41 Commits
Author SHA1 Message Date
Christian EggersandLuiz Augusto von Dentz 6851a0c228 Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap
The 'quirks' member already ran out of bits on some platforms some time
ago. Replace the integer member by a bitmap in order to have enough bits
in future. Replace raw bit operations by accessor macros.

Fixes: ff26b2dd65 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING")
Fixes: 127881334e ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE")
Suggested-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16 15:37:53 -04:00
Luiz Augusto von Dentz 936daee9cf Bluetooth: Remove hci_request.{c,h}
This removes hci_request.{c,h} since it shall no longer be used.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15 10:11:35 -04:00
Bastien NoceraandLuiz Augusto von Dentz 7835fcfd13 Bluetooth: Fix TOCTOU in HCI debugfs implementation
struct hci_dev members conn_info_max_age, conn_info_min_age,
le_conn_max_interval, le_conn_min_interval, le_adv_max_interval,
and le_adv_min_interval can be modified from the HCI core code, as well
through debugfs.

The debugfs implementation, that's only available to privileged users,
will check for boundaries, making sure that the minimum value being set
is strictly above the maximum value that already exists, and vice-versa.

However, as both minimum and maximum values can be changed concurrently
to us modifying them, we need to make sure that the value we check is
the value we end up using.

For example, with ->conn_info_max_age set to 10, conn_info_min_age_set()
gets called from vfs handlers to set conn_info_min_age to 8.

In conn_info_min_age_set(), this goes through:
	if (val == 0 || val > hdev->conn_info_max_age)
		return -EINVAL;

Concurrently, conn_info_max_age_set() gets called to set to set the
conn_info_max_age to 7:
	if (val == 0 || val > hdev->conn_info_max_age)
		return -EINVAL;
That check will also pass because we used the old value (10) for
conn_info_max_age.

After those checks that both passed, the struct hci_dev access
is mutex-locked, disabling concurrent access, but that does not matter
because the invalid value checks both passed, and we'll end up with
conn_info_min_age = 8 and conn_info_max_age = 7

To fix this problem, we need to lock the structure access before so the
check and assignment are not interrupted.

This fix was originally devised by the BassCheck[1] team, and
considered the problem to be an atomicity one. This isn't the case as
there aren't any concerns about the variable changing while we check it,
but rather after we check it parallel to another change.

This patch fixes CVE-2024-24858 and CVE-2024-24857.

[1] https://sites.google.com/view/basscheck/

Co-developed-by: Gui-Dong Han <2045gemini@gmail.com>
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Link: https://lore.kernel.org/linux-bluetooth/20231222161317.6255-1-2045gemini@gmail.com/
Link: https://nvd.nist.gov/vuln/detail/CVE-2024-24858
Link: https://lore.kernel.org/linux-bluetooth/20231222162931.6553-1-2045gemini@gmail.com/
Link: https://lore.kernel.org/linux-bluetooth/20231222162310.6461-1-2045gemini@gmail.com/
Link: https://nvd.nist.gov/vuln/detail/CVE-2024-24857
Fixes: 31ad169148 ("Bluetooth: Add conn info lifetime parameters to debugfs")
Fixes: 729a1051da ("Bluetooth: Expose default LE advertising interval via debugfs")
Fixes: 71c3b60ec6 ("Bluetooth: Move BR/EDR debugfs file creation into hci_debugfs.c")
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-03-29 09:48:37 -04:00
Gui-Dong HanandLuiz Augusto von Dentz da9065caa5 Bluetooth: Fix atomicity violation in {min,max}_key_size_set
In min_key_size_set():
    if (val > hdev->le_max_key_size || val < SMP_MIN_ENC_KEY_SIZE)
        return -EINVAL;
    hci_dev_lock(hdev);
    hdev->le_min_key_size = val;
    hci_dev_unlock(hdev);

In max_key_size_set():
    if (val > SMP_MAX_ENC_KEY_SIZE || val < hdev->le_min_key_size)
        return -EINVAL;
    hci_dev_lock(hdev);
    hdev->le_max_key_size = val;
    hci_dev_unlock(hdev);

The atomicity violation occurs due to concurrent execution of set_min and
set_max funcs.Consider a scenario where setmin writes a new, valid 'min'
value, and concurrently, setmax writes a value that is greater than the
old 'min' but smaller than the new 'min'. In this case, setmax might check
against the old 'min' value (before acquiring the lock) but write its
value after the 'min' has been updated by setmin. This leads to a
situation where the 'max' value ends up being smaller than the 'min'
value, which is an inconsistency.

