Existing advertising instances can already hold the maximum extended
advertising payload. When hci_adv_bcast_annoucement() prepends the
Broadcast Announcement service data to that payload, the combined data
may no longer fit in the temporary buffer used to rebuild the
advertising data.
Reject that case before copying the existing payload and report the
failure through the device log. This keeps the existing advertising
data intact and avoids overrunning the temporary buffer.
Fixes: 5725bc6082 ("Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Yuqi Xu <xuyq21@lenovo.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Before resetting or closing the device, protocol counters should also be
zeroed.
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained.
Fixes: 877afadad2 ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
While hci_conn_del() dequeues with data=conn:
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs).
Fixes: c09b80be6f ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Cc: stable@vger.kernel.org
Reported-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes not setting the bit for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
when extended features bit is set otherwise the controller may not
generate HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE causing
hci_le_read_all_remote_features_sync to timeout waiting for it.
Also remove dead code.
Fixes: a106e50be7 ("Bluetooth: HCI: Add support for LL Extended Feature Set")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_run_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites vs. the changes. The only callsite is
hci_abort_conn().
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Cc: stable@vger.kernel.org
Signed-off-by: hkbinbin <hkbinbinbin@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hci_cmd_sync_queue_once() returns with error, the destroy callback
will not be called.
Fix leaking references / memory on these failures.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_queue_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites to handle that.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_run() may run the work immediately if called from existing
sync work (otherwise it queues a new sync work). In this case it fails
to call the destroy() function.
On immediate run, make it behave same way as if item was queued
successfully: call destroy, and return 0.
The only callsite is hci_abort_conn() via hci_cmd_sync_run_once(), and
this changes its return value. However, its return value is not used
except as the return value for hci_disconnect(), and nothing uses the
return value of hci_disconnect(). Hence there should be no behavior
change anywhere.
Fixes: c898f6d7b0 ("Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering).
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
While introducing hci_le_create_conn_sync the functionality
of hci_connect_le was ported to hci_le_create_conn_sync including
the disable of the scan before starting the connection.
When this code was run non synchronously the immediate call that was
setting the flag HCI_LE_SCAN_INTERRUPTED had an impact. Since the
completion handler for the LE_SCAN_DISABLE was not immediately called.
In the completion handler of the LE_SCAN_DISABLE event, this flag is
checked to set the state of the hdev to DISCOVERY_STOPPED.
With the synchronised approach the later setting of the
HCI_LE_SCAN_INTERRUPTED flag has not the same effect. The completion
handler would immediately fire in the LE_SCAN_DISABLE call, check for
the flag, which is then not yet set and do nothing.
To fix this issue and make the function call work as before, we move the
setting of the flag HCI_LE_SCAN_INTERRUPTED before disabling the scan.
Fixes: 8e8b92ee60 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
This fixes the condition for sending the LE Set Host Feature command.
The command is sent to indicate host support for Connected Isochronous
Streams in this case. It has been observed that the system could not
initialize BIS-only capable controllers because the controllers do not
support the command.
As per Core v6.2 | Vol 4, Part E, Table 3.1 the command shall be
supported if CIS Central or CIS Peripheral is supported; otherwise,
the command is optional.
Fixes: 709788b154 ("Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings")
Cc: stable@vger.kernel.org
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
This renames the PHY fields in bt_iso_io_qos to PHYs (plural) since it
represents a bitfield where multiple PHYs can be set and make the same
change also to HCI_OP_LE_SET_CIG_PARAMS since both c_phy and p_phy
fields are bitfields.
This also fixes the assumption that hci_evt_le_cis_established PHYs
fields are compatible with bt_iso_io_qos, they are not, the fields in
hci_evt_le_cis_established represent just a single PHY value so they
need to be converted to bitfield when set in bt_iso_io_qos.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables client to use setsockopt(BT_PHY) to set the connection
packet type/PHY:
Example setting BT_PHY_BR_1M_1SLOT:
< HCI Command: Change Conne.. (0x01|0x000f) plen 4
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
3-DH5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) ncmd 1
Status: Success (0x00)
> HCI Event: Connection Packet Typ.. (0x1d) plen 5
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
Example setting BT_PHY_LE_1M_TX and BT_PHY_LE_1M_RX:
< HCI Command: LE Set PHY (0x08|0x0032) plen 7
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
PHY options preference: Reserved (0x0000)
> HCI Event: Command Status (0x0f) plen 4
LE Set PHY (0x08|0x0032) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 6
LE PHY Update Complete (0x0c)
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
TX PHY: LE 1M (0x01)
RX PHY: LE 1M (0x01)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
1. Implement LE Event Mask to include events required for
LE Channel Sounding
2. Enable Channel Sounding feature bit in the
LE Host Supported Features command
3. Define HCI command and event structures necessary for
LE Channel Sounding functionality
Signed-off-by: Naga Bhavani Akella <naga.akella@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The connection link policy is only set when establishing an outgoing
ACL connection causing connection idle modes not to be available on
incoming connections. Move the setting of the link policy to the
creation of the connection so all ACL connection will use the link
policy set on the HCI device.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enable the PA Sync Lost event mask to ensure PA sync loss is properly
reported and handled.
Fixes: 485e0626e5 ("Bluetooth: hci_event: Fix not handling PA Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for emulating LL Extended Feature Set introduced in 6.0
that adds the following:
Commands:
- HCI_LE_Read_All_Local_Supported_Features(0x2087)(Feature:47,1)
- HCI_LE_Read_All_Remote_Features(0x2088)(Feature:47,2)
Events:
- HCI_LE_Read_All_Remote_Features_Complete(0x2b)(Mask bit:42)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure hci_conn is initialized with the identity address if
a matching IRK exists which avoids the trouble of having to do it at
multiple places which seems to be missing (e.g. CIS, BIS and PA).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it possible to bind to a different destination address
after being connected (BT_CONNECTED, BT_CONNECT2) which then triggers
PAST Sender proceedure to transfer the PA Sync to the destination
address.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
