The recently added v4l2_subdev_get_frame_desc_passthrough() can be used
directly as an implementation for .get_frame_desc subdev op. However, in
some cases the drivers may want to add some customizations, while the
bulk of the work is still identical to what
v4l2_subdev_get_frame_desc_passthrough() does. Current locking scheme
makes this impossible to do properly.
Split v4l2_subdev_get_frame_desc_passthrough() into two functions:
__v4l2_subdev_get_frame_desc_passthrough(), which takes a locked subdev
state as a parameter, instead of locking and getting the active state
internally. Other than that, it does the same as
v4l2_subdev_get_frame_desc_passthrough() used to do.
v4l2_subdev_get_frame_desc_passthrough(), which locks the active state
and calls __v4l2_subdev_get_frame_desc_passthrough().
In other words, v4l2_subdev_get_frame_desc_passthrough() works as
before, but drivers can now alternatively add custom .get_frame_desc
code and call v4l2_subdev_get_frame_desc_passthrough().
An example use case is with DS90UB953 serializer: in normal use the
serializer passes through everything, but when test-pattern-generator
(TPG) is used, an internal TPG source is used. After this commit, the
UB953 get_frame_desc() can lock the state, look at the routing table to
see if we're in normal or TPG mode, then either call
__v4l2_subdev_get_frame_desc_passthrough() if in normal mode, or
construct a TPG frame desc if in TPG mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
[Sakari Ailus: Rebase on an earlier remote source pad error code fix.]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In general drivers get their firmware graph endpoints from system
firmware, but on some systems this information is conveyed to drivers via
software nodes. The software nodes may be instantiated only after the
drivers are first probed, requiring drivers to explicitly issue
-EPROBE_DEFER when endpoints aren't found.
Instead of doing this in all (or at least most) drivers, make v4l2-fwnode
endpoint parsing functions v4l2_fwnode_endpoint_parse() and
v4l2_fwnode_endpoint_alloc_parse() return -EPROBE_DEFER when an endpoint
is NULL.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
sensor:increase IR_MAX_DURATION to 1000ms
to fix long IR remote timeouts Certain infrared remotes
(e.g., brand-specific smart home remotes, custom consumer electronics)
send extended code sequences that exceed the default 500ms
IR_MAX_DURATION threshold. This causes the kernel's raw
IR driver to discard incomplete code, resulting in unrecognized commands.
Increase IR_MAX_DURATION to 1000ms:
- Aligns with common extended IR protocol specs
(most long sequences use 700-900ms)
- No impact on standard remotes
(all mainstream IR codes are <500ms)
- Validated on vivo X200 and vivo X300,
resolves timeout issues without regressions
Signed-off-by: LiPeng Huang <huanglipeng@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Pull media updates from Mauro Carvalho Chehab:
- Add support for GMSL1 and GMSL‑coax modules (PCI mgb4)
- Add driver for TI VIP
- AV1 – first kernel support (pixel‑format, decoder, transcoder)
- Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1)
- Synopsys CSI‑2 receiver driver
- Verisilicon & rkvdec – major fixes and enhancements
- IPU6 (and 7) fixes and preparation for metadata
- omap3isp: v4l2-compliance updates
- Fix DVB streaming, drop wait_prepare/finish (dvb/vb2)
* tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits)
media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer
media: uvcvideo: Fix allocation for small frame sizes
media: uvcvideo: Return queued buffers on start_streaming() failure
media: uvcvideo: Create an ID namespace for streaming output terminals
media: rkvdec: Add HEVC support for the VDPU383 variant
media: rkvdec: Add HEVC support for the VDPU381 variant
media: rkvdec: Add H264 support for the VDPU383 variant
media: rkvdec: Add H264 support for the VDPU381 variant
media: rkvdec: Disable multicore support
media: rkvdec: Enable all clocks without naming them
media: rkvdec: Support per-variant interrupt handler
media: rkvdec: Add RCB and SRAM support
media: rkvdec: Add variant specific coded formats list
media: rkvdec: Move hevc functions to common file
media: rkvdec: Move h264 functions to common file
media: rkvdec: Use structs to represent the HW RPS
media: rkvdec: Move cabac tables to their own source file
media: rkvdec: Switch to using structs instead of writel
media: visl: Add HEVC short and long term RPS sets
media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls
...
v4l2_fwnode_endpoint_parse() and v4l2_fwnode_endpoint_alloc_parse() take
a fwnode as the first argument and leave it up to the caller to check a
valid fwnode has been obtained through various means. Instead, add a check
here so the callers won't need to do that anymore.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vast majority of the callers of v4l2_ctrl_new_fwnode_properties() do
check the returned error code but the function does not set the control
handler's error on failure. This will make error handling more complicated
and prone for bugs.
