mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
master
66
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Jakub Kicinski
|
dd8d4bc28a |
net: remove ax25 and amateur radio (hamradio) subsystem
Remove the amateur radio (AX.25, NET/ROM, ROSE) protocol implementation and all associated hamradio device drivers from the kernel tree. This set of protocols has long been a huge bug/syzbot magnet, and since nobody stepped up to help us deal with the influx of the AI-generated bug reports we need to move it out of tree to protect our sanity. The code is moved to an out-of-tree repo: https://github.com/linux-netdev/mod-orphan if it's cleaned up and reworked there we can accept it back. Minimal stub headers are kept for include/net/ax25.h (AX25_P_IP, AX25_ADDR_LEN, ax25_address) and include/net/rose.h (ROSE_ADDR_LEN) so that the conditional integration code in arp.c and tun.c continues to compile and work when the out-of-tree modules are loaded. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Carlos Bilbao <carlos.bilbao@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20260421021824.1293976-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
 Linus Torvalds
|
23b0f90ba8 |
Merge tag 'sysctl-7.00-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados: - Remove macros from proc handler converters Replace the proc converter macros with "regular" functions. Though it is more verbose than the macro version, it helps when debugging and better aligns with coding-style.rst. - General cleanup Remove superfluous ctl_table forward declarations. Const qualify the memory_allocation_profiling_sysctl and loadpin_sysctl_table arrays. Add missing kernel doc to proc_dointvec_conv. - Testing This series was run through sysctl selftests/kunit test suite in x86_64. And went into linux-next after rc4, giving it a good 3 weeks of testing * tag 'sysctl-7.00-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions sysctl: Replace unidirectional INT converter macros with functions sysctl: Add kernel doc to proc_douintvec_conv sysctl: Replace UINT converter macros with functions sysctl: Add CONFIG_PROC_SYSCTL guards for converter macros sysctl: clarify proc_douintvec_minmax doc sysctl: Return -ENOSYS from proc_douintvec_conv when CONFIG_PROC_SYSCTL=n sysctl: Remove unused ctl_table forward declarations loadpin: Implement custom proc_handler for enforce alloc_tag: move memory_allocation_profiling_sysctls into .rodata sysctl: Add missing kernel-doc for proc_dointvec_conv |
||
 Ethan Nelson-Moore
|
82fff3b055 |
net: ax25: remove plumbing for never-implemented DAMA Master support
The AX25_DAMA_MASTER option has been unimplemented and marked broken
ever since it was introduced in 2007 in commit
|
||
 Joel Granados
|
f7386f545e |
sysctl: Remove unused ctl_table forward declarations
Remove superfluous forward declarations of ctl_table from header files where they are no longer needed. These declarations were left behind after sysctl code refactoring and cleanup. Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Muchun Song <muchun.song@linux.dev> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Joel Granados <joel.granados@kernel.org> |
||
 Murad Masimov
|
2f6efbabce |
ax25: Remove broken autobind
Binding AX25 socket by using the autobind feature leads to memory leaks
in ax25_connect() and also refcount leaks in ax25_release(). Memory
leak was detected with kmemleak:
================================================================
unreferenced object 0xffff8880253cd680 (size 96):
backtrace:
__kmalloc_node_track_caller_noprof (./include/linux/kmemleak.h:43)
kmemdup_noprof (mm/util.c:136)
ax25_rt_autobind (net/ax25/ax25_route.c:428)
ax25_connect (net/ax25/af_ax25.c:1282)
__sys_connect_file (net/socket.c:2045)
__sys_connect (net/socket.c:2064)
__x64_sys_connect (net/socket.c:2067)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
================================================================
When socket is bound, refcounts must be incremented the way it is done
in ax25_bind() and ax25_setsockopt() (SO_BINDTODEVICE). In case of
autobind, the refcounts are not incremented.
This bug leads to the following issue reported by Syzkaller:
================================================================
ax25_connect(): syz-executor318 uses autobind, please contact jreuter@yaina.de
------------[ cut here ]------------
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 5317 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
Modules linked in:
CPU: 0 UID: 0 PID: 5317 Comm: syz-executor318 Not tainted 6.14.0-rc4-syzkaller-00278-gece144f151ac #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
...
