Merge cpuidle updates, OPP (operating performance points) library
updates, and updates related to system suspend and hibernation for
7.1-rc1:
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
* pm-cpuidle:
cpuidle: Simplify cpuidle_register_device() with guard()
cpuidle: clean up dead dependencies on CPU_IDLE in Kconfig
intel_idle: Add Panther Lake C-states table
cpuidle: governors: teo: Rearrange stopped tick handling
cpuidle: governors: menu: Refine stopped tick handling
* pm-opp:
OPP: Move break out of scoped_guard in dev_pm_opp_xlate_required_opp()
OPP: debugfs: Use performance level if available to distinguish between rates
* pm-sleep:
PM: hibernate: return -ENODATA if the snapshot image is not loaded
PM: hibernate: x86: Remove inclusion of crypto/hash.h
dev_energymodel_nl_get_perf_domains_doit() calls
em_perf_domain_get_by_id() but does not check the return value before
passing it to __em_nl_get_pd_size(). When a caller supplies a
non-existent perf domain ID, em_perf_domain_get_by_id() returns NULL,
and __em_nl_get_pd_size() immediately dereferences pd->cpus
(struct offset 0x30), causing a NULL pointer dereference.
The sister handler dev_energymodel_nl_get_perf_table_doit() already
handles this correctly via __em_nl_get_pd_table_id(), which returns
NULL and causes the caller to return -EINVAL. Add the same NULL check
in the get-perf-domains do handler.
Fixes: 380ff27af2 ("PM: EM: Add dump to get-perf-domains in the EM YNL spec")
Reported-by: Yi Lai <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/lkml/aXiySM79UYfk+ytd@ly-workstation/
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Cc: 6.19+ <stable@vger.kernel.org> # 6.19+
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260329073615.649976-1-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 35e4a69b20 ("PM: sleep: Allow pm_restrict_gfp_mask()
stacking") introduced refcount-based GFP mask management that warns
when pm_restore_gfp_mask() is called with saved_gfp_count == 0.
Some hibernation paths call pm_restore_gfp_mask() defensively where
the GFP mask may or may not be restricted depending on the execution
path. For example, the uswsusp interface invokes it in
SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release().
Before the stacking change this was a silent no-op; it now triggers
a spurious WARNING.
Remove the WARN_ON() wrapper from the !saved_gfp_count check while
retaining the check itself, so that defensive calls remain harmless
without producing false warnings.
Fixes: 35e4a69b20 ("PM: sleep: Allow pm_restrict_gfp_mask() stacking")
Signed-off-by: Youngjun Park <youngjun.park@lge.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260322120528.750178-1-youngjun.park@lge.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 005e8dddd4 ("PM: hibernate: don't store zero pages in the
image file") added an optimization to skip zero-filled pages in the
hibernation image. On restore, zero pages are handled internally by
snapshot_write_next() in a loop that processes them without returning
to the caller.
With the userspace restore interface, writing the last non-zero page
to /dev/snapshot is followed by the SNAPSHOT_ATOMIC_RESTORE ioctl. At
this point there are no more calls to snapshot_write_next() so any
trailing zero pages are not processed, snapshot_image_loaded() fails
because handle->cur is smaller than expected, the ioctl returns -EPERM
and the image is not restored.
The in-kernel restore path is not affected by this because the loop in
load_image() in swap.c calls snapshot_write_next() until it returns 0.
It is this final call that drains any trailing zero pages.
Fixed by calling snapshot_write_next() in snapshot_write_finalize(),
giving the kernel the chance to drain any trailing zero pages.
Fixes: 005e8dddd4 ("PM: hibernate: don't store zero pages in the image file")
Signed-off-by: Alberto Garcia <berto@igalia.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Link: https://patch.msgid.link/ef5a7c5e3e3dbd17dcb20efaa0c53a47a23498bb.1773075892.git.berto@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
Merge updates related to system suspend and hibernation for
6.20-rc1/7.0-rc1:
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
* pm-sleep:
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
PM: sleep: Do not flag runtime PM workqueue as freezable
The current swap entry allocation/freeing workflow has never had a clear
definition. This makes it hard to debug or add new optimizations.
This commit introduces a proper definition of how swap entries would be
allocated and freed. Now, most operations are folio based, so they will
never exceed one swap cluster, and we now have a cleaner border between
swap and the rest of mm, making it much easier to follow and debug,
especially with new added sanity checks. Also making more optimization
possible.
Swap entry will be mostly freed and free with a folio bound. The folio
lock will be useful for resolving many swap related races.
Now swap allocation (except hibernation) always starts with a folio in the
swap cache, and gets duped/freed protected by the folio lock:
- folio_alloc_swap() - The only allocation entry point now.
Context: The folio must be locked.
This allocates one or a set of continuous swap slots for a folio and
binds them to the folio by adding the folio to the swap cache. The
swap slots' swap count start with zero value.
