We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875x6wldde.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
We have very similar name functions (A)(B). Both gets component from
snd_kcontrol, but (A) is used in callback functions which is registered
through snd_soc_add_component_controls(), (B) is used through
snd_soc_dapm_new_widgets().
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(B) is using very picky way to get component but using it is necessary in
ASoC. But (A) is just wrapper function to snd_kcontrol_chip(), and directly
using it without wrapper is very common way on ALSA.
To reduce confusions of similar function, let's use common way on (A).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sefmt8rv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions.
Merge series from Andrei Simion <andrei.simion@microchip.com>:
This patch set includes two updates for the MCHP SPDIF RX and TX drivers.
The patches remove the interface name from the stream_name, allowing the
interface name and index to be set in the Device Tree (DT) using the
sound-name-prefix string property.
Remove the interface name from the stream_name. The interface name (and the
index of the interface) can be set in DT using the sound-name-prefix string
property.
[andrei.simion@microchip.com: Adjust the commit title.]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240916091056.11910-3-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the interface name from the stream_name. The interface name (and the
index of the interface) can be set in DT using the sound-name-prefix string
property.
[andrei.simion@microchip.com: Adjust the commit title.]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240916091056.11910-2-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop S24_LE format because it is not supported if more than 2 channels
(of TDM slots) are used. This limitation makes it impractical for use cases
requiring more than 2 TDM slots, leading to potential issues in
multi-channel configurations.
[andrei.simion@microchip.com: Reword the commit title and the commit
message. Add code comment to explain the removed code.]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/20240916131910.22680-3-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid removing these controls, as doing so can cause issues if the stream
is initiated from another control. Ensure these controls remain intact when
the stream is started or finished. Instead of removing them, return an
-EBUSY error code to indicate that the controller is busy, especially when
the audio filter and the SINC filter are in use.
[andrei.simion@microchip.com: Reword the commit title and the commit
message. Replace spinlock and busy variable with atomic_t busy_stream.]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240913120621.79088-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve the DMA descriptor calculation by dividing the period size by the
product of sample size and DMA chunk size, rather than just DMA chunk size.
Ensure that all DMA descriptors start from a well-aligned address to
improve the reliability and efficiency of DMA operations and avoid
potential issues related to misaligned descriptors.
[andrei.simion@microchip.com: Adjust the commit title. Reword the commit
message. Add MACROS for each DMA size chunk supported by mchp-pdmc.
Add DMA_BURST_ALIGNED preprocesor function to check the alignment of the
DMA burst.]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240911122909.133399-2-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The period size represents the size of the DMA descriptor. To ensure all
DMA descriptors start from a well-aligned address, the period size must
be divided by (sample size * maxburst), not just by maxburst.
This adjustment allows for computing a higher maxburst value, thereby
increasing the performance of the DMA transfer.
Previously, snd_pcm_lib_period_bytes() returned 0 because the runtime HW
parameters are computed after the hw_params() callbacks are used.
To address this, we now use params_*() functions to compute the period
size accurately. This change optimizes the DMA transfer performance by
ensuring proper alignment and efficient use of maxburst values.
[andrei.simion@microchip.com: Reword commit message and commit title.
Add macros with values for maximum DMA chunk size allowed.
Add DMA_BURST_ALIGNED preprocessor function to check the alignment of the
DMA burst]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240905095633.113784-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
:~$ speaker-test -t sine
speaker-test 1.2.6
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0
[CLASSD PCM snd-soc-dummy-dai-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 2f650f87c0 ("ASoC: atmel: remove unnecessary dai_link->platform")
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240604101030.237792-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Takashi Iwai <tiwai@suse.de>:
This is a series of trivial cleanup patches for ASoC to correct
the *-objs suffix in Makefile. The other ALSA code has been covered
by a previous patch set
https://lore.kernel.org/r/20240507135513.14919-1-tiwai@suse.de
As was suggested in a patch review, *-objs suffix in Makefile is
basically a wrong use nowadays for kernel driver modules.
They should be replaced with *-y suffix instead.
This is a result of systematic conversions, separated per directory.
Only lightly compile-tested.