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x6af/0x7e0 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4302 [inline]
netdev_put include/linux/netdevice.h:4319 [inline]
ax25_release+0x368/0x960 net/ax25/af_ax25.c:1080
__sock_release net/socket.c:647 [inline]
sock_close+0xbc/0x240 net/socket.c:1398
__fput+0x3e9/0x9f0 fs/file_table.c:464
__do_sys_close fs/open.c:1580 [inline]
__se_sys_close fs/open.c:1565 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1565
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Considering the issues above and the comments left in the code that say:
"check if we can remove this feature. It is broken."; "autobinding in this
may or may not work"; - it is better to completely remove this feature than
to fix it because it is broken and leads to various kinds of memory bugs.
Now calling connect() without first binding socket will result in an
error (-EINVAL). Userspace software that relies on the autobind feature
might get broken. However, this feature does not seem widely used with
this specific driver as it was not reliable at any point of time, and it
is already broken anyway. E.g. ax25-tools and ax25-apps packages for
popular distributions do not use the autobind feature for AF_AX25.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
|
||
 Eric Dumazet
|
95fc45d1de |
ax25: rcu protect dev->ax25_ptr
syzbot found a lockdep issue [1].
We should remove ax25 RTNL dependency in ax25_setsockopt()
This should also fix a variety of possible UAF in ax25.
[1]
WARNING: possible circular locking dependency detected
6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Not tainted
------------------------------------------------------
syz.5.1818/12806 is trying to acquire lock:
ffffffff8fcb3988 (rtnl_mutex){+.+.}-{4:4}, at: ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
but task is already holding lock:
ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline]
ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_AX25){+.+.}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x100 net/core/sock.c:3642
lock_sock include/net/sock.h:1618 [inline]
ax25_kill_by_device net/ax25/af_ax25.c:101 [inline]
ax25_device_event+0x24d/0x580 net/ax25/af_ax25.c:146
notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85
__dev_notify_flags+0x207/0x400
dev_change_flags+0xf0/0x1a0 net/core/dev.c:9026
dev_ifsioc+0x7c8/0xe70 net/core/dev_ioctl.c:563
dev_ioctl+0x719/0x1340 net/core/dev_ioctl.c:820
sock_do_ioctl+0x240/0x460 net/socket.c:1234
sock_ioctl+0x626/0x8e0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (rtnl_mutex){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735
ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
do_sock_setsockopt+0x3af/0x720 net/socket.c:2324
__sys_setsockopt net/socket.c:2349 [inline]
__do_sys_setsockopt net/socket.c:2355 [inline]
__se_sys_setsockopt net/socket.c:2352 [inline]
__x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_AX25);
lock(rtnl_mutex);
lock(sk_lock-AF_AX25);
lock(rtnl_mutex);
*** DEADLOCK ***
1 lock held by syz.5.1818/12806:
#0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline]
#0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574
stack backtrace:
CPU: 1 UID: 0 PID: 12806 Comm: syz.5.1818 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074
check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735
ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
do_sock_setsockopt+0x3af/0x720 net/socket.c:2324
__sys_setsockopt net/socket.c:2349 [inline]
__do_sys_setsockopt net/socket.c:2355 [inline]
__se_sys_setsockopt net/socket.c:2352 [inline]
__x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7b62385d29
Fixes:
|
||
|
Jakub Kicinski
|