Always assign the control handler's error field on error in
v4l2_ctrl_new_fwnode_properties().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Adding a reference count to the v4l2_m2m_dev structure allow safely
sharing it across multiple hardware nodes. This can be used to prevent
running jobs concurrently on m2m cores that have some internal resource
sharing.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typos in v4l2_m2m_put documentation]
Keep track of the number of requests and request objects of a media
device. Helps to verify that all request-related memory is freed.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
By default when the last request object is completed, the whole
request completes as well.
But sometimes you want to delay this completion to an arbitrary point in
time so add a manual complete mode for this.
In req_queue the driver marks the request for manual completion by
calling media_request_mark_manual_completion, and when the driver
wants to manually complete the request it calls
media_request_manual_complete().
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Drop the wait_prepare/finish callbacks. Instead require that the vb2_queue
lock field is always set and use that lock when waiting for buffers to
arrive.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since vb2 now relies on the presence of the vb2_queue lock
field and there are no more drivers that use these helpers, it is safe
to drop them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Set the queue lock to &ctx->mutex, which makes it possible to drop
the wait_prepare/finish callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the buffers are being filled until full, which works fine
for the transport stream, but not when reading sections, those have
to be returned to userspace immediately, otherwise dvbv5-scan will
just wait forever.
Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether
the buffer must be flushed or wait until it is full.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_isp_params_block_info structure contains validation information
that apply to a block -type- and not only to a specific ISP block
implementation.
Clarify this by renaming v4l2_isp_params_block_info in
v4l2_isp_params_block_type_info and update the documentation and the
users of v4l2-isp accordingly.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sometimes, users will not use all of the MIPI CSI 2 lanes available when
connecting to the MIPI CSI receiver of their device. Add a helper
function that checks the mbus_config for the device driver to allow
users to define the number of active data lanes through the
get_mbus_config op.
If the driver does not implement this op, fall back to using the maximum
number of lanes available.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vbi_fops stored in struct saa7146_ext_vv is a full
v4l2_file_operations, but only its .write field is used. Replace it with
a single vbi_write function pointer to save memory.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Retain the constness of the graph objects and interfaces in macros to
obtain their containers, by switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Retain the constness of the object in media_entity_to_video_device() and
to_video_device(), by switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Retain the constness of the object in media_entity_to_v4l2_subdev(), by
switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The v4l2_m2m_buf_copy_metadata() function takes a boolean
copy_frame_flags argument. When true, it causes the function to copy the
V4L2_BUF_FLAG_KEYFRAME, V4L2_BUF_FLAG_BFRAME and V4L2_BUF_FLAG_PFRAME
flags from the output buffer to the capture buffer.
There is no use cases in any upstream driver for copying the flags.
KEY/P/B frames are properties of the bitstream buffer in some formats.
Once decoded, this is no longer a property of the video frame and should
be discarded.
It was considered useful to know if an uncompressed frame was decoded
from a KEY/P/B compressed frame, and to preserve that information if
that same uncompressed frame was passed through another M2M device (e.g.
a scaler). However, the V4L2 documentation makes it clear that the flags
are meant for compressed frames only.
Drop the copy_frame_flags argument from v4l2_m2m_buf_copy_metadata().
The change to drivers was performed with the following Coccinelle
semantic patch:
@@
expression src;
expression dst;
expression flag;
@@
- v4l2_m2m_buf_copy_metadata(src, dst, flag);
+ v4l2_m2m_buf_copy_metadata(src, dst);
include/media/v4l2-mem2mem.h and drivers/media/v4l2-core/v4l2-mem2mem.c
have been updated manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Tomi Valkeinen
Sakari Ailus
LiPeng Huang
Sean Young
Linus Torvalds
Nicolas Dufresne
Hans Verkuil
Mauro Carvalho Chehab
Hans Verkuil
Jacopo Mondi
Isaac Scott
Laurent Pinchart