The pending irq work might be still floating while the assigned stream
has been already closed, which may lead to UAF, especially when
another async work for fasync is involved.
For addressing this, extend the hda_controller_ops for allowing the
extra cleanup procedure that is specific to the controller driver, and
make sure to cancel and sync the pending irq work at each PCM close
before releasing the resources.
Reported-by: Jake Lamberson <lamberson.jake@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-2-tiwai@suse.de
Currently, the delayed IRQ handling for PCM streams is managed in a
single work embedded in hda_intel, but this is basically a per-stream
thing. Due to the single work, we can't cancel the work properly at
closing each stream, for example.
For making the IRQ pending work to be stream-based, this patch changes
the following:
- An extended version of azx_dev (i.e. the hd-audio stream object) is
defined for snd-hda-intel
- The irq_pending flag and irq_pending_work are moved to
hda_intel_stream, so that they can be hda-intel stream specific
- The stream creation and assignment are refactored so that
snd-hda-intel can handle individually;
the snd-hda-intel specific workaround for stream tags is also moved
to snd-hda-intel itself instead of the common code
- The irq pending work is canceled properly at free / shutdown
While we're at it, changed the bit field flag to bool, as the bit
field doesn't help much in our case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-1-tiwai@suse.de
snd_hda_ctl_add() dereferences kctl->id.subdevice without checking
whether kctl is NULL. Multiple callers in sound/hda/codecs/ca0132.c
pass the return value of snd_ctl_new1() directly to snd_hda_ctl_add()
without a NULL check:
return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
snd_ctl_new1() returns NULL when the underlying snd_ctl_new() fails
on memory allocation (kzalloc_flex),which can occur under memory
pressure or via fault injection.
Add a NULL check at the entry of snd_hda_ctl_add(), matching the
pattern already used by snd_ctl_add_replace() at the same call
path (sound/core/control.c:515). Return -EINVAL to let callers
handle the error gracefully.
Fixes: 44f0c9782c ("ALSA: hda/ca0132: Add tuning controls")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Link: https://patch.msgid.link/20260514132245.3062884-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hda-intel driver uses request_firmware_nowait() for loading its
patch, and tries to continue the probe directly from the fw loader
callback. This works in principle, but it has a few drawbacks:
- The driver may be released before the firmware callback completes
- Having two ways of async probe makes the code flow unnecessarily
complex
The former issue is more severe, as it may potentially lead to a UAF,
and there is no explicit way to cancel the pending firmware worker
for now.
This patch changes the firmware loading to be performed rather in the
common probe work without *_nowait(). Then the pending work can be
easily canceled, and the code becomes more straightforward.
A nice bonus is that, by moving into the probe work, the firmware
doesn't need any longer to be cached, hence we can get rid of struct
azx.fw field, and release the firmware immediately after parsing it,
too.
Fixes: 5cb543dba9 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
Link: https://patch.msgid.link/20260415135526.1813126-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We used snd_hda_codec_read() for the verb write when a synchronization
is needed after the write, e.g. for the power state toggle or such
cases. It works in principle, but it looks rather confusing and too
hackish.
For improving the code readability, introduce a new helper function,
snd_hda_codec_write_sync(), which is another variant of
snd_hda_codec_write(), and replace the existing snd_hda_codec_read()
calls with this one.
No behavior change but just the code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260409093826.1317626-2-tiwai@suse.de
The "IEC958 Default PCM Playback Switch" control is backed directly by
mout->share_spdif. The share-switch callbacks currently access that state
without serialization, and spdif_share_sw_put() always returns 0, so
normal userspace writes never emit the standard ALSA control value
notification.
snd_hda_multi_out_analog_open() may also clear mout->share_spdif when the
analog PCM capabilities and the SPDIF capabilities no longer intersect.
That fallback is still needed to avoid creating an impossible hw
constraint set, but it changes the mixer backing value without notifying
subscribers.