654de42f3f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.10 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Duoming Zhou
|
a7d6e36b9a |
ax25: Use kernel universal linked list to implement ax25_dev_list
The origin ax25_dev_list implements its own single linked list, which is complicated and error-prone. For example, when deleting the node of ax25_dev_list in ax25_dev_device_down(), we have to operate on the head node and other nodes separately. This patch uses kernel universal linked list to replace original ax25_dev_list, which make the operation of ax25_dev_list easier. We should do "dev->ax25_ptr = ax25_dev;" and "dev->ax25_ptr = NULL;" while holding the spinlock, otherwise the ax25_dev_device_up() and ax25_dev_device_down() could race. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/85bba3af651ca0e1a519da8d0d715b949891171c.1715247018.git.duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Joel Granados
|
78a7b5dbc0 |
ax.25: x.25: Remove the now superfluous sentinel elements from ctl_table array
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Avoid a buffer overflow when traversing the ctl_table by ensuring that AX25_MAX_VALUES is the same as the size of ax25_param_table. This is done with a BUILD_BUG_ON where ax25_param_table is defined and a CONFIG_AX25_DAMA_SLAVE guard in the unnamed enum definition as well as in the ax25_dev_device_up and ax25_ds_set_timer functions. The overflow happened when the sentinel was removed from ax25_param_table. The sentinel's data element was changed when CONFIG_AX25_DAMA_SLAVE was undefined. This had no adverse effects as it still stopped on the sentinel's null procname but needed to be addressed once the sentinel was removed. Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Eric Dumazet
|
c7154ca8e0 |
x25: preserve const qualifier in [a]x25_sk()
We can change [a]x25_sk() to propagate their argument const qualifier, thanks to container_of_const(). Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Eric Dumazet
|
d7c4c9e075 |
ax25: fix incorrect dev_tracker usage
While investigating a separate rose issue [1], and enabling
CONFIG_NET_DEV_REFCNT_TRACKER=y, Bernard reported an orthogonal ax25 issue [2]
An ax25_dev can be used by one (or many) struct ax25_cb.
We thus need different dev_tracker, one per struct ax25_cb.
After this patch is applied, we are able to focus on rose.
[1] https://lore.kernel.org/netdev/fb7544a1-f42e-9254-18cc-c9b071f4ca70@free.fr/
[2]
[ 205.798723] reference already released.
[ 205.798732] allocated in:
[ 205.798734] ax25_bind+0x1a2/0x230 [ax25]
[ 205.798747] __sys_bind+0xea/0x110
[ 205.798753] __x64_sys_bind+0x18/0x20
[ 205.798758] do_syscall_64+0x5c/0x80
[ 205.798763] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 205.798768] freed in:
[ 205.798770] ax25_release+0x115/0x370 [ax25]
[ 205.798778] __sock_release+0x42/0xb0
[ 205.798782] sock_close+0x15/0x20
[ 205.798785] __fput+0x9f/0x260
[ 205.798789] ____fput+0xe/0x10
[ 205.798792] task_work_run+0x64/0xa0
[ 205.798798] exit_to_user_mode_prepare+0x18b/0x190
[ 205.798804] syscall_exit_to_user_mode+0x26/0x40
[ 205.798808] do_syscall_64+0x69/0x80
[ 205.798812] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 205.798827] ------------[ cut here ]------------
[ 205.798829] WARNING: CPU: 2 PID: 2605 at lib/ref_tracker.c:136 ref_tracker_free.cold+0x60/0x81
