While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU.
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 61bbcfb505 ("srcu: Push srcu_node allocation to GP when non-preemptible")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Samir <samir@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Pull RCU updates from Joel Fernandes:
"NOCB CPU management:
- Consolidate rcu_nocb_cpu_offload() and rcu_nocb_cpu_deoffload() to
reduce code duplication
- Extract nocb_bypass_needs_flush() helper to reduce duplication in
NOCB bypass path
rcutorture/torture infrastructure:
- Add NOCB01 config for RCU_LAZY torture testing
- Add NOCB02 config for NOCB poll mode testing
- Add TRIVIAL-PREEMPT config for textbook-style preemptible RCU
torture
- Test call_srcu() with preemption both disabled and enabled
- Remove kvm-check-branches.sh in favor of kvm-series.sh
- Make hangs more visible in torture.sh output
- Add informative message for tests without a recheck file
- Fix numeric test comparison in srcu_lockdep.sh
- Use torture_shutdown_init() in refscale and rcuscale instead of
open-coded shutdown functions
- Fix modulo-zero error in torture_hrtimeout_ns().
SRCU:
- Fix SRCU read flavor macro comments
- Fix s/they disables/they disable/ typo in srcu_read_unlock_fast()
RCU Tasks:
- Document that RCU Tasks Trace grace periods now imply RCU grace
periods
- Remove unnecessary smp_store_release() in cblist_init_generic()"
* tag 'rcu.2026.03.31a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
rcutorture: Test call_srcu() with preemption disabled and not
rcu: Add BOOTPARAM_RCU_STALL_PANIC Kconfig option
torture: Avoid modulo-zero error in torture_hrtimeout_ns()
rcu/nocb: Extract nocb_bypass_needs_flush() to reduce duplication
rcu/nocb: Consolidate rcu_nocb_cpu_offload/deoffload functions
rcu-tasks: Remove unnecessary smp_store_release() in cblist_init_generic()
rcutorture: Add NOCB02 config for nocb poll mode testing
rcutorture: Add NOCB01 config for RCU_LAZY torture testing
rcu-tasks: Document that RCU Tasks Trace grace periods now imply RCU grace periods
srcu: Fix s/they disables/they disable/ typo in srcu_read_unlock_fast()
srcu: Fix SRCU read flavor macro comments
rcuscale: Ditch rcu_scale_shutdown in favor of torture_shutdown_init()
refscale: Ditch ref_scale_shutdown in favor of torture_shutdown_init()
rcutorture: Fix numeric "test" comparison in srcu_lockdep.sh
torture: Print informative message for test without recheck file
torture: Make hangs more visible in torture.sh output
kvm-check-branches.sh: Remove in favor of kvm-series.sh
rcutorture: Add a textbook-style trivial preemptible RCU
This commit tests invoking call_srcu() with preemption both enabled
and disabled, via acquiring of pi lock.
[ Joel: reword commit message. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Add a Kconfig option to set the default value of the
kernel.panic_on_rcu_stall sysctl, allowing the kernel to be built
with panic-on-RCU-stall enabled by default.
This is useful for high-availability systems that require automatic
recovery (via panic_timeout) when a CPU stall is detected, without
needing userspace to configure the sysctl at boot.
This follows the pattern established by BOOTPARAM_SOFTLOCKUP_PANIC
and BOOTPARAM_HUNG_TASK_PANIC. The runtime sysctl can still override
the Kconfig default.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The bypass flush decision logic is duplicated in rcu_nocb_try_bypass()
and nocb_gp_wait() with similar conditions.
This commit therefore extracts the functionality into a common helper
function nocb_bypass_needs_flush() improving the code readability.
A flush_faster parameter is added to controlling the flushing thresholds
and timeouts. This design was in the original commit d1b222c6be
("rcu/nocb: Add bypass callback queueing") to avoid having the GP
kthread aggressively flush the bypass queue.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The rcu_nocb_cpu_offload() and rcu_nocb_cpu_deoffload() functions are
nearly duplicates.