Protect the share-switch callbacks with spdif_mutex like the other SPDIF
control handlers, return the actual change value from spdif_share_sw_put(),
and notify the cached control when the open path forcibly disables
shared SPDIF mode after dropping spdif_mutex.
This keeps the existing auto-disable behavior while making switch state
changes visible to userspace.
Fixes: 9a08160bdb ("[ALSA] hda-codec - Add "IEC958 Default PCM" switch")
Fixes: 022b466fc3 ("ALSA: hda - Avoid invalid formats and rates with shared SPDIF")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260403-hda-spdif-share-notify-v3-1-4eb1356b0f17@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
print_gpio() prints the GPIO capability header and the bidirectional
GPIO state, but it never reports the separate GPI and GPO pins even
though AC_PAR_GPIO_CAP exposes their counts.
The HD-audio specification defines dedicated GPI and GPO verbs
alongside the GPIO ones, so codecs with input-only or output-only
general-purpose pins currently lose that state from
/proc/asound/card*/codec#* altogether.
Add the missing read verb definitions and extend print_gpio() to dump
the GPI and GPO pins, too, while leaving the existing IO[] output
unchanged.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260328-hda-proc-gpi-gpo-v1-1-fabb36564bee@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Use the correct function names and add a function parameter description
to avoid kernel-doc warnings:
hda_jack.h:97: warning: Function parameter or struct member 'cb' not
described in 'snd_hda_jack_detect_enable_callback'
hda_jack.h:97: warning: expecting prototype for snd_hda_jack_detect_enable().
Prototype was for snd_hda_jack_detect_enable_callback() instead
hda_local.h:441: warning: expecting prototype for _snd_hda_set_pin_ctl().
Prototype was for snd_hda_set_pin_ctl() instead
Fixes: cdd03cedc5 ("ALSA: hda - Introduce snd_hda_set_pin_ctl*() helper functions")
Fixes: 5204a05d70 ("ALSA: hda - Add DP-MST jack support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260106185951.2179242-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We used to have a variable declaration with __free() initialized with
NULL. This was to keep the old coding style rule, but recently it's
relaxed and rather recommends to follow the new rule to declare in
place of use for __free() -- which avoids potential deadlocks or UAFs
with nested cleanups.
Although the current code has no bug, per se, let's follow the new
standard and move the declaration to the place of assignment (or
directly assign the allocated result) instead of NULL initializations.
Fixes: ee0b0f5d32 ("ALSA: hda/generic: Use auto cleanup for temporary buffers")
Fixes: 03c5c350e3 ("ALSA: hda/realtek: Add support for new HP G12 laptops")
Fixes: b0550d4c2d ("ALSA: hda/common: Use auto cleanup for temporary buffers")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251216140634.171890-10-tiwai@suse.de
The new macro CLASS(snd_hda_power_pm) can replace the manual
snd_hda_power_up_pm() and _down() calls gracefully.
A part of the code in codec_exec_verb() is factored out to a function,
so that the auto-cleanup can be well scoped.
Merely cleanups and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-6-tiwai@suse.de
Use 'unsigned int' instead of 'int' for the local variable 'devlist_len'
because snd_hda_get_devices() returns an 'unsigned int' and the length
cannot be negative. Update the print format specifier and the if
condition accordingly.
Reformat calling snd_hda_codec_read() to fit in a single line while
we're at it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250813210059.215912-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use min() to simplify snd_hda_get_devices() and improve its readability.
Change the function parameter 'max_devices' from 'int' to 'unsigned int'
to avoid a min() signedness error. Update all related local variables
and the function's return type to 'unsigned int' accordingly.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250813205507.215658-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai
Quan SunandTakashi Iwai
Cássio GabrielandTakashi Iwai
Linus Torvalds
Kees Cook
Randy DunlapandTakashi Iwai
Thorsten BlumandTakashi Iwai