- folio_dup_swap() - Increase the swap count of one or more entries.
Context: The folio must be locked and in the swap cache. For now, the
caller still has to lock the new swap entry owner (e.g., PTL).
This increases the ref count of swap entries allocated to a folio.
Newly allocated swap slots' count has to be increased by this helper
as the folio got unmapped (and swap entries got installed).
- folio_put_swap() - Decrease the swap count of one or more entries.
Context: The folio must be locked and in the swap cache. For now, the
caller still has to lock the new swap entry owner (e.g., PTL).
This decreases the ref count of swap entries allocated to a folio.
Typically, swapin will decrease the swap count as the folio got
installed back and the swap entry got uninstalled
This won't remove the folio from the swap cache and free the
slot. Lazy freeing of swap cache is helpful for reducing IO.
There is already a folio_free_swap() for immediate cache reclaim.
This part could be further optimized later.
The above locking constraints could be further relaxed when the swap table
is fully implemented. Currently dup still needs the caller to lock the
swap entry container (e.g. PTL), or a concurrent zap may underflow the
swap count.
Some swap users need to interact with swap count without involving folio
(e.g. forking/zapping the page table or mapping truncate without swapin).
In such cases, the caller has to ensure there is no race condition on
whatever owns the swap count and use the below helpers:
- swap_put_entries_direct() - Decrease the swap count directly.
Context: The caller must lock whatever is referencing the slots to
avoid a race.
Typically the page table zapping or shmem mapping truncate will need
to free swap slots directly. If a slot is cached (has a folio bound),
this will also try to release the swap cache.
- swap_dup_entry_direct() - Increase the swap count directly.
Context: The caller must lock whatever is referencing the entries to
avoid race, and the entries must already have a swap count > 1.
Typically, forking will need to copy the page table and hence needs to
increase the swap count of the entries in the table. The page table is
locked while referencing the swap entries, so the entries all have a
swap count > 1 and can't be freed.
Hibernation subsystem is a bit different, so two special wrappers are here:
- swap_alloc_hibernation_slot() - Allocate one entry from one device.
- swap_free_hibernation_slot() - Free one entry allocated by the above
helper.
All hibernation entries are exclusive to the hibernation subsystem and
should not interact with ordinary swap routines.
By separating the workflows, it will be possible to bind folio more
tightly with swap cache and get rid of the SWAP_HAS_CACHE as a temporary
pin.
This commit should not introduce any behavior change
[kasong@tencent.com: fix leak, per Chris Mason. Remove WARN_ON, per Lai Yi]
Link: https://lkml.kernel.org/r/CAMgjq7AUz10uETVm8ozDWcB3XohkOqf0i33KGrAquvEVvfp5cg@mail.gmail.com
[ryncsn@gmail.com: fix KSM copy pages for swapoff, per Chris]
Link: https://lkml.kernel.org/r/aXxkANcET3l2Xu6J@KASONG-MC4
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-14-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Kairui Song <ryncsn@gmail.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: Chris Mason <clm@meta.com>
Cc: Lai Yi <yi1.lai@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since acomp_request_free() checks its argument against NULL, the NULL
pointer checks before calling it added by commit ("7966cf0ebe32 PM:
hibernate: Fix crash when freeing invalid crypto compressor") are
redundant, so drop them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6233709.lOV4Wx5bFT@rafael.j.wysocki
Merge fixes related to the energy model management for 6.19-rc6:
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)
* pm-em:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
Add dump to get-perf-domains, so that a user can fetch either information
about a specific performance domain with do or information about all
performance domains with dump. Share the reply format of do and dump using
perf-domain-attrs, so remove perf-domains. The YNL spec, autogenerated
files, and the do implementation are updated, and the dump implementation
is added.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://patch.msgid.link/20260108053212.642478-5-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The EM YNL specification used many acronyms, including ‘em’, ‘pd’,
‘ps’, etc. While the acronyms are short and convenient, they could be
confusing. So, let’s spell them out to be more specific. The following
changes were made in the spec. Note that the protocol name cannot exceed
GENL_NAMSIZ (16).
em -> dev-energymodel
pds -> perf-domains
pd -> perf-domain
pd-id -> perf-domain-id
pd-table -> perf-table
ps -> perf-state
get-pds -> get-perf-domains
get-pd-table -> get-perf-table
pd-created -> perf-domain-created
pd-updated -> perf-domain-updated
pd-deleted -> perf-domain-deleted
In addition. doc strings were added to the spec. based on the comments in
energy_model.h. Two flag attributes (perf-state-flags and
perf-domain-flags) were added for easily interpreting the bit flags.
Finally, the autogenerated files and em_netlink.c were updated accordingly
to reflect the name changes.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://patch.msgid.link/20260108053212.642478-3-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When ida_alloc() fails in em_create_pd(), the function returns without
freeing the previously allocated 'pd' structure, leading to a memory leak.