Therefore, extract the common logic into rcu_nocb_cpu_toggle_offload()
which takes an 'offload' boolean, and make both exported functions
simple wrappers.
This eliminates a bunch of duplicate code at the call sites, namely
mutex locking, CPU hotplug locking and CPU online checks.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The cblist_init_generic() is executed during the CPU early boot
phase due to commit:30ef09635b9e ("rcu-tasks: Initialize callback
lists at rcu_init() time"), at this time, only one boot CPU is
online and the irq is disabled. this commit therefore use routine
assignment replace of smp_store_release() and WRITE_ONCE() in the
cblist_init_generic().
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The torture_shutdown_init() function spawns a shutdown kthread in
a manner very similar to that implemented by rcu_scale_shutdown().
This commit therefore re-implements rcu_scale_shutdown() in terms of
torture_shutdown_init().
This patch was generated by Claude given as input the patch making the
same transformation of ref_scale_shutdown().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The torture_shutdown_init() function spawns a shutdown kthread in
a manner very similar to that implemented by ref_scale_shutdown().
This commit therefore re-implements ref_scale_shutdown in terms of
torture_shutdown_init().
The initial draft of this patch was generated by version 2.1.16 of the
Claude AI/LLM, but trained and configured for use by my employer, and
prompted to refer to Linux-kernel source code. This initial draft failed
to provide a forward reference to ref_scale_cleanup(), passed zero to
torture_shutdown_init() for an unwelcome insta-shutdown, and failed to
pass the kvm.sh --duration argument in as a refscale module parameter.
On the other hand, it did catch the need to NULL main_task on the
post-test self-shutdown code path, which I might well have forgotten
to do.
This version of the patch fixes those problems, and in fact very little
of the initial draft remains.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
This commit adds a trivial textbook implementation of preemptible RCU
to rcutorture ("torture_type=trivial-preempt"), similar in spirit to the
existing "torture_type=trivial" textbook implementation of non-preemptible
RCU. Neither trivial RCU implementation has any value for production use,
and are intended only to keep Paul honest in his introductory writings
and presentations.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),
which acquires the workqueue pool->lock.
This causes a lockdep splat when call_srcu() is called with a scheduler
lock held, due to:
call_srcu() [holding pi_lock]
srcu_gp_start_if_needed()
schedule_work() -> pool->lock
workqueue_init() / create_worker() [holding pool->lock]
wake_up_process() -> try_to_wake_up() -> pi_lock
Also add irq_work_sync() to cleanup_srcu_struct() to prevent a
use-after-free if a queued irq_work fires after cleanup begins.
Tested with rcutorture SRCU-T and no lockdep warnings.
[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work
to start process_srcu()" ]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Since commit c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms
of SRCU-fast") we switched to SRCU in BPF. However as BPF instrument can
happen basically everywhere (including where a scheduler lock is held),
call_srcu() now needs to avoid acquiring scheduler lock because
otherwise it could cause deadlock [1]. Fix this by following what the
previous RCU Tasks Trace did: using an irq_work to delay the queuing of
the work to start process_srcu().
[boqun: Apply Joel's feedback]
[boqun: Apply Andrea's test feedback]
Reported-by: Andrea Righi <arighi@nvidia.com>
Closes: https://lore.kernel.org/all/abjzvz_tL_siV17s@gpd4/
Fixes: commit c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
Link: https://lore.kernel.org/rcu/3c4c5a29-24ea-492d-aeee-e0d9605b4183@nvidia.com/ [1]
Suggested-by: Zqiang <qiang.zhang@linux.dev>
Tested-by: Andrea Righi <arighi@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
When the srcutree.convert_to_big and srcutree.big_cpu_lim kernel boot
parameters specify initialization-time allocation of the srcu_node
tree for statically allocated srcu_struct structures (for example, in
DEFINE_SRCU() at build time instead of init_srcu_struct() at runtime),
init_srcu_struct_nodes() will attempt to dynamically allocate this tree
at the first run-time update-side use of this srcu_struct structure,
but while holding a raw spinlock. Because the memory allocator can
acquire non-raw spinlocks, this can result in lockdep splats.
