mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
master
1052
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  Fernando Fernandez ManceraandJakub Kicinski
|
072aa0f5c3 |
Revert "ipv6: preserve insertion order for same-scope addresses"
Chris Adams reported that preserving insertion order for same-scope addresses is causing SSH connections to be dropped after stopping a VM while running NetworkManager. NetworkManager caches the IPv6 address configuration, when a RA arrives, it determines the list of addresses to configure and checks if the addresses are already in the right order in the kernel. If they aren't, NetworkManager removes and re-adds them to achieve the desired order. As the order changes, NetworkManager is confused and reconfigures the addresses on every update. In addition, this would also affect to cloud tooling that relies on IPv6 addresses order to identify primary and secondaries addresses. This reverts commit |
||
 Linus Torvalds
|
91a4855d6c |
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
||
 Paolo AbeniandJakub Kicinski
|
8e6405f821 |
ipv6: move IFA_F_PERMANENT percpu allocation in process scope
Observed at boot time:
CPU: 43 UID: 0 PID: 3595 Comm: (t-daemon) Not tainted 6.12.0 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
pcpu_alloc_noprof.cold+0x1f/0x4b
fib_nh_common_init+0x4c/0x110
fib6_nh_init+0x387/0x740
ip6_route_info_create+0x46d/0x640
addrconf_f6i_alloc+0x13b/0x180
addrconf_permanent_addr+0xd0/0x220
addrconf_notify+0x93/0x540
notifier_call_chain+0x5a/0xd0
__dev_notify_flags+0x5c/0xf0
dev_change_flags+0x54/0x70
do_setlink+0x36c/0xce0
rtnl_setlink+0x11f/0x1d0
rtnetlink_rcv_msg+0x142/0x3f0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x242/0x390
netlink_sendmsg+0x21b/0x470
__sys_sendto+0x1dc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x7d/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f5c3852f127
Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 85 ef 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44
RSP: 002b:00007ffe86caf4c8 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000556c5cd93210 RCX: 00007f5c3852f127
RDX: 0000000000000020 RSI: 0000556c5cd938b0 RDI: 0000000000000003
RBP: 00007ffe86caf5a0 R08: 00007ffe86caf4e0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000202 R12: 0000556c5cd932d0
R13: 00000000021d05d1 R14: 00000000021d05d1 R15: 0000000000000001
IFA_F_PERMANENT addresses require the allocation of a bunch of percpu
pointers, currently in atomic scope.
Similar to commit
|
||
 Alexei Starovoitov
|
891a05ccba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 7.0-rc6+
Cross-merge BPF and other fixes after downstream PR. Minor conflict in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Paolo AbeniandJakub Kicinski
|
fd63f18597 |
ipv6: prevent possible UaF in addrconf_permanent_addr()
The mentioned helper try to warn the user about an exceptional
condition, but the message is delivered too late, accessing the ipv6
after its possible deletion.
Reorder the statement to avoid the possible UaF; while at it, place the
warning outside the idev->lock as it needs no protection.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://sashiko.dev/#/patchset/8c8bfe2e1a324e501f0e15fef404a77443fd8caf.1774365668.git.pabeni%40redhat.com
Fixes:
|
||
 Eric BiggersandAlexei Starovoitov
|
a02327413a |
bpf: Remove inclusions of crypto/sha1.h
Since commit
|
||
 Kuniyuki IwashimaandJakub Kicinski
|
4be7b99c25 |
ipv6: Don't remove permanent routes with exceptions from tb6_gc_hlist.
The cited commit mechanically put fib6_remove_gc_list()
just after every fib6_clean_expires() call.
When a temporary route is promoted to a permanent route,
there may already be exception routes tied to it.
If fib6_remove_gc_list() removes the route from tb6_gc_hlist,
such exception routes will no longer be aged.
Let's replace fib6_remove_gc_list() with a new helper
fib6_may_remove_gc_list() and use fib6_age_exceptions() there.
Note that net->ipv6 is only compiled when CONFIG_IPV6 is
enabled, so fib6_{add,remove,may_remove}_gc_list() are guarded.