The 'pd' pointer is allocated either at line 436 (for CPU devices with
cpumask) or line 442 (for other devices) using kzalloc().
Additionally, the function incorrectly returns -ENOMEM when ida_alloc()
fails, ignoring the actual error code returned by ida_alloc(), which can
fail for reasons other than memory exhaustion.
Fix both issues by:
1. Freeing the 'pd' structure with kfree() when ida_alloc() fails
2. Returning the actual error code from ida_alloc() instead of -ENOMEM
This ensures proper cleanup on the error path and accurate error reporting.
Fixes: cbe5aeedec ("PM: EM: Assign a unique ID when creating a performance domain")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Link: https://patch.msgid.link/20260105103730.65626-1-mrout@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When crypto_alloc_acomp() fails, it returns an ERR_PTR value, not NULL.
The cleanup code in save_compressed_image() and load_compressed_image()
unconditionally calls crypto_free_acomp() without checking for ERR_PTR,
which causes crypto_acomp_tfm() to dereference an invalid pointer and
crash the kernel.
This can be triggered when the compression algorithm is unavailable
(e.g., CONFIG_CRYPTO_LZO not enabled).
Fix by adding IS_ERR_OR_NULL() checks before calling crypto_free_acomp()
and acomp_request_free(), similar to the existing kthread_stop() check.
Fixes: b03d542c3c ("PM: hibernate: Use crypto_acomp interface")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Cc: 6.15+ <stable@vger.kernel.org> # 6.15+
[ rjw: Added 2 empty code lines ]
Link: https://patch.msgid.link/20251230115613.64080-1-mrout@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Till now, the runtime PM workqueue has been flagged as freezable, so it
does not process work items during system-wide PM transitions like
system suspend and resume. The original reason to do that was to
reduce the likelihood of runtime PM getting in the way of system-wide
PM processing, but now it is mostly an optimization because (1) runtime
suspend of devices is prevented by bumping up their runtime PM usage
counters in device_prepare() and (2) device drivers are expected to
disable runtime PM for the devices handled by them before they embark
on system-wide PM activities that may change the state of the hardware
or otherwise interfere with runtime PM. However, it prevents
asynchronous runtime resume of devices from working during system-wide
PM transitions, which is confusing because synchronous runtime resume
is not prevented at the same time, and it also sometimes turns out to
be problematic.
For example, it has been reported that blk_queue_enter() may deadlock
during a system suspend transition because of the pm_request_resume()
usage in it [1]. It may also deadlock during a system resume transition
in a similar way. That happens because the asynchronous runtime resume
of the given device is not processed due to the freezing of the runtime
PM workqueue. While it may be better to address this particular issue
in the block layer, the very presence of it means that similar problems
may be expected to occur elsewhere.
For this reason, remove the WQ_FREEZABLE flag from the runtime PM
workqueue and make device_suspend_late() use the generic variant of
pm_runtime_disable() that will carry out runtime PM of the device
synchronously if there is pending resume work for it.
Also update the comment before the pm_runtime_disable() call in
device_suspend_late(), to document the fact that the runtime PM
should not be expected to work for the device until the end of
device_resume_early(), and update the related documentation.
This change may, even though it is not expected to, uncover some
latent issues related to queuing up asynchronous runtime resume
work items during system suspend or hibernation. However, they
should be limited to the interference between runtime resume and
system-wide PM callbacks in the cases when device drivers start
to handle system-wide PM before disabling runtime PM as described
above.
Link: https://lore.kernel.org/linux-pm/20251126101636.205505-2-yang.yang@vivo.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12794222.O9o76ZdvQC@rafael.j.wysocki
Merge PM QoS updates and a cpupower utility update for 6.19-rc1:
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
* pm-qos:
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
* pm-tools:
tools/power/cpupower: Support building libcpupower statically
Merge energy model management updates and operating performance points
(OPP) library changes for 6.19-rc1:
- Add support for sending netlink notifications to user space on energy
model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
* pm-em:
PM: EM: Add to em_pd_list only when no failure
PM: EM: Notify an event when the performance domain changes
PM: EM: Implement em_notify_pd_created/updated()
PM: EM: Implement em_notify_pd_deleted()
PM: EM: Implement em_nl_get_pd_table_doit()
PM: EM: Implement em_nl_get_pds_doit()
PM: EM: Add an iterator and accessor for the performance domain
PM: EM: Add a skeleton code for netlink notification
PM: EM: Add em.yaml and autogen files
PM: EM: Expose the ID of a performance domain via debugfs
PM: EM: Assign a unique ID when creating a performance domain
* pm-opp:
rust: opp: simplify callers of `to_c_str_array`
OPP: Initialize scope-based pointers inline
rust: opp: fix broken rustdoc link