This commit therefore uses the same SRCU_SIZE_ALLOC trick that is used
when the first run-time update-side use of this srcu_struct structure
happens before srcu_init() is called. The actual allocation then takes
place from workqueue context at the ends of upcoming SRCU grace periods.
[boqun: Adjust the sha1 of the Fixes tag]
Fixes: 175b45ed34 ("srcu: Use raw spinlocks so call_srcu() can be used under preempt_disable()")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Tree SRCU has used non-raw spinlocks for many years, motivated by a desire
to avoid unnecessary real-time latency and the absence of any reason to
use raw spinlocks. However, the recent use of SRCU in tracing as the
underlying implementation of RCU Tasks Trace means that call_srcu()
is invoked from preemption-disabled regions of code, which in turn
requires that any locks acquired by call_srcu() or its callees must be
raw spinlocks.
This commit therefore converts SRCU's spinlocks to raw spinlocks.
[boqun: Add Fixes tag]
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
The pattern of checking nocb_defer_wakeup and deleting the timer is
duplicated in __wake_nocb_gp() and nocb_gp_wait(). Extract this into a
common helper function nocb_defer_wakeup_cancel().
This removes code duplication and makes it easier to maintain.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
During callback overload (exceeding qhimark), the NOCB code attempts
opportunistic advancement via rcu_advance_cbs_nowake(). Analysis shows
this code path is practically unreachable and serves no useful purpose.
Testing with 300,000 callback floods showed:
- 30 overload conditions triggered
- 0 advancements actually occurred
While a theoretical window exists where this code could execute (e.g.,
vCPU preemption between gp_seq update and rcu_nocb_gp_cleanup()), even
if it did, the advancement would be redundant. The rcuog kthread must
still run to wake the rcuoc callback thread - we would just be
duplicating work that rcuog will perform when it finally gets to run.
Since this path provides no meaningful benefit and extensive testing
confirms it is never useful, remove it entirely.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
The WakeOvfIsDeferred code path in __call_rcu_nocb_wake() attempts to
wake rcuog when the callback count exceeds qhimark and callbacks aren't
done with their GP (newly queued or awaiting GP). However, a lot of
testing proves this wake is always redundant or useless.
In the flooding case, rcuog is always waiting for a GP to finish. So
waking up the rcuog thread is pointless. The timer wakeup adds overhead,
rcuog simply wakes up and goes back to sleep achieving nothing.
This path also adds a full memory barrier, and additional timer expiry
modifications unnecessarily.
The root cause is that WakeOvfIsDeferred fires when
!rcu_segcblist_ready_cbs() (GP not complete), but waking rcuog cannot
accelerate GP completion.
This commit therefore removes this path.
Tested with rcutorture scenarios: TREE01, TREE05, TREE08 (all NOCB
configurations) - all pass. Also stress tested using a kernel module
that floods call_rcu() to trigger the overload conditions and made the
observations confirming the findings.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
* rcu-misc.20260111a:
rcu: Reduce synchronize_rcu() latency by reporting GP kthread's CPU QS early
srcu: Use suitable gfp_flags for the init_srcu_struct_nodes()
rcu: Fix rcu_read_unlock() deadloop due to softirq
rcutorture: Correctly compute probability to invoke ->exp_current()
rcu: Make expedited RCU CPU stall warnings detect stall-end races
Paul E. McKenneyandBoqun Feng
Linus Torvalds
Gustavo Luiz DuarteandJoel Fernandes
ZqiangandJoel Fernandes
Kees CookandLinus Torvalds
Boqun Feng