Instead of saving off the text and data pointers and using them to compare
with the current boot's text and data pointers, just save off the KASLR
offset. Then that can be used to figure out how to read the previous boots
buffer.
The last_boot_info will now show this offset, but only if it is for a
previous boot:
~# cat instances/boot_mapped/last_boot_info
39000000 [kernel]
~# echo function > instances/boot_mapped/current_tracer
~# cat instances/boot_mapped/last_boot_info
# Current
If the KASLR offset saved is for the current boot, the last_boot_info will
show the value of "current".
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.274956504@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214102820.7509ddea@gandalf.local.home
Fixes: c76883f18e ("ring-buffer: Add test if range of boot buffer is valid")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In the loop of __rb_map_vma(), the 's' variable is calculated from the
same logic that nr_pages is and they both come from nr_subbufs. But the
relationship is not obvious and there's a WARN_ON_ONCE() around the 's'
variable to make sure it never becomes equal to nr_subbufs within the
loop. If that happens, then the code is buggy and needs to be fixed.
The 'page' variable is calculated from cpu_buffer->subbuf_ids[s] which is
an array of 'nr_subbufs' entries. If the code becomes buggy and 's'
becomes equal to or greater than 'nr_subbufs' then this will be an out of
bounds hit before the WARN_ON() is triggered and the code exiting safely.
Make the 'page' initialization consistent with the code logic and assign
it after the out of bounds check.
Link: https://lore.kernel.org/20250110162612.13983-1-aha310510@gmail.com
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
[ sdr: rewrote change log ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently there are two ways of identifying an empty ring-buffer. One
relying on the current status of the commit / reader page
(rb_per_cpu_empty()) and the other on the write and read counters
(rb_num_of_entries() used in rb_get_reader_page()).
with rb_num_of_entries(). This intends to ease later
introduction of ring-buffer writers which are out of the kernel control
and with whom, the only information available is through the meta-page
counters.
Link: https://lore.kernel.org/20250108114536.627715-2-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull trace ring-buffer updates from Steven Rostedt:
- Limit time interrupts are disabled in rb_check_pages()
rb_check_pages() is called after the ring buffer size is updated to
make sure that the ring buffer has not been corrupted. Commit
c2274b908d ("ring-buffer: Fix a race between readers and resize
checks") fixed a race with the check pages and simultaneous resizes
to the ring buffer by adding a raw_spin_lock_irqsave() around the
check operation. Although this was a simple fix, it would hold
interrupts disabled for non determinative amount of time. This could
harm PREEMPT_RT operations.
Instead, modify the logic by adding a counter when the buffer is
modified and to release the raw_spin_lock() at each iteration. It
checks the counter under the lock to see if a modification happened
during the loop, and if it did, it would restart the loop up to 3
times. After 3 times, it will simply exit the check, as it is
unlikely that would ever happen as buffer resizes are rare
occurrences.
- Replace some open coded str_low_high() with the helper
- Fix some documentation/comments
* tag 'trace-ring-buffer-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Correct a grammatical error in a comment
ring-buffer: Use str_low_high() helper in ring_buffer_producer()
ring-buffer: Reorganize kerneldoc parameter names
ring-buffer: Limit time with disabled interrupts in rb_check_pages()
A crash happened when testing cpu hotplug with respect to the memory
mapped ring buffers. It was assumed that the hot plug code was adding a
per CPU buffer that was already created that caused the crash. The real
problem was due to ref counting and was fixed by commit 2cf9733891
("ring-buffer: Fix refcount setting of boot mapped buffers").
When a per CPU buffer is created, it will not be created again even with
CPU hotplug, so the fix to not use CPU hotplug was a red herring. In fact,
it caused only the boot CPU buffer to be created, leaving the other CPU
per CPU buffers disabled.
Revert that change as it was not the culprit of the fix it was intended to
be.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241113230839.6c03640f@gandalf.local.home
Fixes: 912da2c384 ("ring-buffer: Do not have boot mapped buffers hook to CPU hotplug")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function rb_check_pages() validates the integrity of a specified
per-CPU tracing ring buffer. It does so by traversing the underlying
linked list and checking its next and prev links.
To guarantee that the list isn't modified during the check, a caller
typically needs to take cpu_buffer->reader_lock. This prevents the check
from running concurrently, for example, with a potential reader which
can make the list temporarily inconsistent when swapping its old reader
page into the buffer.