[ 205.798837] Modules linked in: rose netrom mkiss ax25 rfcomm cmac algif_hash algif_skcipher af_alg bnep snd_hda_codec_hdmi nls_iso8859_1 i915 rtw88_8821ce rtw88_8821c x86_pkg_temp_thermal rtw88_pci intel_powerclamp rtw88_core snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio coretemp snd_hda_intel kvm_intel snd_intel_dspcfg mac80211 snd_hda_codec kvm i2c_algo_bit drm_buddy drm_dp_helper btusb drm_kms_helper snd_hwdep btrtl snd_hda_core btbcm joydev crct10dif_pclmul btintel crc32_pclmul ghash_clmulni_intel mei_hdcp btmtk intel_rapl_msr aesni_intel bluetooth input_leds snd_pcm crypto_simd syscopyarea processor_thermal_device_pci_legacy sysfillrect cryptd intel_soc_dts_iosf snd_seq sysimgblt ecdh_generic fb_sys_fops rapl libarc4 processor_thermal_device intel_cstate processor_thermal_rfim cec snd_timer ecc snd_seq_device cfg80211 processor_thermal_mbox mei_me processor_thermal_rapl mei rc_core at24 snd intel_pch_thermal intel_rapl_common ttm soundcore int340x_thermal_zone video
[ 205.798948] mac_hid acpi_pad sch_fq_codel ipmi_devintf ipmi_msghandler drm msr parport_pc ppdev lp parport ramoops pstore_blk reed_solomon pstore_zone efi_pstore ip_tables x_tables autofs4 hid_generic usbhid hid i2c_i801 i2c_smbus r8169 xhci_pci ahci libahci realtek lpc_ich xhci_pci_renesas [last unloaded: ax25]
[ 205.798992] CPU: 2 PID: 2605 Comm: ax25ipd Not tainted 5.18.11-F6BVP #3
[ 205.798996] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CK3, BIOS 5.011 09/16/2020
[ 205.798999] RIP: 0010:ref_tracker_free.cold+0x60/0x81
[ 205.799005] Code: e8 d2 01 9b ff 83 7b 18 00 74 14 48 c7 c7 2f d7 ff 98 e8 10 6e fc ff 8b 7b 18 e8 b8 01 9b ff 4c 89 ee 4c 89 e7 e8 5d fd 07 00 <0f> 0b b8 ea ff ff ff e9 30 05 9b ff 41 0f b6 f7 48 c7 c7 a0 fa 4e
[ 205.799008] RSP: 0018:ffffaf5281073958 EFLAGS: 00010286
[ 205.799011] RAX: 0000000080000000 RBX: ffff9a0bd687ebe0 RCX: 0000000000000000
[ 205.799014] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 00000000ffffffff
[ 205.799016] RBP: ffffaf5281073a10 R08: 0000000000000003 R09: fffffffffffd5618
[ 205.799019] R10: 0000000000ffff10 R11: 000000000000000f R12: ffff9a0bc53384d0
[ 205.799022] R13: 0000000000000282 R14: 00000000ae000001 R15: 0000000000000001
[ 205.799024] FS: 0000000000000000(0000) GS:ffff9a0d0f300000(0000) knlGS:0000000000000000
[ 205.799028] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 205.799031] CR2: 00007ff6b8311554 CR3: 000000001ac10004 CR4: 00000000001706e0
[ 205.799033] Call Trace:
[ 205.799035] <TASK>
[ 205.799038] ? ax25_dev_device_down+0xd9/0x1b0 [ax25]
[ 205.799047] ? ax25_device_event+0x9f/0x270 [ax25]
[ 205.799055] ? raw_notifier_call_chain+0x49/0x60
[ 205.799060] ? call_netdevice_notifiers_info+0x52/0xa0
[ 205.799065] ? dev_close_many+0xc8/0x120
[ 205.799070] ? unregister_netdevice_many+0x13d/0x890
[ 205.799073] ? unregister_netdevice_queue+0x90/0xe0
[ 205.799076] ? unregister_netdev+0x1d/0x30
[ 205.799080] ? mkiss_close+0x7c/0xc0 [mkiss]
[ 205.799084] ? tty_ldisc_close+0x2e/0x40
[ 205.799089] ? tty_ldisc_hangup+0x137/0x210
[ 205.799092] ? __tty_hangup.part.0+0x208/0x350
[ 205.799098] ? tty_vhangup+0x15/0x20
[ 205.799103] ? pty_close+0x127/0x160
[ 205.799108] ? tty_release+0x139/0x5e0
[ 205.799112] ? __fput+0x9f/0x260
[ 205.799118] ax25_dev_device_down+0xd9/0x1b0 [ax25]
[ 205.799126] ax25_device_event+0x9f/0x270 [ax25]
[ 205.799135] raw_notifier_call_chain+0x49/0x60
[ 205.799140] call_netdevice_notifiers_info+0x52/0xa0
[ 205.799146] dev_close_many+0xc8/0x120
[ 205.799152] unregister_netdevice_many+0x13d/0x890
[ 205.799157] unregister_netdevice_queue+0x90/0xe0
[ 205.799161] unregister_netdev+0x1d/0x30
[ 205.799165] mkiss_close+0x7c/0xc0 [mkiss]
[ 205.799170] tty_ldisc_close+0x2e/0x40
[ 205.799173] tty_ldisc_hangup+0x137/0x210
[ 205.799178] __tty_hangup.part.0+0x208/0x350
[ 205.799184] tty_vhangup+0x15/0x20
[ 205.799188] pty_close+0x127/0x160
[ 205.799193] tty_release+0x139/0x5e0
[ 205.799199] __fput+0x9f/0x260
[ 205.799203] ____fput+0xe/0x10
[ 205.799208] task_work_run+0x64/0xa0
[ 205.799213] do_exit+0x33b/0xab0
[ 205.799217] ? __handle_mm_fault+0xc4f/0x15f0
