Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb51 ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert CAN raw socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of copy_to_user()
- For CAN_RAW_FILTER and CAN_RAW_XL_VCID_OPTS: on -ERANGE, set
opt->optlen to the required buffer size. The wrapper writes this
back to userspace even on error, preserving the existing API that
lets userspace discover the needed allocation size.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260408-getsockopt-v3-4-061bb9cb355d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
Fixes: 514ac99c64 ("can: fix multiple delivery of a single CAN frame for overlapping CAN filters")
Cc: stable@vger.kernel.org # v4.1+
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Link: https://patch.msgid.link/26ec626d-cae7-4418-9782-7198864d070c@bynar.io
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
[mkl: applied manually]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When routing CAN frames over different CAN interfaces the interface index
skb->iif is overwritten with every single hop. To prevent sending a CAN
frame back to its originating (first) incoming CAN interface another
ifindex variable is needed, which was stored in can_skb_priv::ifindex.
Move the can_skb_priv::ifindex content to can_skb_ext::can_iif.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-3-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.
This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers
The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 1a620a7238
and its follow-up fixes for the introduced dependency issues.
commit 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
commit cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure by default")
commit 6abd4577bc ("can: fix build dependency")
commit 5a5aff6338 ("can: fix build dependency")
The entire problem was caused by the requirement that a new network layer
feature needed to know about the protocol capabilities of the CAN devices.
Instead of accessing CAN device internal data structures which caused the
dependency problems a better approach has been developed which makes use of
CAN specific ml_priv data which is accessible from both sides.
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
For real CAN interfaces the CAN_CTRLMODE_FD and CAN_CTRLMODE_XL control
modes indicate whether an interface can handle those CAN FD/XL frames.
In the case a CAN XL interface is configured in CANXL-only mode with
disabled error-signalling neither CAN CC nor CAN FD frames can be sent.
The checks are performed on CAN_RAW sockets to give an instant feedback
to the user when writing unsupported CAN frames to the interface.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251126-canxl-v8-16-e7e3eb74f889@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As hinted in commit 501a90c945 ("inet: protect against too small mtu
values."), net_device->mtu is vulnerable to race conditions if it is
written and read without holding the RTNL.
At the moment, all the writes are done while the interface is down,
either in the devices' probe() function or in can_changelink(). So
there are no such issues yet. But upcoming changes will allow to
modify the MTU while the CAN XL devices are up.
In preparation to the introduction of CAN XL, annotate all the
net_device->mtu accesses which are not yet guarded by the RTNL with a
READ_ONCE().
Note that all the write accesses are already either guarded by the
RTNL or are already annotated and thus need no changes.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-can-fix-mtu-v3-1-581bde113f52@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
sock_queue_rcv_skb() can fail because of lack of memory resources: use
drop reasons and pass the receiving socket to the tracepoint, so that
it's possible to better locate/debug such events.
Tested with:
| # modprobe vcan echo=1
| # ip link add name vcan2 type vcan
| # ip link set dev vcan2 up
| # ./netlayer/tst-proc 1 &
| # bg
| # while true ; do perf record -e skb:kfree_skb -aR -- \
| > ./raw/tst-raw-sendto vcan2 ; perf script ; done
| [...]
| tst-raw-sendto 10942 [000] 506428.431856: skb:kfree_skb: skbaddr=0xffff97cec38b4200 rx_sk=0xffff97cf0f75a800 protocol=12 location=raw_rcv+0x20e reason: SOCKET_RCVBUF
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20250604160605.1005704-3-dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Avoid open coding initialization of sockcm fields.
Avoid reading the sk_priority field twice.
This ensures all callers, existing and future, will correctly try a
cmsg passed mark before sk_mark.
This patch extends support for cmsg mark to:
packet_spkt and packet_tpacket and net/can/raw.c.
This patch extends support for cmsg priority to:
packet_spkt and packet_tpacket.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last type of sockets which supports SOF_TIMESTAMPING_OPT_ID is RAW
sockets. To add new option this patch converts all callers (direct and
indirect) of _sock_tx_timestamp to provide sockcm_cookie instead of
tsflags. And while here fix __sock_tx_timestamp to receive tsflags as
__u32 instead of __u16.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20241001125716.2832769-3-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CAN XL data frames contain an 8-bit virtual CAN network identifier (VCID).
A VCID value of zero represents an 'untagged' CAN XL frame.
To receive and send these optional VCIDs via CAN_RAW sockets a new socket
option CAN_RAW_XL_VCID_OPTS is introduced to define/access VCID content:
- tx: set the outgoing VCID value by the kernel (one fixed 8-bit value)
- tx: pass through VCID values from the user space (e.g. for traffic replay)
- rx: apply VCID receive filter (value/mask) to be passed to the user space
With the 'tx pass through' option CAN_RAW_XL_VCID_TX_PASS all valid VCID
values can be sent, e.g. to replay full qualified CAN XL traffic.
The VCID value provided for the CAN_RAW_XL_VCID_TX_SET option will
override the VCID value in the struct canxl_frame.prio defined for
CAN_RAW_XL_VCID_TX_PASS when both flags are set.
With a rx_vcid_mask of zero all possible VCID values (0x00 - 0xFF) are
passed to the user space when the CAN_RAW_XL_VCID_RX_FILTER flag is set.
Without this flag only untagged CAN XL frames (VCID = 0x00) are delivered
to the user space (default).
The 8-bit VCID is stored inside the CAN XL prio element (only in CAN XL
frames!) to not interfere with other CAN content or the CAN filters
provided by the CAN_RAW sockets and kernel infrastruture.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20240212213550.18516-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