A problem with this approach is that the time when interrupts are
disabled is non-deterministic, dependent on the ring buffer size. This
particularly affects PREEMPT_RT because the reader_lock is a raw
spinlock which doesn't become sleepable on PREEMPT_RT kernels.
Modify the check so it still attempts to traverse the entire list, but
gives up the reader_lock between checking individual pages. Introduce
for this purpose a new variable ring_buffer_per_cpu.cnt which is bumped
any time the list is modified. The value is used by rb_check_pages() to
detect such a change and restart the check.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241015112810.27203-1-petr.pavlu@suse.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The boot mapped ring buffer has its buffer mapped at a fixed location
found at boot up. It is not dynamic. It cannot grow or be expanded when
new CPUs come online.
Do not hook fixed memory mapped ring buffers to the CPU hotplug callback,
otherwise it can cause a crash when it tries to add the buffer to the
memory that is already fully occupied.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241008143242.25e20801@gandalf.local.home
Fixes: be68d63a13 ("ring-buffer: Add ring_buffer_alloc_range()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Previously, the mapped ring-buffer layout caused misalignment between
the meta-page and sub-buffers when the sub-buffer size was not a
multiple of PAGE_SIZE. This prevented hardware with larger TLB entries
from utilizing them effectively.
Add a padding with the zero-page between the meta-page and sub-buffers.
Also update the ring-buffer map_test to verify that padding.
Link: https://lore.kernel.org/20240628104611.1443542-1-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The text and data address is saved in the meta data so that it can be used
to know the delta of the text and data addresses of the last boot compared
to the text and data addresses of the current boot. The delta is used to
convert function pointer entries in the ring buffer to something that can
be used by kallsyms (note this only works for built-in functions).
But the saved addresses get reset on boot up. If the buffer is not used
and there's another reboot, then the saved text and data addresses will be
of the last boot and not that of the boot that created the content in the
ring buffer.
To get an idea of the issue:
# trace-cmd start -B boot_mapped -p function
# reboot
# trace-cmd show -B boot_mapped | tail
<...>-1 [000] d..1. 461.983243: native_apic_msr_write <-native_kick_ap
<...>-1 [000] d..1. 461.983244: __pfx_native_apic_msr_eoi <-native_kick_ap
<...>-1 [000] d..1. 461.983244: reserve_irq_vector_locked <-native_kick_ap
<...>-1 [000] d..1. 461.983262: branch_emulate_op <-native_kick_ap
<...>-1 [000] d..1. 461.983262: __ia32_sys_ia32_pread64 <-native_kick_ap
<...>-1 [000] d..1. 461.983263: native_kick_ap <-__smpboot_create_thread
<...>-1 [000] d..1. 461.983263: store_cache_disable <-native_kick_ap
<...>-1 [000] d..1. 461.983279: acpi_power_off_prepare <-native_kick_ap
<...>-1 [000] d..1. 461.983280: __pfx_acpi_ns_delete_node <-acpi_suspend_enter
<...>-1 [000] d..1. 461.983280: __pfx_acpi_os_release_lock <-acpi_suspend_enter
# reboot
# trace-cmd show -B boot_mapped |tail
<...>-1 [000] d..1. 461.983243: 0xffffffffa9669220 <-0xffffffffa965f3db
<...>-1 [000] d..1. 461.983244: 0xffffffffa96690f0 <-0xffffffffa965f3db
<...>-1 [000] d..1. 461.983244: 0xffffffffa9663fa0 <-0xffffffffa965f3db
<...>-1 [000] d..1. 461.983262: 0xffffffffa9672e80 <-0xffffffffa965f3e0
<...>-1 [000] d..1. 461.983262: 0xffffffffa962b940 <-0xffffffffa965f3ec
<...>-1 [000] d..1. 461.983263: 0xffffffffa965f540 <-0xffffffffa96e1362
<...>-1 [000] d..1. 461.983263: 0xffffffffa963c940 <-0xffffffffa965f55b
<...>-1 [000] d..1. 461.983279: 0xffffffffa9ee30c0 <-0xffffffffa965f59b
<...>-1 [000] d..1. 461.983280: 0xffffffffa9f16c10 <-0xffffffffa9ee3157
<...>-1 [000] d..1. 461.983280: 0xffffffffa9ee02e0 <-0xffffffffa9ee3157
By not updating the saved text and data addresses in the meta data at
every boot up and only updating them when the buffer is reset, it
allows multiple boots to see the same data.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20240815113629.0dc90af8@rorschach.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
