Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
Since there is no reason to reuse the backup instance, make it readonly
(but erasable). Note that only backup instances are readonly, because
other trace instances will be empty unless it is writable. Only backup
instances have copy entries from the original.
With this change, most of the trace control files are removed from the
backup instance, including eventfs enable/filter etc.
# find /sys/kernel/tracing/instances/backup/events/ | wc -l
4093
# find /sys/kernel/tracing/instances/boot_map/events/ | wc -l
9573
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177502546939.1311542.1826814401724828930.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
trace_trigger= tokenizes bootup_trigger_buf in place and stores pointers
into that buffer for later trigger registration. Repeated trace_trigger=
parameters overwrite the buffer contents from earlier calls, leaving
only the last set of parsed event and trigger strings.
Keep each new trace_trigger= string at the end of bootup_trigger_buf and
parse only the appended range. That preserves the earlier event and
trigger strings while still letting repeated parameters queue additional
boot-time triggers.
This also lets Bootconfig array values work naturally when they expand
to repeated trace_trigger= entries.
Before this change, only the last trace_trigger= instance survived boot.
Link: https://patch.msgid.link/20260330181103.1851230-2-atwellwea@gmail.com
Signed-off-by: Wesley Atwell <atwellwea@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing code provides two functions event_file_file() and
event_file_data() to obtain a trace_event_file pointer from a file struct.
The primary method to use is event_file_file(), as it checks for the
EVENT_FILE_FL_FREED flag to determine whether the event is being removed.
The second function event_file_data() is an optimization for retrieving the
same data when the event_mutex is still held.
In the past, when removing an event directory in remove_event_file_dir(),
the code set i_private to NULL for all event files and readers were
expected to check for this state to recognize that the event is being
removed. In the case of event_id_read(), the value was read using
event_file_data() without acquiring the event_mutex. This required
event_file_data() to use READ_ONCE() when retrieving the i_private data.
With the introduction of eventfs, i_private is assigned when an eventfs
inode is allocated and remains set throughout its lifetime.
Remove the now unnecessary READ_ONCE() access to i_private in both
event_file_file() and event_file_data(). Inline the access to i_private in
remove_event_file_dir(), which allows event_file_data() to handle i_private
solely as a trace_event_file pointer. Add a check in event_file_data() to
ensure that the event_mutex is held and that file->flags doesn't have the
EVENT_FILE_FL_FREED flag set. Finally, move event_file_data() immediately
after event_file_code() since the latter provides a comment explaining how
both functions should be used together.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-5-petr.pavlu@suse.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The event_filter_write() function calls event_file_file() to retrieve
a trace_event_file associated with a given file struct. If a non-NULL
pointer is returned, the function then checks whether the trace_event_file
instance has the EVENT_FILE_FL_FREED flag set. This check is redundant
because event_file_file() already performs this validation and returns NULL
if the flag is set. The err value is also already initialized to -ENODEV.
Remove the unnecessary check for EVENT_FILE_FL_FREED in
event_filter_write().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-4-petr.pavlu@suse.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Multiple events can be enabled on the kernel command line via a comma
separator. But if the are specified one at a time, then only the last
event is enabled. This is because the event names are saved in a temporary
buffer, and each call by the init cmdline code will reset that buffer.
This also affects names in the boot config file, as it may call the
callback multiple times with an example of:
kernel.trace_event = ":mod:rproc_qcom_common", ":mod:qrtr", ":mod:qcom_aoss"
Change the cmdline callback function to append a comma and the next value
if the temporary buffer already has content.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302-trace-events-allow-multiple-modules-v1-1-ce4436e37fb8@oss.qualcomm.com
Signed-off-by: Andrei-Alexandru Tachici <andrei-alexandru.tachici@oss.qualcomm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing_disabled variable is set to one on boot up to prevent some
parts of tracing to access the tracing infrastructure before it is set up.
It also can be set after boot if an anomaly is discovered.
It is currently a static variable in trace.c and can be accessed via a
function call trace_is_disabled(). There's really no reason to use a
function call as the tracing subsystem should be able to access it
directly.
By making the variable accessed directly, code can be moved out of trace.c
without adding overhead of a function call to see if tracing is disabled
or not.
