onyx_prepare() accepts 32/44.1/48 kHz PCM playback, but it leaves the
Onyx IEC958 sample-rate status bits at the driver's initial 44.1 kHz
setting in DIG_INFO3. As a result, 32 kHz and 48 kHz PCM streams
advertise a stale IEC958 sample rate unless userspace rewrites IEC958
Playback Default first.
Update only the consumer sample-frequency bits in DIG_INFO3 from the PCM
runtime during prepare, resolving the long-standing FIXME in the PCM
playback path while leaving the other user-controlled IEC958 status bits
unchanged.
Mark IEC958 Playback Default as volatile as well, since prepare() now
changes the exposed register contents outside the control put callback.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260403-onyx-spdif-pcm-rate-v1-1-dcfaf931cf83@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The i2sbus PCM code uses pi->active to constrain the sibling stream to
an already prepared duplex format and rate in i2sbus_pcm_open().
That state is set from i2sbus_pcm_prepare(), but the current code only
clears it on close. As a result, the sibling stream can inherit stale
constraints after the prepared state has been torn down.
Clear pi->active when hw_params() or hw_free() tears down the prepared
state, and set it again only after prepare succeeds.
Replace the stale FIXME in the duplex constraint comment with a description
of the current driver behavior: i2sbus still programs a single shared
transport configuration for both directions, so mixed formats are not
supported in duplex mode.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604010125.AvkWBYKI-lkp@intel.com/
Fixes: f3d9478b2c ("[ALSA] snd-aoa: add snd-aoa")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260331-aoa-i2sbus-clear-stale-active-v2-1-3764ae2889a1@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
i2sbus_add_dev() keeps the matched "sound" child pointer after
for_each_child_of_node() has dropped the iterator reference. Take an
extra reference before saving that node and drop it after the
layout-id/device-id lookup is complete.
The function also stores np in dev->sound.ofdev.dev.of_node without
taking a reference for the embedded soundbus device. Since i2sbus
overrides the embedded platform device release callback, balance that
reference explicitly in the local error path and in i2sbus_release_dev().
Fixes: f3d9478b2c ("[ALSA] snd-aoa: add snd-aoa")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260330-aoa-i2sbus-ofnode-lifetime-v1-1-51c309f4ff06@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In i2sbus_resume(), skip devices with an empty codec list, which avoids
using an uninitialized 'sysclock_factor' in the 32-bit format path in
i2sbus_pcm_prepare().
In i2sbus_pcm_prepare(), replace two list_for_each_entry() loops with a
single list_first_entry() now that the codec list is guaranteed to be
non-empty by all callers.
Fixes: f3d9478b2c ("[ALSA] snd-aoa: add snd-aoa")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260310102921.210109-3-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'struct codec_connection' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
10034 3392 12 13438 347e sound/aoa/fabrics/layout.o
After:
=====
text data bss dec hex filename
10370 3040 12 13422 346e sound/aoa/fabrics/layout.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/4009c337cc1a1a57795562279270c03687973b3b.1772138640.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The size parameter of strscpy() is optional if the destination buffer
has a fixed length and strscpy() can automatically determine its size
using sizeof(). This makes many explicit size arguments redundant.
Remove them to shorten and simplify the code.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We shouldn't split a quoted string, as it worsens the grep-ability.
Put back to the single line, which also makes checkpatch.pl happier.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430121028.30443-1-wsa+renesas@sang-engineering.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v6.9
A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.
clang warns about what it interprets as a truncated snprintf:
sound/aoa/soundbus/i2sbus/core.c:171:6: error: 'snprintf' will always be truncated; specified size is 6, but format string expands to at least 7 [-Werror,-Wformat-truncation-non-kprintf]
The actual problem here is that it does not understand the special
%pOFn format string and assumes that it is a pointer followed by
the string "OFn", which would indeed not fit.
Slightly increasing the size of the buffer to its natural alignment
avoids the warning, as it is now long enough for the correct and
the incorrect interprations.
Fixes: b917d58dcf ("ALSA: aoa: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-ID: <20240326223825.4084412-9-arnd@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull powerpc updates from Michael Ellerman:
- Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use
by glibc
- Add support for recognising the Power11 architected and raw PVRs
- Add support for nr_cpus=n on the command line where the
boot CPU is >= n
- Add ppcxx_allmodconfig targets for all 32-bit sub-arches
- Other small features, cleanups and fixes
Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff
Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan,
Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor,
Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B.
Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe
Kleine-König, Vaibhav Jain, and Wen Xiong.
* tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits)
powerpc/macio: Make remove callback of macio driver void returned
powerpc/83xx: Fix build failure with FPU=n
powerpc/64s: Fix get_hugepd_cache_index() build failure
powerpc/4xx: Fix warp_gpio_leds build failure
powerpc/amigaone: Make several functions static
powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
macintosh/adb: make adb_dev_class constant
powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
powerpc/fsl: Fix mfpmr() asm constraint error
powerpc: Remove cpu-as-y completely
powerpc/fsl: Modernise mt/mfpmr
powerpc/fsl: Fix mfpmr build errors with newer binutils
powerpc/64s: Use .machine power4 around dcbt
powerpc/64s: Move dcbt/dcbtst sequence into a macro
powerpc/mm: Code cleanup for __hash_page_thp
powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
powerpc/irq: Allow softirq to hardirq stack transition
powerpc: Stop using of_root
powerpc/machdep: Define 'compatibles' property in ppc_md and use it
of: Reimplement of_machine_is_compatible() using of_machine_compatible_match()
...