Fixes:
|
||
 Kees CookandLinus Torvalds
|
189f164e57 |
Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
32a92f8c89 |
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Eric BiggersandJakub Kicinski
|
5023479627 |
ipv6: Switch to higher-level SHA-1 functions
There's now a proper SHA-1 API that follows the usual conventions for hash function APIs: sha1_init(), sha1_update(), sha1_final(), sha1(). The only remaining user of the older low-level SHA-1 API, sha1_init_raw() and sha1_transform(), is ipv6_generate_stable_address(). I'd like to remove this older API, which is too low-level. Unfortunately, ipv6_generate_stable_address() does in fact skip the SHA-1 finalization for some reason. So the values it computes are not standard SHA-1 values, and it sort of does want the low-level API. Still, it's still possible to use the higher-level functions sha1_init() and sha1_update() to get the same result, provided that the resulting state is used directly, skipping sha1_final(). So, let's do that instead. This will allow removing the low-level API. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@kernel.org> Acked-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260123051656.396371-2-ebiggers@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
c27022497d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.19-rc6). No conflicts, or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kuniyuki IwashimaandJakub Kicinski
|
ddf96c393a |
ipv6: Fix use-after-free in inet6_addr_del().
syzbot reported use-after-free of inet6_ifaddr in
inet6_addr_del(). [0]
The cited commit accidentally moved ipv6_del_addr() for
mngtmpaddr before reading its ifp->flags for temporary
addresses in inet6_addr_del().
Let's move ipv6_del_addr() down to fix the UAF.
[0]:
BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117
Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593
CPU: 0 UID: 0 PID: 9593 Comm: syz.3.1618 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117
addrconf_del_ifaddr+0x11e/0x190 net/ipv6/addrconf.c:3181
inet6_ioctl+0x1e5/0x2b0 net/ipv6/af_inet6.c:582
sock_do_ioctl+0x118/0x280 net/socket.c:1254
sock_ioctl+0x227/0x6b0 net/socket.c:1375
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f164cf8f749
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f164de64038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f164d1e5fa0 RCX: 00007f164cf8f749
RDX: 0000200000000000 RSI: 0000000000008936 RDI: 0000000000000003
RBP: 00007f164d013f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f164d1e6038 R14: 00007f164d1e5fa0 R15: 00007ffde15c8288
</TASK>
Allocated by task 9593:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
poison_kmalloc_redzone mm/kasan/common.c:397 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:414
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
ipv6_add_addr+0x4e3/0x2010 net/ipv6/addrconf.c:1120
inet6_addr_add+0x256/0x9b0 net/ipv6/addrconf.c:3050
addrconf_add_ifaddr+0x1fc/0x450 net/ipv6/addrconf.c:3160
inet6_ioctl+0x103/0x2b0 net/ipv6/af_inet6.c:580
sock_do_ioctl+0x118/0x280 net/socket.c:1254
sock_ioctl+0x227/0x6b0 net/socket.c:1375
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6099:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:252 [inline]
__kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284
kasan_slab_free include/linux/kasan.h:234 [inline]
slab_free_hook mm/slub.c:2540 [inline]
slab_free_freelist_hook mm/slub.c:2569 [inline]
slab_free_bulk mm/slub.c:6696 [inline]
kmem_cache_free_bulk mm/slub.c:7383 [inline]
kmem_cache_free_bulk+0x2bf/0x680 mm/slub.c:7362
kfree_bulk include/linux/slab.h:830 [inline]
kvfree_rcu_bulk+0x1b7/0x1e0 mm/slab_common.c:1523
kvfree_rcu_drain_ready mm/slab_common.c:1728 [inline]
kfree_rcu_monitor+0x1d0/0x2f0 mm/slab_common.c:1801
process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3421
kthread+0x3c5/0x780 kernel/kthread.c:463
ret_from_fork+0x983/0xb10 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
Fixes:
|
||
 Yumei HuangandJakub Kicinski
|
cb3de96eea |
ipv6: preserve insertion order for same-scope addresses
IPv6 addresses with the same scope are returned in reverse insertion
order, unlike IPv4. For example, when adding a -> b -> c, the list is
reported as c -> b -> a, while IPv4 preserves the original order.
This behavior causes:
a. When using `ip -6 a save` and `ip -6 a restore`, addresses are restored
in the opposite order from which they were saved. See example below
showing addresses added as 1::1, 1::2, 1::3 but displayed and saved
in reverse order.
# ip -6 a a 1::1 dev x
# ip -6 a a 1::2 dev x
# ip -6 a a 1::3 dev x
# ip -6 a s dev x
2: x: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
# ip -6 a save > dump
# ip -6 a d 1::1 dev x
# ip -6 a d 1::2 dev x
# ip -6 a d 1::3 dev x
# ip a d ::1 dev lo
# ip a restore < dump
# ip -6 a s dev x
2: x: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
# ip a showdump < dump
if1:
inet6 ::1/128 scope host proto kernel_lo
valid_lft forever preferred_lft forever
if2:
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
if2:
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
if2:
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
b. Addresses in pasta to appear in reversed order compared to host
addresses.
