Commit db359fccf2 ("mm: introduce a new page type for page pool in
page type") added a page_type field to struct net_iov at the same
offset as struct page::page_type, so that page_pool_set_pp_info() can
call __SetPageNetpp() uniformly on both pages and net_iovs.
The page-type API requires the field to hold the UINT_MAX "no type"
sentinel before a type can be set; for real struct page that invariant
is established by the page allocator on free. struct net_iov is not
allocated through the page allocator, so the field is left as zero
(io_uring zcrx, which uses __GFP_ZERO) or as slab garbage (devmem,
which uses kvmalloc_objs() without zeroing). When the page pool then
calls page_pool_set_pp_info() on a freshly-bound niov,
__SetPageNetpp()'s VM_BUG_ON_PAGE(page->page_type != UINT_MAX) fires
and the kernel BUGs. Triggered in selftests by io_uring zcrx setup
through the fbnic queue restart path:
kernel BUG at ./include/linux/page-flags.h:1062!
RIP: 0010:page_pool_set_pp_info (./include/linux/page-flags.h:1062
net/core/page_pool.c:716)
Call Trace:
<TASK>
net_mp_niov_set_page_pool (net/core/page_pool.c:1360)
io_pp_zc_alloc_netmems (io_uring/zcrx.c:1089 io_uring/zcrx.c:1110)
fbnic_fill_bdq (./include/net/page_pool/helpers.h:160
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:906)
__fbnic_nv_restart (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2470
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2874)
fbnic_queue_start (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2903)
netdev_rx_queue_reconfig (net/core/netdev_rx_queue.c:137)
__netif_mp_open_rxq (net/core/netdev_rx_queue.c:234)
io_register_zcrx (io_uring/zcrx.c:818 io_uring/zcrx.c:903)
__io_uring_register (io_uring/register.c:931)
__do_sys_io_uring_register (io_uring/register.c:1029)
do_syscall_64 (arch/x86/entry/syscall_64.c:63
arch/x86/entry/syscall_64.c:94)
</TASK>
The same path is reachable through devmem dmabuf binding via
netdev_nl_bind_rx_doit() -> net_devmem_bind_dmabuf_to_queue().
Add a net_iov_init() helper that stamps ->owner, ->type and the
->page_type sentinel, and use it from both the devmem and io_uring
zcrx niov init loops.
Fixes: db359fccf2 ("mm: introduce a new page type for page pool in page type")
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260428025320.853452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
net_mp_open_rxq is currently not used in the tree as all callers are
using __net_mp_open_rxq directly, and net_mp_close_rxq is only used
once while all other locations use __net_mp_close_rxq.
Consolidate into a single API, netif_mp_{open,close}_rxq, using the
netif_ prefix to indicate that the caller is responsible for locking.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-6-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The copy fallback path doesn't care about the actual niov size and only
uses first PAGE_SIZE bytes, and any additional space will be wasted.
Since ZCRX_REG_NODEV solely relies on the copy path, it doesn't make
sense to support non-standard rx_buf_len. Reject it for now, and
re-enable once improved.
Fixes: c11728021d5cd ("io_uring/zcrx: implement device-less mode for zcrx")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/3e7652d9c27f8ac5d2b141e3af47971f2771fb05.1774780198.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of peeking into page pool allocation cache directly or via
net_mp_netmem_place_in_cache(), pass a netmem array around. It's a
better intermediate format, e.g. you can have it on stack and reuse the
refilling code and decouples it from page pools a bit more.
It still points into the page pool directly, there will be no additional
copies. As the next step, we can change the callback prototype to take
the netmem array from page pool.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/9d8549adb7ef6672daf2d8a52858ce5926279a82.1774261953.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow creating a zcrx instance without attaching it to a net device.
All data will be copied through the fallback path. The user is also
expected to use ZCRX_CTRL_FLUSH_RQ to handle overflows as it normally
should even with a netdev, but it becomes even more relevant as there
will likely be no one to automatically pick up buffers.
Apart from that, it follows the zcrx uapi for the I/O path, and is
useful for testing, experimentation, and potentially for the copy
receive path in the future if improved.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/674f8ad679c5a0bc79d538352b3042cf0999596e.1774261953.git.asml.silence@gmail.com
[axboe: fix spelling error in uapi header and commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