This possible bug is found by an experimental static analysis tool
developed by our team, BassCheck[1]. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. The above
possible bug is reported when our tool analyzes the source code of
Linux 5.17.

To resolve this issue, it is suggested to encompass the validity checks
within the locked sections in both set_min and set_max funcs. The
modification ensures that the validation of 'val' against the
current min/max values is atomic, thus maintaining the integrity of the
settings. With this patch applied, our tool no longer reports the bug,
with the kernel configuration allyesconfig for x86_64. Due to the lack of
associated hardware, we cannot test the patch in runtime testing, and just
verify it according to the code logic.

[1] https://sites.google.com/view/basscheck/

Fixes: 18f81241b7 ("Bluetooth: Move {min,max}_key_size debugfs ...")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 13:00:36 -05:00
Christophe JAILLETandLuiz Augusto von Dentz 82eae9dc43 Bluetooth: hci_debugfs: Use kstrtobool() instead of strtobool()
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.

In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.

While at it, include the corresponding header file (<linux/kstrtox.h>)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11 11:47:44 -07:00
Lanzhe LiandLuiz Augusto von Dentz 3c690a0d64 Bluetooth: fix inconsistent indenting
Fixed a wrong indentation before "return".This line uses a 7 space
indent instead of a tab.

Signed-off-by: Lanzhe Li <u202212060@hust.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23 22:02:14 -07:00
Luiz Augusto von Dentz eeb1aafe97 Bluetooth: hci_sync: Fix not able to set force_static_address
force_static_address shall be writable while hdev is initing but is not
considered powered yet since the static address is written only when
powered.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Brian Gix <brian.gix@intel.com>
2022-12-12 14:19:23 -08:00
Luiz Augusto von Dentz 7096daba73 Bluetooth: hci_debugfs: Fix not checking conn->debugfs
hci_debugfs_create_conn shall check if conn->debugfs has already been
created and don't attempt to overwrite it.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-09-21 15:01:21 -07:00
Luiz Augusto von DentzandMarcel Holtmann 8331dc487f Bluetooth: hci_core: Move all debugfs handling to hci_debugfs.c
This moves hci_debugfs_create_basic to hci_debugfs.c which is where all
the others debugfs entries are handled.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-22 16:17:13 +02:00
Archie PusakaandMarcel Holtmann 3d4f9c0049 Bluetooth: use inclusive language when filtering devices
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
blacklist -> reject list
whitelist -> accept list

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26 07:12:44 +02:00
Meng YuandMarcel Holtmann 149b3f13b4 Bluetooth: Coding style fix
1. Add space when needed;
2. Block comments style fix;
3. Move open brace '{' following function definitions to the next line;
4. Remove unnecessary braces '{}' for single statement blocks.

Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-04-02 11:03:04 +02:00
Jiapeng ZhongandMarcel Holtmann 231ee8bd83 Bluetooth: fix coccicheck warnings debugfs
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.

Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29 16:51:35 +01:00
Claire ChangandMarcel Holtmann 8249331650 Bluetooth: Move force_bredr_smp debugfs into hci_debugfs_create_bredr
Avoid multiple attempts to create the debugfs entry, force_bredr_smp,
by moving it from the SMP registration to the BR/EDR controller init
section. hci_debugfs_create_bredr is only called when HCI_SETUP and
HCI_CONFIG is not set.

Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09 13:52:55 +01:00
Archie PusakaandMarcel Holtmann c2aa30db74 Bluetooth: debugfs option to unset MITM flag
The BT qualification test SM/MAS/PKE/BV-01-C needs us to turn off
the MITM flag when pairing, and at the same time also set the io
capability to something other than no input no output.

Currently the MITM flag is only unset when the io capability is set
to no input no output, therefore the test cannot be executed.

This patch introduces a debugfs option to force MITM flag to be
turned off.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-07 18:32:21 +02:00
Marcel HoltmannandJohan Hedberg 18f81241b7 Bluetooth: Move {min,max}_key_size debugfs into hci_debugfs_create_le
The debugfs entries for {min,max}_key_size are created during SMP
registration and thus it might lead to multiple attempts to create the
same entries. Avoid this by moving them to the LE controller init
section.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-25 16:33:52 +02:00
Alain MichaudandMarcel Holtmann 600a87490f Bluetooth: Implementation of MGMT_OP_SET_BLOCKED_KEYS.
MGMT command is added to receive the list of blocked keys from
user-space.

The list is used to:
1) Block keys from being distributed by the device during
   the ke distribution phase of SMP.
2) Filter out any keys that were previously saved so
   they are no longer used.

Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-15 22:28:41 +01:00
Marcel HoltmannandJohan Hedberg 58a96fc353 Bluetooth: Add debug setting for changing minimum encryption key size
For testing and qualification purposes it is useful to allow changing
the minimum encryption key size value that the host stack is going to
enforce. This adds a new debugfs setting min_encrypt_key_size to achieve
this functionality.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-08-17 13:54:40 +03:00
Spoorthi Ravishankar KoppadandMarcel Holtmann 302975cba1 Bluetooth: Add support for LE ping feature
Changes made to add HCI Write Authenticated Payload timeout
command for LE Ping feature.

As per the Core Specification 5.0 Volume 2 Part E Section 7.3.94,
the following code changes implements
HCI Write Authenticated Payload timeout command for LE Ping feature.

Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06 15:29:12 +02:00
Ankit NavikandMarcel Holtmann cfdb0c2d09 Bluetooth: Store Resolv list size
When the controller supports the Read LE Resolv List size feature, the
maximum list size are read and now stored.

Before patch:
< HCI Command: LE Read White List... (0x08|0x000f) plen 0  #55 [hci0] 17.979791
> HCI Event: Command Complete (0x0e) plen 5                #56 [hci0] 17.980629
      LE Read White List Size (0x08|0x000f) ncmd 1
        Status: Success (0x00)
        Size: 25
< HCI Command: LE Clear White List (0x08|0x0010) plen 0    #57 [hci0] 17.980786
> HCI Event: Command Complete (0x0e) plen 4                #58 [hci0] 17.981627
      LE Clear White List (0x08|0x0010) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0  #59 [hci0] 17.981786
> HCI Event: Command Complete (0x0e) plen 12               #60 [hci0] 17.982636
      LE Read Maximum Data Length (0x08|0x002f) ncmd 1
        Status: Success (0x00)
        Max TX octets: 251
        Max TX time: 17040
        Max RX octets: 251
        Max RX time: 17040

After patch:
< HCI Command: LE Read White List... (0x08|0x000f) plen 0  #55 [hci0] 13.338168
> HCI Event: Command Complete (0x0e) plen 5                #56 [hci0] 13.338842
      LE Read White List Size (0x08|0x000f) ncmd 1
        Status: Success (0x00)
        Size: 25
< HCI Command: LE Clear White List (0x08|0x0010) plen 0    #57 [hci0] 13.339029
> HCI Event: Command Complete (0x0e) plen 4                #58 [hci0] 13.339939
      LE Clear White List (0x08|0x0010) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0  #59 [hci0] 13.340152
> HCI Event: Command Complete (0x0e) plen 5                #60 [hci0] 13.340952
      LE Read Resolving List Size (0x08|0x002a) ncmd 1
        Status: Success (0x00)
        Size: 25
< HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0  #61 [hci0] 13.341180
> HCI Event: Command Complete (0x0e) plen 12               #62 [hci0] 13.341898
      LE Read Maximum Data Length (0x08|0x002f) ncmd 1
        Status: Success (0x00)
        Max TX octets: 251
        Max TX time: 17040
        Max RX octets: 251
        Max RX time: 17040

Signed-off-by: Ankit Navik <ankit.p.navik@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-06 12:40:08 +02:00
Andy ShevchenkoandMarcel Holtmann 3bf5e97d7b Bluetooth: Re-use kstrtobool_from_user()
Re-use kstrtobool_from_user() instead of open coded variant.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-30 08:16:04 +02:00
Andy Shevchenko a08f06bb7a seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro
The DEFINE_SHOW_ATTRIBUTE() helper macro would be useful for current
users, which are many of them, and for new comers to decrease code
duplication.

Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-02-07 12:50:21 +02:00
Andy ShevchenkoandMarcel Holtmann 22b371cbb9 Bluetooth: introduce DEFINE_SHOW_ATTRIBUTE() macro
This macro deduplicates a lot of similar code across the hci_debugfs.c
module. Targeting to be moved to seq_file.h eventually.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 20:20:34 +01:00
Andy ShevchenkoandMarcel Holtmann 8a95079448 Bluetooth: Utilize %*ph specifier
Instead of open coding byte-by-byte printing, re-use %*ph specifier.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:42 +01:00
Marcel HoltmannandJohan Hedberg 5177a83827 Bluetooth: Add debugfs fields for hardware and firmware info
Some Bluetooth controllers allow for reading hardware and firmware
related vendor specific infos. If they are available, then they can be
exposed via debugfs now.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-18 09:33:28 +03:00
Marcel HoltmannandJohan Hedberg c3370de64d Bluetooth: Expose current Device ID information via debugfs
For debugging purposes it is good to be able to read the current
configured Device ID details.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-02 08:40:35 +03:00