Make tracing_disabled global and remove the tracing_is_disabled() helper
function. Also add some "unlikely()"s around tracing_disabled where it's
checked in hot paths.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.483690153@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
By doing:
# trace-cmd sqlhist -e -n futex_wait select TIMESTAMP_DELTA_USECS as lat from sys_enter_futex as start join sys_exit_futex as end on start.common_pid = end.common_pid
and
# trace-cmd start -e futex_wait -f 'lat > 100' -e page_pool_state_release -f 'pfn == 1'
The output of the show_event_trigger and show_event_filter files are well
aligned because of the inconsistent 'tab' spacing:
~# cat /sys/kernel/tracing/show_event_triggers
syscalls:sys_exit_futex hist:keys=common_pid:vals=hitcount:__lat_12046_2=common_timestamp.usecs-$__arg_12046_1:sort=hitcount:size=2048:clock=global:onmatch(syscalls.sys_enter_futex).trace(futex_wait,$__lat_12046_2) [active]
syscalls:sys_enter_futex hist:keys=common_pid:vals=hitcount:__arg_12046_1=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
~# cat /sys/kernel/tracing/show_event_filters
synthetic:futex_wait (lat > 100)
page_pool:page_pool_state_release (pfn == 1)
This makes it not so easy to read. Instead, force the spacing to be at
least 32 bytes from the beginning (one space if the system:event is longer
than 30 bytes):
~# cat /sys/kernel/tracing/show_event_triggers
syscalls:sys_exit_futex hist:keys=common_pid:vals=hitcount:__lat_8125_2=common_timestamp.usecs-$__arg_8125_1:sort=hitcount:size=2048:clock=global:onmatch(syscalls.sys_enter_futex).trace(futex_wait,$__lat_8125_2) [active]
syscalls:sys_enter_futex hist:keys=common_pid:vals=hitcount:__arg_8125_1=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
~# cat /sys/kernel/tracing/show_event_filters
synthetic:futex_wait (lat > 100)
page_pool:page_pool_state_release (pfn == 1)
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260112153408.18373e73@gandalf.local.home
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To audit active event triggers, userspace currently must traverse the
events/ directory and read each individual trigger file. This is
cumbersome for system-wide auditing or debugging.
Introduce "show_event_triggers" at the trace root directory. This file
displays all events that currently have one or more triggers applied,
alongside the trigger configuration, in a consolidated
system:event [tab] trigger format.
The implementation leverages the existing trace_event_file iterators
and uses the trigger's own print() operation to ensure output
consistency with the per-event trigger files.
Link: https://patch.msgid.link/20260105142939.2655342-3-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, to audit active Ftrace event filters, userspace must
recursively traverse the events/ directory and read each individual
filter file. This is inefficient for monitoring tools and debugging.
Introduce "show_event_filters" at the trace root directory. This file
displays all events that currently have a filter applied, alongside the
actual filter string, in a consolidated system:event [tab] filter
format.
The implementation reuses the existing trace_event_file iterators to
ensure atomic traversal of the event list and utilises guard(rcu)() for
automatic, scope-based protection when accessing volatile filter
strings.
Link: https://patch.msgid.link/20260105142939.2655342-2-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Synthetic events currently do not have a function to register perf events.
This leads to calling the tracepoint register functions with a NULL
function pointer which triggers:
------------[ cut here ]------------
WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272
Modules linked in: kvm_intel kvm irqbypass
CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:tracepoint_add_func+0x357/0x370
Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f
RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000
RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8
RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780
R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a
R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78
FS: 00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0
Call Trace:
<TASK>
tracepoint_probe_register+0x5d/0x90
synth_event_reg+0x3c/0x60
perf_trace_event_init+0x204/0x340
perf_trace_init+0x85/0xd0
perf_tp_event_init+0x2e/0x50
perf_try_init_event+0x6f/0x230
? perf_event_alloc+0x4bb/0xdc0
perf_event_alloc+0x65a/0xdc0
__se_sys_perf_event_open+0x290/0x9f0
do_syscall_64+0x93/0x7b0
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? trace_hardirqs_off+0x53/0xc0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead, have the code return -ENODEV, which doesn't warn and has perf
error out with:
# perf record -e synthetic:futex_wait
Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait).
