The pcm_id value is __le32 so convert it before passing to the dev_dbg
function to be printed. Also fixup some other uses of __le32 data and
a couple of places where %u should have been used instead of %d
Picked up by sparse prototype for variadic and printf
function checking. Fixes a large number of sparse warnings, such as:
sound/soc/sof/pcm.c:84:25: warning: incorrect type in argument 4 (different base types)
sound/soc/sof/pcm.c:84:25: expected unsigned int
sound/soc/sof/pcm.c:84:25: got restricted __le32 [usertype] pcm_id
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260324133403.107708-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87fr60jypf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pcm_id value is __le32 so convert it before passing to the dev_dbg
function to be printed. Also fixup some other uses of __le32 data and
a couple of places where %u should have been used instead of %d
Picked up by sparse prototype for variadic and printf
function checking. Fixes a large number of sparse warnings, such as:
sound/soc/sof/pcm.c:84:25: warning: incorrect type in argument 4 (different base types)
sound/soc/sof/pcm.c:84:25: expected unsigned int
sound/soc/sof/pcm.c:84:25: got restricted __le32 [usertype] pcm_id
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260310125106.178944-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
User space (alsa-lib) uses the PCM device name to detect HDMI devices, the
name is expected to be in form of 'HDMI'+<space>+number.
The PCM device name is not configured in ASoC, only the PCM id is set based
on the loaded topology.
Detect the HDMI PCM playback devices and configure the name to help user
space to handle HDMI PCMs correctly.
aplay -l | grep HDMI (Audio capable monitor connected)
Before the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) []
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) []
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) []
after the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) [DELL P1917S]
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) [HDMI 2]
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) [HDMI 3]
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251029105134.1342-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions.