[ 205.799224] do_group_exit+0x35/0xa0
[ 205.799228] __x64_sys_exit_group+0x18/0x20
[ 205.799232] do_syscall_64+0x5c/0x80
[ 205.799238] ? handle_mm_fault+0xba/0x290
[ 205.799242] ? debug_smp_processor_id+0x17/0x20
[ 205.799246] ? fpregs_assert_state_consistent+0x26/0x50
[ 205.799251] ? exit_to_user_mode_prepare+0x49/0x190
[ 205.799256] ? irqentry_exit_to_user_mode+0x9/0x20
[ 205.799260] ? irqentry_exit+0x33/0x40
[ 205.799263] ? exc_page_fault+0x87/0x170
[ 205.799268] ? asm_exc_page_fault+0x8/0x30
[ 205.799273] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 205.799277] RIP: 0033:0x7ff6b80eaca1
[ 205.799281] Code: Unable to access opcode bytes at RIP 0x7ff6b80eac77.
[ 205.799283] RSP: 002b:00007fff6dfd4738 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 205.799287] RAX: ffffffffffffffda RBX: 00007ff6b8215a00 RCX: 00007ff6b80eaca1
[ 205.799290] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001
[ 205.799293] RBP: 0000000000000001 R08: ffffffffffffff80 R09: 0000000000000028
[ 205.799295] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff6b8215a00
[ 205.799298] R13: 0000000000000000 R14: 00007ff6b821aee8 R15: 00007ff6b821af00
[ 205.799304] </TASK>
Fixes:
|
||
|
Duoming Zhou
|
7d8a3a477b |
ax25: Fix ax25 session cleanup problems
There are session cleanup problems in ax25_release() and ax25_disconnect(). If we setup a session and then disconnect, the disconnected session is still in "LISTENING" state that is shown below. Active AX.25 sockets Dest Source Device State Vr/Vs Send-Q Recv-Q DL9SAU-4 DL9SAU-3 ??? LISTENING 000/000 0 0 DL9SAU-3 DL9SAU-4 ??? LISTENING 000/000 0 0 The first reason is caused by del_timer_sync() in ax25_release(). The timers of ax25 are used for correct session cleanup. If we use ax25_release() to close ax25 sessions and ax25_dev is not null, the del_timer_sync() functions in ax25_release() will execute. As a result, the sessions could not be cleaned up correctly, because the timers have stopped. In order to solve this problem, this patch adds a device_up flag in ax25_dev in order to judge whether the device is up. If there are sessions to be cleaned up, the del_timer_sync() in ax25_release() will not execute. What's more, we add ax25_cb_del() in ax25_kill_by_device(), because the timers have been stopped and there are no functions that could delete ax25_cb if we do not call ax25_release(). Finally, we reorder the position of ax25_list_lock in ax25_cb_del() in order to synchronize among different functions that call ax25_cb_del(). The second reason is caused by improper check in ax25_disconnect(). The incoming ax25 sessions which ax25->sk is null will close heartbeat timer, because the check "if(!ax25->sk || ..)" is satisfied. As a result, the session could not be cleaned up properly. In order to solve this problem, this patch changes the improper check to "if(ax25->sk && ..)" in ax25_disconnect(). What`s more, the ax25_disconnect() may be called twice, which is not necessary. For example, ax25_kill_by_device() calls ax25_disconnect() and sets ax25->state to AX25_STATE_0, but ax25_release() calls ax25_disconnect() again. In order to solve this problem, this patch add a check in ax25_release(). If the flag of ax25->sk equals to SOCK_DEAD, the ax25_disconnect() in ax25_release() should not be executed. Fixes: |
||
|
Jakub Kicinski
|
c59400a68c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Duoming Zhou
|
87563a043c |
ax25: fix reference count leaks of ax25_dev
The previous commit |
||
|
Duoming Zhou
|
d01ffb9eee |
ax25: add refcount in ax25_dev to avoid UAF bugs
If we dereference ax25_dev after we call kfree(ax25_dev) in
ax25_dev_device_down(), it will lead to concurrency UAF bugs.