The ipv6 addresses were added in reverse order by commit
|
||
|
Jakub Kicinski
|
c7dc5b5228 |
ipv6: clean up routes when manually removing address with a lifetime
When an IPv6 address with a finite lifetime (configured with valid_lft and preferred_lft) is manually deleted, the kernel does not clean up the associated prefix route. This results in orphaned routes (marked "proto kernel") remaining in the routing table even after their corresponding address has been deleted. This is particularly problematic on networks using combination of SLAAC and bridges. 1. Machine comes up and performs RA on eth0. 2. User creates a bridge - does an ip -6 addr flush dev eth0; - adds the eth0 under the bridge. 3. SLAAC happens on br0. Even tho the address has "moved" to br0 there will still be a route pointing to eth0, but eth0 is not usable for IP any more. Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20251113031700.3736285-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Yue HaibingandJakub Kicinski
|
3d95261eeb |
ipv6: Add sanity checks on ipv6_devconf.rpl_seg_enabled
In ipv6_rpl_srh_rcv() we use min(net->ipv6.devconf_all->rpl_seg_enabled, idev->cnf.rpl_seg_enabled) is intended to return 0 when either value is zero, but if one of the values is negative it will in fact return non-zero. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://patch.msgid.link/20250901123726.1972881-3-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
8be4d31cb8 |
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
||
|
Linus Torvalds
|
13150742b0 |
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
||
 Gabriel GollerandJakub Kicinski
|
f24987ef69 |
ipv6: add force_forwarding sysctl to enable per-interface forwarding
It is currently impossible to enable ipv6 forwarding on a per-interface basis like in ipv4. To enable forwarding on an ipv6 interface we need to enable it on all interfaces and disable it on the other interfaces using a netfilter rule. This is especially cumbersome if you have lots of interfaces and only want to enable forwarding on a few. According to the sysctl docs [0] the `net.ipv6.conf.all.forwarding` enables forwarding for all interfaces, while the interface-specific `net.ipv6.conf.<interface>.forwarding` configures the interface Host/Router configuration. Introduce a new sysctl flag `force_forwarding`, which can be set on every interface. The ip6_forwarding function will then check if the global forwarding flag OR the force_forwarding flag is active and forward the packet. To preserve backwards-compatibility reset the flag (on all interfaces) to 0 if the net.ipv6.conf.all.forwarding flag is set to 0. Add a short selftest that checks if a packet gets forwarded with and without `force_forwarding`. [0]: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Gabriel Goller <g.goller@proxmox.com> Link: https://patch.msgid.link/20250722081847.132632-1-g.goller@proxmox.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Stanislav FomichevandJakub Kicinski
|
93893a57ef |
net: s/dev_get_flags/netif_get_flags/
Commit
|
||
|
Eric Biggers
|
9503ca2cca |
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
Rename the existing sha1_init() to sha1_init_raw(), since it conflicts with the upcoming library function. This will later be removed, but this keeps the kernel building for the introduction of the library. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250712232329.818226-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Jakub Kicinski
|
0cad34fb7c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2). No conflicts. Adjacent changes: drivers/net/wireless/mediatek/mt76/mt7925/mcu.c |
||
 Guillaume NaultandJakub Kicinski
|
4e914ef063 |
gre: Fix IPv6 multicast route creation.
Use addrconf_add_dev() instead of ipv6_find_idev() in addrconf_gre_config() so that we don't just get the inet6_dev, but also install the default ff00::/8 multicast route. Before commit |
||
|
Kuniyuki IwashimaandJakub Kicinski
|
7b6b53a76f |
ipv6: anycast: Don't use rtnl_dereference().
inet6_dev->ac_list is protected by inet6_dev->lock, so rtnl_dereference() is a bit rough annotation. As done in mcast.c, we can use ac_dereference() that checks if inet6_dev->lock is held. Let's replace rtnl_dereference() with a new helper ac_dereference(). Note that now addrconf_join_solict() / addrconf_leave_solict() in __ipv6_dev_ac_inc() / __ipv6_dev_ac_dec() does not need RTNL, so we can remove ASSERT_RTNL() there. Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250702230210.3115355-12-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kuniyuki IwashimaandJakub Kicinski
|
e01b193e0b |
ipv6: mcast: Use in6_dev_get() in ipv6_dev_mc_dec().
As well as __ipv6_dev_mc_inc(), all code in __ipv6_dev_mc_dec() are protected by inet6_dev->mc_lock, and RTNL is not needed. Let's use in6_dev_get() in ipv6_dev_mc_dec() and remove ASSERT_RTNL() in __ipv6_dev_mc_dec(). Now, we can remove the RTNL comment above addrconf_leave_solict() too. Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250702230210.3115355-6-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |