expected to be in form of 'HDMI'+<space>+number.
The PCM device name is not configured in ASoC, only the PCM id is set based
on the loaded topology.
Detect the HDMI PCM playback devices and configure the name to help user
space to handle HDMI PCMs correctly.
aplay -l | grep HDMI (Audio capable monitor connected)
Before the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) []
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) []
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) []
after the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) [DELL P1917S]
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) [HDMI 2]
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) [HDMI 3]
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251029105134.1342-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function topology feature, and the plat_data->machine field that
specifies this feature, is ACPI specific. The check didn't take this
into consideration, which causes a NULL pointer dereference splat on
OF platforms:
BUG: KASAN: null-ptr-deref in sof_create_ipc_file_profile (sound/soc/sof/fw-file-profile.c:291 sound/soc/sof/fw-file-profile.c:340) snd_sof
Read of size 8 at addr 00000000000000c8 by task (udev-worker)/247
CPU: 7 UID: 0 PID: 247 Comm: (udev-worker) Not tainted 6.18.0-rc2-next-20251023-03804-g93b191bc0c26-dirty #747 PREEMPT ba3c303a11d89508de4087cb5b4f8985b6d87b6f
Hardware name: Google Ciri sku2 board (DT)
Call trace:
[KASAN stuff]
sof_create_ipc_file_profile (sound/soc/sof/fw-file-profile.c:291 sound/soc/sof/fw-file-profile.c:340) snd_sof
snd_sof_device_probe (sound/soc/sof/core.c:304 sound/soc/sof/core.c:388 sound/soc/sof/core.c:460 sound/soc/sof/core.c:719) snd_sof
sof_of_probe (sound/soc/sof/sof-of-dev.c:84) snd_sof_of
platform_probe (drivers/base/platform.c:1405)
[...]
Check that the ACPI specific field is actually valid before accessing
it.
This was seen on a MediaTek based Chromebook.
Fixes: 2b92b98cc4 ("ASoC: SOF: Don't print the monolithic topology name if function topology may be used")
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251023061226.1127345-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi
Bard Liao
Linus Torvalds
Takashi Iwai
HariKrishna Sagala
Laurentiu Mihalcea
Kuninori Morimoto
Chen-Yu Tsai
Shuming Fan