There are eight syscall functions suffer from UAF bugs, include
ax25_bind(), ax25_release(), ax25_connect(), ax25_ioctl(),
ax25_getname(), ax25_sendmsg(), ax25_getsockopt() and
ax25_info_show().
One of the concurrency UAF can be shown as below:
(USE) | (FREE)
| ax25_device_event
| ax25_dev_device_down
ax25_bind | ...
... | kfree(ax25_dev)
ax25_fillin_cb() | ...
ax25_fillin_cb_from_dev() |
... |
The root cause of UAF bugs is that kfree(ax25_dev) in
ax25_dev_device_down() is not protected by any locks.
When ax25_dev, which there are still pointers point to,
is released, the concurrency UAF bug will happen.
This patch introduces refcount into ax25_dev in order to
guarantee that there are no pointers point to it when ax25_dev
is released.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Jakub Kicinski
|
560e08eda7 |
net: ax25: remove route refcount
Nothing takes the refcount since v4.9. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Eric Dumazet
|
66ce07f780 |
ax25: add net device refcount tracker
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
c045ad2cc0 |
ax25: constify dev_addr passing
In preparation for netdev->dev_addr being constant make all relevant arguments in AX25 constant. Modify callers as well (netrom, rose). Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
63530aba78 |
ax25: fix possible use-after-free
syzbot found that ax25 routes where not properly protected against concurrent use [1]. In this particular report the bug happened while copying ax25->digipeat. Fix this problem by making sure we call ax25_get_route() while ax25_route_lock is held, so that no modification could happen while using the route. The current two ax25_get_route() callers do not sleep, so this change should be fine. Once we do that, ax25_get_route() no longer needs to grab a reference on the found route. [1] ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline] BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113 Read of size 66 at addr ffff888066641a80 by task syz-executor2/531 ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x24/0x50 mm/kasan/common.c:130 memcpy include/linux/string.h:352 [inline] kmemdup+0x42/0x60 mm/util.c:113 kmemdup include/linux/string.h:425 [inline] ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224 __sys_connect+0x357/0x490 net/socket.c:1664 __do_sys_connect net/socket.c:1675 [inline] __se_sys_connect net/socket.c:1672 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1672 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458099 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099 RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4 R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff Allocated by task 526: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:496 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504 ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609 kmalloc include/linux/slab.h:545 [inline] ax25_rt_add net/ax25/ax25_route.c:95 [inline] ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763 sock_do_ioctl+0xe2/0x400 net/socket.c:950 sock_ioctl+0x32f/0x6c0 net/socket.c:1074 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de Freed by task 550: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466 __cache_free mm/slab.c:3487 [inline] kfree+0xcf/0x230 mm/slab.c:3806 ax25_rt_add net/ax25/ax25_route.c:92 [inline] ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763 sock_do_ioctl+0xe2/0x400 net/socket.c:950 sock_ioctl+0x32f/0x6c0 net/socket.c:1074 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888066641a80 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of 96-byte region [ffff888066641a80, ffff888066641ae0) The buggy address belongs to the page: page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0 flags: 0x1fffc0000000200(slab) ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0 raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc >ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Christoph Hellwig
|
fddda2b7b5 |
proc: introduce proc_create_seq{,_data}
Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
||
 David Ahern
|
19ff13f2a4 |
net: Make ax25_ptr depend on CONFIG_AX25
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
 Reshetova, Elena
|
b6d52ede22 |
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Reshetova, Elena
|
39f25d42c0 |
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Reshetova, Elena
|
07f2282fc6 |
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |