For early wq allocation, rescuer initialization is the last step of the
creation of a new wq. Make the behavior the same for all allocations.
Prepare for initializing rescuer's affinities with the default pwq's
affinities.
Prepare for moving the whole workqueue initializing procedure into
wq_pool_mutex and cpu hotplug locks.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
workqueue creation includes adding it to the workqueue list.
Prepare for moving the whole workqueue initializing procedure into
wq_pool_mutex and cpu hotplug locks.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use a simple if-statement to replace the cumbersome goto-statement in
workqueue_set_unbound_cpumask().
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Make workqueue_unbound_exclude_cpumask() and workqueue_set_unbound_cpumask()
only update wq_isolated_cpumask and wq_requested_unbound_cpumask when
workqueue_apply_unbound_cpumask() returns successfully.
Fixes: fe28f631fa94("workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask")
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
On a ~2000 CPU powerpc system, hard lockups have been observed in the
workqueue code when stop_machine runs (in this case due to CPU hotplug).
This is due to lots of CPUs spinning in multi_cpu_stop, calling
touch_nmi_watchdog() which ends up calling wq_watchdog_touch().
wq_watchdog_touch() writes to the global variable wq_watchdog_touched,
and that can find itself in the same cacheline as other important
workqueue data, which slows down operations to the point of lockups.
In the case of the following abridged trace, worker_pool_idr was in
the hot line, causing the lockups to always appear at idr_find.
watchdog: CPU 1125 self-detected hard LOCKUP @ idr_find
Call Trace:
get_work_pool
__queue_work
call_timer_fn
run_timer_softirq
__do_softirq
do_softirq_own_stack
irq_exit
timer_interrupt
decrementer_common_virt
* interrupt: 900 (timer) at multi_cpu_stop
multi_cpu_stop
cpu_stopper_thread
smpboot_thread_fn
kthread
Fix this by having wq_watchdog_touch() only write to the line if the
last time a touch was recorded exceeds 1/4 of the watchdog threshold.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Warn in the case it is called with cpu == -1. This does not appear
to happen anywhere.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
A dying worker is first moved from pool->workers to pool->dying_workers
in set_worker_dying() and removed from pool->dying_workers in
detach_dying_workers(). The whole procedure is in the some lock context
of wq_pool_attach_mutex.
So pool->dying_workers is useless, just remove it and keep the dying
worker in pool->workers after set_worker_dying() and remove it in
detach_dying_workers() with wq_pool_attach_mutex held.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The code to kick off the destruction of workers is now in a process
context (idle_cull_fn()), and the detaching of a worker is not required
to be inside the worker thread now, so just do the detaching directly
in idle_cull_fn().
wake_dying_workers() is renamed to detach_dying_workers() and the unneeded
wakeup in wake_dying_workers() is also removed.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
So that when the rescuer is woken up next time, it will not interrupt
the last working cpu which might be busy on other crucial works but
have nothing to do with the rescuer's incoming works.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The code to kick off the destruction of workers is now in a process
context (idle_cull_fn()), so kthread_stop() can be used in the process
context to replace the work of pool->detach_completion.
The wakeup in wake_dying_workers() is unneeded after this change, but it
is harmless, jut keep it here until next patch renames wake_dying_workers()
rather than renaming it again and again.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Current try_to_grab_pending() activates the inactive item and
subsequently treats it as though it were a standard activated item.
This approach prevents duplicating handling logic for both active and
inactive items, yet the premature activation of an inactive item
triggers trace_workqueue_activate_work(), yielding an unintended user
space visible side effect.
And the unnecessary increment of the nr_active, which is not a simple
counter now, followed by a counteracted decrement, is inefficient and
complicates the code.
Just remove the nr_active manipulation code in grabbing inactive items.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since SLOB was removed, it is not necessary to use call_rcu
when the callback only performs kmem_cache_free. Use
kfree_rcu() directly.
The changes were done using the following Coccinelle semantic patch.
This semantic patch is designed to ignore cases where the callback
function is used in another way.
// <smpl>
@r@
expression e;
local idexpression e2;
identifier cb,f;
position p;
@@
(
call_rcu(...,e2)
|
call_rcu(&e->f,cb@p)
)
@r1@
type T;
identifier x,r.cb;
@@
cb(...) {
(
kmem_cache_free(...);
|
T x = ...;
kmem_cache_free(...,x);
|
T x;
x = ...;
kmem_cache_free(...,x);
)
}
@s depends on r1@
position p != r.p;
identifier r.cb;
@@
cb@p
@script:ocaml@
cb << r.cb;
p << s.p;
@@
Printf.eprintf "Other use of %s at %s:%d\n"
cb (List.hd p).file (List.hd p).line
@depends on r1 && !s@
expression e;
identifier r.cb,f;
position r.p;
@@
- call_rcu(&e->f,cb@p)
+ kfree_rcu(e,f)
@r1a depends on !s@
type T;
identifier x,r.cb;
@@
- cb(...) {
(
- kmem_cache_free(...);
|
- T x = ...;
- kmem_cache_free(...,x);
|
- T x;
- x = ...;
- kmem_cache_free(...,x);
)
- }
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
wq->flags would not change, so it's not necessary to check if WQ_BH
is set in loop for_each_possible_cpu(), move define and set of pools
out of loop to simpliy the code.
Signed-off-by: Wenchao Hao <haowenchao22@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, worker ID formatting is open coded in create_worker(),
init_rescuer() and worker_thread() (for %WORKER_DIE case). The formatted ID
is saved into task->comm and wq_worker_comm() uses it as the base name to
append extra information to when generating the name to be shown to
userspace.
However, TASK_COMM_LEN is only 16 leading to badly truncated names for
rescuers. For example, the rescuer for the inet_frag_wq workqueue becomes:
$ ps -ef | grep '[k]worker/R-inet'
root 483 2 0 Apr26 ? 00:00:00 [kworker/R-inet_]
Even for non-rescue workers, it's easy to run over 15 characters on
moderately large machines.
Fit it by consolidating worker ID formatting into a new helper
format_worker_id() and calling it from wq_worker_comm() to obtain the
untruncated worker ID string.
$ ps -ef | grep '[k]worker/R-inet'
root 60 2 0 12:10 ? 00:00:00 [kworker/R-inet_frag_wq]
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Jan Engelhardt <jengelh@inai.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
The default nna (node_nr_active) is used when the pool isn't tied to a
specific NUMA node. This can happen in the following cases:
1. On NUMA, if per-node pwq init failure and the fallback pwq is used.
2. On NUMA, if a pool is configured to span multiple nodes.
3. On single node setups.
5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for
unbound workqueues") set the default nna->max to min_active because only #1
was being considered. For #2 and #3, using min_active means that the max
concurrency in normal operation is pushed down to min_active which is
currently 8, which can obviously lead to performance issues.
exact value nna->max is set to doesn't really matter. #2 can only happen if
the workqueue is intentionally configured to ignore NUMA boundaries and
there's no good way to distribute max_active in this case. #3 is the default
behavior on single node machines.
Let's set it the default nna->max to max_active. This fixes the artificially
lowered concurrency problem on single node machines and shouldn't hurt
anything for other cases.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Link: https://lore.kernel.org/dm-devel/20240410084531.2134621-1-shinichiro.kawasaki@wdc.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following
kernel oops was observed:
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 8 CPUs
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000803
[..]
Call Trace:
arch_vcpu_is_preempted+0x12/0x80
select_idle_sibling+0x42/0x560
select_task_rq_fair+0x29a/0x3b0
try_to_wake_up+0x38e/0x6e0
kick_pool+0xa4/0x198
__queue_work.part.0+0x2bc/0x3a8
call_timer_fn+0x36/0x160
__run_timers+0x1e2/0x328
__run_timer_base+0x5a/0x88
run_timer_softirq+0x40/0x78
__do_softirq+0x118/0x388
irq_exit_rcu+0xc0/0xd8
do_ext_irq+0xae/0x168
ext_int_handler+0xbe/0xf0
psw_idle_exit+0x0/0xc
default_idle_call+0x3c/0x110
do_idle+0xd4/0x158
cpu_startup_entry+0x40/0x48
rest_init+0xc6/0xc8
start_kernel+0x3c4/0x5e0
startup_continue+0x3c/0x50
The crash is caused by calling arch_vcpu_is_preempted() for an offline
CPU. To avoid this, select the cpu with cpumask_any_and_distribute()
to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in
the pool, skip the assignment.
tj: This doesn't fully fix the bug as CPUs can still go down between picking
the target CPU and the wake call. Fixing that likely requires adding
cpu_online() test to either the sched or s390 arch code. However, regardless
of how that is fixed, workqueue shouldn't be picking a CPU which isn't
online as that would result in unpredictable and worse behavior.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 8639ecebc9 ("workqueue: Implement non-strict affinity scope for unbound workqueues")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
While reviewing users of subsys_virtual_register() I noticed that
wq_sysfs_init() ignores the @groups argument. This looks like a
historical artifact as the original wq_subsys only had one attribute to
register.
On the way to building up an @groups argument to pass to
subsys_virtual_register() a few more cleanups fell out:
* Use DEVICE_ATTR_RO() and DEVICE_ATTR_RW() for
cpumask_{isolated,requested} and cpumask respectively. Rename the
@show and @store methods accordingly.
* Co-locate the attribute definition with the methods. This required
moving wq_unbound_cpumask_show down next to wq_unbound_cpumask_store
(renamed to cpumask_show() and cpumask_store())
* Use ATTRIBUTE_GROUPS() to skip some boilerplate declarations
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Lai JiangshanandTejun Heo
Nicholas PigginandTejun Heo
Julia LawallandTejun Heo
Wenchao HaoandTejun Heo
Linus Torvalds
Sven SchnelleandTejun Heo
ZqiangandTejun Heo
Dan WilliamsandTejun Heo