Since support for big-endian arm64 kernels was removed, the CPU_LE()
macro now unconditionally emits the code it is passed, and the CPU_BE()
macro now unconditionally discards the code it is passed.
Simplify the assembly code in lib/crypto/arm64/ accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401003331.144065-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since commit aefbab8e77 ("arm64: fpsimd: Preserve/restore kernel mode
NEON at context switch"), kernel-mode NEON sections have been
preemptible on arm64. And since commit 7dadeaa6e8 ("sched: Further
restrict the preemption modes"), voluntary preemption is no longer
supported on arm64 either. Therefore, there's no longer any need to
limit the length of kernel-mode NEON sections on arm64.
Simplify the SHA-3 code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401000548.133151-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since commit aefbab8e77 ("arm64: fpsimd: Preserve/restore kernel mode
NEON at context switch"), kernel-mode NEON sections have been
preemptible on arm64. And since commit 7dadeaa6e8 ("sched: Further
restrict the preemption modes"), voluntary preemption is no longer
supported on arm64 either. Therefore, there's no longer any need to
limit the length of kernel-mode NEON sections on arm64.
Simplify the SHA-512 code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401000548.133151-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since commit aefbab8e77 ("arm64: fpsimd: Preserve/restore kernel mode
NEON at context switch"), kernel-mode NEON sections have been
preemptible on arm64. And since commit 7dadeaa6e8 ("sched: Further
restrict the preemption modes"), voluntary preemption is no longer
supported on arm64 either. Therefore, there's no longer any need to
limit the length of kernel-mode NEON sections on arm64.
Simplify the SHA-256 code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401000548.133151-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since commit aefbab8e77 ("arm64: fpsimd: Preserve/restore kernel mode
NEON at context switch"), kernel-mode NEON sections have been
preemptible on arm64. And since commit 7dadeaa6e8 ("sched: Further
restrict the preemption modes"), voluntary preemption is no longer
supported on arm64 either. Therefore, there's no longer any need to
limit the length of kernel-mode NEON sections on arm64.
Simplify the SHA-1 code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401000548.133151-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since commit aefbab8e77 ("arm64: fpsimd: Preserve/restore kernel mode
NEON at context switch"), kernel-mode NEON sections have been
preemptible on arm64. And since commit 7dadeaa6e8 ("sched: Further
restrict the preemption modes"), voluntary preemption is no longer
supported on arm64 either. Therefore, there's no longer any need to
limit the length of kernel-mode NEON sections on arm64.
Simplify the Poly1305 code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401000548.133151-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since commit aefbab8e77 ("arm64: fpsimd: Preserve/restore kernel mode
NEON at context switch"), kernel-mode NEON sections have been
preemptible on arm64. And since commit 7dadeaa6e8 ("sched: Further
restrict the preemption modes"), voluntary preemption is no longer
supported on arm64 either. Therefore, there's no longer any need to
limit the length of kernel-mode NEON sections on arm64.
Simplify the GHASH and POLYVAL code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401000548.133151-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since commit aefbab8e77 ("arm64: fpsimd: Preserve/restore kernel mode
NEON at context switch"), kernel-mode NEON sections have been
preemptible on arm64. And since commit 7dadeaa6e8 ("sched: Further
restrict the preemption modes"), voluntary preemption is no longer
supported on arm64 either. Therefore, there's no longer any need to
limit the length of kernel-mode NEON sections on arm64.
Simplify the ChaCha code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401000548.133151-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since commit aefbab8e77 ("arm64: fpsimd: Preserve/restore kernel mode
NEON at context switch"), kernel-mode NEON sections have been
preemptible on arm64. And since commit 7dadeaa6e8 ("sched: Further
restrict the preemption modes"), voluntary preemption is no longer
supported on arm64 either. Therefore, there's no longer any need to
limit the length of kernel-mode NEON sections on arm64.
Simplify the AES-CBC-MAC code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260401000548.133151-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm64-optimized SM3 code via arm64-specific
crypto_shash algorithms, instead just implement the sm3_blocks() library
function. This is much simpler, it makes the SM3 library functions be
arm64-optimized, and it fixes the longstanding issue where the
arm64-optimized SM3 code was disabled by default. SM3 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Tweak the SM3 assembly function prototypes to match what the library
expects, including changing the block count from 'int' to 'size_t'.
sm3_ce_transform() had to be updated to access 'x2' instead of 'w2',
while sm3_neon_transform() already used 'x2'.