"dmesg | grep -i perf" may provide additional information.
Ideally perf should support synthetic events, but for now just fix the
warning. The support can come later.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20251216182440.147e4453@gandalf.local.home
Fixes: 4b147936fa ("tracing: Add support for 'synthetic' events")
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When s_start() fails to allocate memory for set_event_iter, it returns NULL
before acquiring event_mutex. However, the corresponding s_stop() function
always tries to unlock the mutex, causing a lock imbalance warning:
WARNING: bad unlock balance detected!
6.17.0-rc7-00175-g2b2e0c04f78c #7 Not tainted
-------------------------------------
syz.0.85611/376514 is trying to release lock (event_mutex) at:
[<ffffffff8dafc7a4>] traverse.part.0.constprop.0+0x2c4/0x650 fs/seq_file.c:131
but there are no more locks to release!
The issue was introduced by commit b355247df1 ("tracing: Cache ':mod:'
events for modules not loaded yet") which added the kzalloc() allocation before
the mutex lock, creating a path where s_start() could return without locking
the mutex while s_stop() would still try to unlock it.
Fix this by unconditionally acquiring the mutex immediately after allocation,
regardless of whether the allocation succeeded.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250929113238.3722055-1-sashal@kernel.org
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull tracing updates from Steven Rostedt:
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen
in two different locations has lead to various issues and
inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for
this single user.
It's been over 10 years. Tooling and scripts should start replacing
the debugfs location with the tracefs one. The reason tracefs was
created in the first place was to allow access to the tracing
facilities without the need to configure debugfs into the kernel.
Using tracefs should now be more robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is
default y, so that the kernel is still built with the automount. This
config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the
following printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number
of events within an event system. Freeing them from softirq context
can potentially cause undesired latency. Use the RCU workqueue to
free them instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time
ago with the idea of "making them visible", but that's not what
memory barriers are for. They are to synchronize access between
different variables. There was no synchronization here making them
pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y
and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with
the following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another
probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no
config option of their own. Add one as they should be a separate
entity.
It's default y to keep with the old kernels but still has
dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to
describe them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment
above pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling
of trace events was first introduced. But there was a bug with this
approach as it only worked for a single instance. When multiple users
required soft disabling and disabling the code was changed to have a
ref count. The SOFT_MODE flag is now set iff the ref count is non
zero. This is redundant and just reading the ref count is good
enough.
- Fix typo in comment
* tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add documentation about eprobes
tracing: Have eprobes have their own config option
tracing: Remove "__attribute__()" from the type field of event format
tracing: Deprecate auto-mounting tracefs in debugfs
tracing: Fix comment in trace_module_remove_events()
tracing: Remove EVENT_FILE_FL_SOFT_MODE flag
tracing: Remove pointless memory barriers
tracing/sched: Remove obsolete comment on suffixes
kernel: trace: preemptirq_delay_test: use offstack cpu mask
tracing: Use queue_rcu_work() to free filters
tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()
With CONFIG_DEBUG_INFO_BTF=y and PAHOLE_HAS_BTF_TAG=y, `__user` is
converted to `__attribute__((btf_type_tag("user")))`. In this case,
some syscall events have it for __user data, like below;
/sys/kernel/tracing # cat events/syscalls/sys_enter_openat/format
name: sys_enter_openat
ID: 720
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:int __syscall_nr; offset:8; size:4; signed:1;
field:int dfd; offset:16; size:8; signed:0;
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
field:int flags; offset:32; size:8; signed:0;
field:umode_t mode; offset:40; size:8; signed:0;
Then the trace event filter fails to set the string acceptable flag
(FILTER_PTR_STRING) to the field and rejects setting string filter;
# echo 'filename.ustring ~ "*ftracetest-dir.wbx24v*"' \
>> events/syscalls/sys_enter_openat/filter
sh: write error: Invalid argument
# cat error_log
[ 723.743637] event filter parse error: error: Expecting numeric field
Command: filename.ustring ~ "*ftracetest-dir.wbx24v*"
Since this __attribute__ makes format parsing complicated and not
needed, remove the __attribute__(.*) from the type string.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/175376583493.1688759.12333973498014733551.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