Remove the CFI stubs which are no longer needed because the SM3 assembly
functions are no longer ever indirectly called.
Remove the dependency on KERNEL_MODE_NEON. It was unnecessary, because
KERNEL_MODE_NEON is always enabled on arm64.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove the "ghash-neon" crypto_shash algorithm. Move the corresponding
assembly code into lib/crypto/, and wire it up to the GHASH library.
This makes the GHASH library be optimized on arm64 (though only with
NEON, not PMULL; for now the goal is just parity with crypto_shash). It
greatly reduces the amount of arm64-specific glue code that is needed,
and it fixes the issue where this optimization was disabled by default.
To integrate the assembly code correctly with the library, make the
following tweaks:
- Change the type of 'blocks' from int to size_t
- Change the types of 'dg' and 'h' to polyval_elem. Note that this
simply reflects the format that the code was already using.
- Remove the 'head' argument, which is no longer needed.
- Remove the CFI stubs, as indirect calls are no longer used.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Currently, some architectures (arm64 and x86) have optimized code for
both GHASH and POLYVAL. Others (arm, powerpc, riscv, and s390) have
optimized code only for GHASH. While POLYVAL support could be
implemented on these other architectures, until then we need to support
the case where arch-optimized functions are present only for GHASH.
Therefore, update the support for arch-optimized POLYVAL functions to
allow architectures to opt into supporting these functions individually.
The new meaning of CONFIG_CRYPTO_LIB_GF128HASH_ARCH is that some level
of GHASH and/or POLYVAL acceleration is provided.
Also provide an implementation of polyval_mul() based on
polyval_blocks_arch(), for when polyval_mul_arch() isn't implemented.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Currently, the standalone GHASH code is coupled with crypto_shash. This
has resulted in unnecessary complexity and overhead, as well as the code
being unavailable to library code such as the AES-GCM library. Like was
done with POLYVAL, it needs to find a new home in lib/crypto/.
GHASH and POLYVAL are closely related and can each be implemented in
terms of each other. Optimized code for one can be reused with the
other. But also since GHASH tends to be difficult to implement directly
due to its unnatural bit order, most modern GHASH implementations
(including the existing arm, arm64, powerpc, and x86 optimized GHASH
code, and the new generic GHASH code I'll be adding) actually
reinterpret the GHASH computation as an equivalent POLYVAL computation,
pre and post-processing the inputs and outputs to map to/from POLYVAL.
Given this close relationship, it makes sense to group the GHASH and
POLYVAL code together in the same module. This gives us a wide range of
options for implementing them, reusing code between the two and properly
utilizing whatever instructions each architecture provides.
Thus, GHASH support will be added to the library module that is
currently called "polyval". Rename it to an appropriate name:
"gf128hash". Rename files, options, functions, etc. where appropriate
to reflect the upcoming sharing with GHASH. (Note: polyval_kunit is not
renamed, as ghash_kunit will be added alongside it instead.)
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
CONFIG_KERNEL_MODE_NEON is always enabled on arm64, and it always has
been since its introduction in 2013. Given that and the fact that the
usefulness of kernel-mode NEON has only been increasing over time,
checking for this option in arm64-specific code is unnecessary. Remove
these checks from lib/crypto/ to simplify the code and prevent any
future bugs where e.g. code gets disabled due to a typo in this logic.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260314175049.26931-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm64-optimized CMAC, XCBC-MAC, and CBC-MAC code
via arm64-specific crypto_shash algorithms, instead just implement the
aes_cbcmac_blocks_arch() library function. This is much simpler, it
makes the corresponding library functions be arm64-optimized, and it
fixes the longstanding issue where this optimized code was disabled by
default. The corresponding algorithms still remain available through
crypto_shash, but individual architectures no longer need to handle it.
Note that to be compatible with the library using 'size_t' lengths, the
type of the return value and 'blocks' parameter to the assembly
functions had to be changed to 'size_t', and the assembly code had to be
updated accordingly to use the corresponding 64-bit registers.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260218213501.136844-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
To migrate the support for CBC-based MACs into libaes, the corresponding
arm64 assembly code needs to be moved there. However, the arm64 AES
assembly code groups many AES modes together; individual modes aren't
easily separable. (This isn't unique to arm64; other architectures
organize their AES modes similarly.)
Since the other AES modes will be migrated into the library eventually
too, just move the full assembly files for the AES modes into the
library. (This is similar to what I already did for PowerPC and SPARC.)
Specifically: move the assembly files aes-ce.S, aes-modes.S, and
aes-neon.S and their build rules; declare the assembly functions in
<crypto/aes.h>; and export the assembly functions from libaes.
Note that the exports and public declarations of the assembly functions
are temporary. They exist only to keep arch/arm64/crypto/ working until
the AES modes are fully moved into the library.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260218213501.136844-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move the ARM64 optimized AES key expansion and single-block AES
en/decryption code into lib/crypto/, wire it up to the AES library API,
and remove the superseded crypto_cipher algorithms.
The result is that both the AES library and crypto_cipher APIs are now
optimized for ARM64, whereas previously only crypto_cipher was (and the
optimizations weren't enabled by default, which this fixes as well).
Note: to see the diff from arch/arm64/crypto/aes-ce-glue.c to
lib/crypto/arm64/aes.h, view this commit with 'git show -M10'.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Migrate the arm64 NEON implementation of NH into lib/crypto/. This
makes the nh() function be optimized on arm64 kernels.
Note: this temporarily makes the adiantum template not utilize the arm64
optimized NH code. This is resolved in a later commit that converts the
adiantum template to use nh() instead of "nhpoly1305".
Link: https://lore.kernel.org/r/20251211011846.8179-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move the arm64 implementations of SHA-3 and POLYVAL to the newly
introduced scoped ksimd API, which replaces kernel_neon_begin() and
kernel_neon_end(). On arm64, this is needed because the latter API
will change in an incompatible manner.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull scoped ksimd API for ARM and arm64 from Ard Biesheuvel:
"Introduce a more strict replacement API for
kernel_neon_begin()/kernel_neon_end() on both ARM and arm64, and
replace occurrences of the latter pair appearing in lib/crypto"
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Before modifying the prototypes of kernel_neon_begin() and
kernel_neon_end() to accommodate kernel mode FP/SIMD state buffers
allocated on the stack, move arm64 to the new 'ksimd' scoped guard API,
which encapsulates the calls to those functions.
For symmetry, do the same for 32-bit ARM too.
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Migrate the arm64 implementation of POLYVAL into lib/crypto/, wiring it
up to the POLYVAL library interface. This makes the POLYVAL library be
properly optimized on arm64.
This drops the arm64 optimizations of polyval in the crypto_shash API.
That's fine, since polyval will be removed from crypto_shash entirely
since it is unneeded there. But even if it comes back, the crypto_shash
API could just be implemented on top of the library API, as usual.
Adjust the names and prototypes of the assembly functions to align more
closely with the rest of the library code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm64-optimized SHA-3 code via arm64-specific
crypto_shash algorithms, instead just implement the sha3_absorb_blocks()
and sha3_keccakf() library functions. This is much simpler, it makes
the SHA-3 library functions be arm64-optimized, and it fixes the
longstanding issue where the arm64-optimized SHA-3 code was disabled by
default. SHA-3 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
Note: to see the diff from arch/arm64/crypto/sha3-ce-glue.c to
lib/crypto/arm64/sha3.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull interleaved SHA-256 hashing support from Eric Biggers:
"Optimize fsverity with 2-way interleaved hashing
Add support for 2-way interleaved SHA-256 hashing to lib/crypto/, and
make fsverity use it for faster file data verification. This improves
fsverity performance on many x86_64 and arm64 processors.
Later, I plan to make dm-verity use this too"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: Use 2-way interleaved SHA-256 hashing when supported
fsverity: Remove inode parameter from fsverity_hash_block()
lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()
lib/crypto: x86/sha256: Add support for 2-way interleaved hashing
lib/crypto: arm64/sha256: Add support for 2-way interleaved hashing
lib/crypto: sha256: Add support for 2-way interleaved hashing
Eric Biggers
Ard BiesheuvelandEric Biggers
Linus Torvalds